STM32F103VGT6J vs STM32F103VGT7 Vergleich
Detaillierter Direktvergleich von STM32F103VGT6J von STMicroelectronics und STM32F103VGT7 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F103VGT6J - 72MHz Cortex-M3 1MB MCU | STMicroelectronics
STM32F103VGT6J ✓ AktivSTMicroelectronics
STM32F103VGT7 - 72MHz Cortex-M3 MCU 1MB Flash 100-LQFP | ST
STM32F103VGT7 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F103VGT6J | STM32F103VGT7 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 32-bit ARM Cortex-M3 microcontroller | — |
| Manufacturer | STMicroelectronics | — |
| Series | STM32F1 | — |
| Maximum CPU Frequency | 72 MHz | — |
| CPU Core | ARM Cortex-M3 | — |
| Flash Memory | 1 MB (1M x 8 bits) | — |
| Versorgungsspannung | 3.3 V | — |
| Gehäuse | 100-LQFP (14 x 14 mm) | 100-LQFP (14x14 mm) |
| Montageart | Surface mount | Surface Mount |
| Pin-Anzahl | 100 pins | — |
| Programmable I/O | [DATA_NEEDED: programmable I/O count] | — |
| SRAM | [DATA_NEEDED: SRAM capacity] | 96 KB |
| USB Interface | Supported | — |
| CAN Interface | Supported | — |
| Motor-Control Suitability | Supported | — |
| Product Line | Mainstream Performance | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Core | — | ARM Cortex-M3 |
| Core Architecture | — | 32-bit RISC, Harvard bus |
| Maximum CPU Clock | — | 72 MHz |
| Performance | — | 1.25 DMIPS/MHz (90 DMIPS) |
| Program Memory | — | 1 MB Flash |
| Operating Voltage | — | 2.0 V to 3.6 V |
| Betriebstemperatur | — | -40 C to +105 C |
| GPIO Count | — | 80 |
| ADC | — | 2x 12-bit, up to 16 channels, 1 MSPS |
| Timers | — | 7x 16-bit + 1x PWM (motor control) |
| Communication | — | USB FS, 2x CAN 2.0B, 3x USART, 2x UART, 3x SPI, 2x I2S, 2x I2C, SDIO, FSMC |
| Debug Interface | — | JTAG + SWD + ETM |