TAS5342LDDV vs TAS5342DDVR 비교
다음의 상세 나란히 비교: TAS5342LDDV 제조: Texas Instruments 및 TAS5342DDVR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ 활성사양 비교
| 파라미터 | TAS5342LDDV | TAS5342DDVR |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Stereo digital amplifier power stage | Stereo digital amplifier power stage |
| Amplifier Class | Class D | Class D |
| Channel Configuration | 1 channel mono or 2 channels stereo | 1-channel mono or 2-channel stereo |
| Maximum Output Power | 100 W per channel into 4 ohm BTL | 100 W per channel |
| Total Output Power | 200 W | — |
| Recommended Load Impedance | 4 ohm bridge-tied load | — |
| 패키지 | 44-pin HTSSOP | 44-HTSSOP |
| Package Width | 6.20 mm | — |
| 실장 유형 | Surface mount | — |
| Integrated Protection | On-chip protection system | — |
| Harmonic Distortion | [DATA_NEEDED: harmonic distortion specification] | [DATA_NEEDED: harmonic distortion specification] |
| Integrated Noise | [DATA_NEEDED: integrated noise specification] | [DATA_NEEDED: integrated noise specification] |
| Idle Current | [DATA_NEEDED: idle current specification] | [DATA_NEEDED: idle current specification] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 0 V to 34 V |
| 동작 온도 범위 | Commercial grade; [DATA_NEEDED: minimum and maximum values] | 0 C to 70 C |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Speaker Output Configuration | — | Bridge-tied load (BTL) |
| Typical Dual Supply Voltage | — | 10.8 V to 13.2 V |
| Maximum Load Resistance | — | 8 ohm |
| Input Signal | — | Differential input |
| Output Signal | — | Differential output |
| Maximum Power Dissipation | — | 2000 mW typical |
| Protection Features | — | Integrated protection system for multiple fault conditions |