THS6182DWR vs THS6182DR So sánh
So sánh chi tiết song song của THS6182DWR bằng Texas Instruments và THS6182DR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
THS6182DWR - Low-Power ADSL/PLC Line Driver | Texas Instruments (Tape & Reel)
THS6182DWR ✓ Hoạt độngTexas Instruments
THS6182DR - Low-Power ADSL/PLC Differential Driver | TI (Tape & Reel)
THS6182DR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | THS6182DWR | THS6182DR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Low-power differential ADSL/PLC line driver | Low-power ADSL and PLC differential line driver |
| Architecture | Current-feedback differential line driver | — |
| Logic Type | 1/0 DSL driver | — |
| Functions | 2 driver functions | — |
| Receivers | 2 bits | — |
| Hộp | 20-pin SOIC | 16-pin SOIC |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C | — |
| Full-Bias Mode Current | 11 mA/channel | — |
| Mid-Bias Mode Current | 7.5 mA/channel | — |
| Low-Bias Mode Current | 4 mA/channel | — |
| Shutdown Mode Current | 0.25 mA/channel | — |
| Minimum Stable Operating Current | 1.8 mA/channel | — |
| Inverting Current Noise | 3.2 nV/√Hz | 3.2 nV/√Hz |
| Bias Control | User-controlled through IADJ pin | — |
| Power Control Modes | Full bias, mid bias, low bias, and shutdown | — |
| Target Application | Full-rate ADSL and PLC systems | — |
| Pin Compatibility | Pin compatible with EL1503C and EL1508C | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Architecture | — | Current-feedback differential driver |
| Logic Polarity | — | 1/0 driver |
| Number of Channels | — | 2 channels |
| Full-Bias Supply Current | — | 11 mA per channel |
| Mid-Bias Supply Current | — | 7.5 mA per channel |
| Low-Bias Supply Current | — | 4 mA per channel |
| Shutdown Supply Current | — | 0.25 mA per channel |
| Minimum Stable Channel Current | — | 1.8 mA per channel |
| Differential Output Swing | — | 44 Vpp |
| Maximum Power Output | — | +20 dBm |
| Third-Harmonic Distortion at +20 dBm | — | -74 dBc with low-bias setting |
| Low-Distortion Performance | — | -88 dBc from 100 kHz to 1 MHz |
| Bias Adjustment | — | IADJ pin for user-controlled bias current |
| Compatible Driver Families | — | Pin compatible with EL1503C and EL1508C |