THS6182DWR vs THS6182DR तुलना

विस्तृत दोनों ओर की तुलना THS6182DWR द्वारा Texas Instruments और THS6182DR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
THS6182DWR THS6182DWR - Low-Power ADSL/PLC Line Driver | Texas Instruments (Tape & Reel)

THS6182DWR - Low-Power ADSL/PLC Line Driver | Texas Instruments (Tape & Reel)

THS6182DWR ✓ सक्रिय
Texas Instruments
THS6182DR THS6182DR - Low-Power ADSL/PLC Differential Driver | TI (Tape & Reel)

THS6182DR - Low-Power ADSL/PLC Differential Driver | TI (Tape & Reel)

THS6182DR ✓ सक्रिय

विशेषता तुलना

पैरामीटर THS6182DWR THS6182DR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Low-power differential ADSL/PLC line driver Low-power ADSL and PLC differential line driver
Architecture Current-feedback differential line driver —
Logic Type 1/0 DSL driver —
Functions 2 driver functions —
Receivers 2 bits —
पैकेज 20-pin SOIC 16-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज -40°C to +85°C —
Full-Bias Mode Current 11 mA/channel —
Mid-Bias Mode Current 7.5 mA/channel —
Low-Bias Mode Current 4 mA/channel —
Shutdown Mode Current 0.25 mA/channel —
Minimum Stable Operating Current 1.8 mA/channel —
Inverting Current Noise 3.2 nV/√Hz 3.2 nV/√Hz
Bias Control User-controlled through IADJ pin —
Power Control Modes Full bias, mid bias, low bias, and shutdown —
Target Application Full-rate ADSL and PLC systems —
Pin Compatibility Pin compatible with EL1503C and EL1508C —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Architecture — Current-feedback differential driver
Logic Polarity — 1/0 driver
Number of Channels — 2 channels
Full-Bias Supply Current — 11 mA per channel
Mid-Bias Supply Current — 7.5 mA per channel
Low-Bias Supply Current — 4 mA per channel
Shutdown Supply Current — 0.25 mA per channel
Minimum Stable Channel Current — 1.8 mA per channel
Differential Output Swing — 44 Vpp
Maximum Power Output — +20 dBm
Third-Harmonic Distortion at +20 dBm — -74 dBc with low-bias setting
Low-Distortion Performance — -88 dBc from 100 kHz to 1 MHz
Bias Adjustment — IADJ pin for user-controlled bias current
Compatible Driver Families — Pin compatible with EL1503C and EL1508C

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध