TJA1044VTZ vs TJA1044VTKZ तुलना

विस्तृत दोनों ओर की तुलना TJA1044VTZ द्वारा NXP Semiconductors और TJA1044VTKZ द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
TJA1044VTZ TJA1044VTZ - 5Mbps CAN Transceiver | NXP | Automotive

TJA1044VTZ - 5Mbps CAN Transceiver | NXP | Automotive

TJA1044VTZ ✓ सक्रिय
NXP Semiconductors
TJA1044VTKZ TJA1044VTKZ - 1Mbit/s CAN Transceiver with Standby | NXP

TJA1044VTKZ - 1Mbit/s CAN Transceiver with Standby | NXP

TJA1044VTKZ ✓ सक्रिय

विशेषता तुलना

पैरामीटर TJA1044VTZ TJA1044VTKZ
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type High-speed CAN transceiver with standby mode —
Protocol Controller Area Network (CAN) —
Transmitter and Receiver Count 1 transmitter / 1 receiver —
Duplex Mode Half duplex —
Maximum Data Rate 5 Mbps 1 Mbit/s
Operating Modes Normal and standby —
Supply Voltage Range 4.75 V to 5.25 V —
Receiver Hysteresis 300 mV —
Junction Temperature Range -40°C to 150°C —
पैकेज 8-pin SOIC 8-HVSON (3x3 mm) with exposed pad
Package Family SOIC surface-mount family —
माउंटिंग प्रकार Surface mount Surface Mount
Automotive Qualification AEC-Q100 —
Product Status Active —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance statement]
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Transmitter Propagation Delay [DATA_NEEDED: transmitter propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
CANH and CANL Bus Pins [DATA_NEEDED: CANH and CANL bus-pin details] —
Device Type — High-speed CAN transceiver with standby mode
Transceiver Type — Half (1/1) CAN transceiver
Supply Voltage VCC — 5 V nominal (CAN transceiver supply)
Logic Supply VIO — 3.3 V compatible (separate VIO pin)
Bus Lines — CANH, CANL differential two-wire bus
Interface Signals — TXD (input), RXD (output), S (standby control)
Standby Mode — Yes, controlled via S pin
Package Type — 8-VDFN / HVSON with exposed thermal pad
MSL स्तर — 1 (unlimited floor life)
Peak Reflow Temperature — 260 °C
Qualification — VeLIO Certified
Product Family — Mantis high-speed CAN transceiver family
Target Segment — Automotive and industrial high-speed CAN networks
Number of Bus Nodes Supported — [DATA_NEEDED: maximum nodes per bus segment]
Bus Common-Mode Range — [DATA_NEEDED: bus common-mode voltage range]
Loopback Delay — [DATA_NEEDED: TXD to RXD propagation delay]
ESD Protection — [DATA_NEEDED: IEC 61000-4-2 ESD rating per pin]
ऑपरेटिंग तापमान — [DATA_NEEDED: junction/ambient operating temperature range]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध