TAS5342LDDV vs TAS5342DDVR तुलना
विस्तृत दोनों ओर की तुलना TAS5342LDDV द्वारा Texas Instruments और TAS5342DDVR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ सक्रियविशेषता तुलना
| पैरामीटर | TAS5342LDDV | TAS5342DDVR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Stereo digital amplifier power stage | Stereo digital amplifier power stage |
| Amplifier Class | Class D | Class D |
| Channel Configuration | 1 channel mono or 2 channels stereo | 1-channel mono or 2-channel stereo |
| Maximum Output Power | 100 W per channel into 4 ohm BTL | 100 W per channel |
| Total Output Power | 200 W | — |
| Recommended Load Impedance | 4 ohm bridge-tied load | — |
| पैकेज | 44-pin HTSSOP | 44-HTSSOP |
| Package Width | 6.20 mm | — |
| माउंटिंग प्रकार | Surface mount | — |
| Integrated Protection | On-chip protection system | — |
| Harmonic Distortion | [DATA_NEEDED: harmonic distortion specification] | [DATA_NEEDED: harmonic distortion specification] |
| Integrated Noise | [DATA_NEEDED: integrated noise specification] | [DATA_NEEDED: integrated noise specification] |
| Idle Current | [DATA_NEEDED: idle current specification] | [DATA_NEEDED: idle current specification] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 0 V to 34 V |
| ऑपरेटिंग तापमान रेंज | Commercial grade; [DATA_NEEDED: minimum and maximum values] | 0 C to 70 C |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Speaker Output Configuration | — | Bridge-tied load (BTL) |
| Typical Dual Supply Voltage | — | 10.8 V to 13.2 V |
| Maximum Load Resistance | — | 8 ohm |
| Input Signal | — | Differential input |
| Output Signal | — | Differential output |
| Maximum Power Dissipation | — | 2000 mW typical |
| Protection Features | — | Integrated protection system for multiple fault conditions |