TJA1044VTZ vs TJA1044VTKZ So sánh
So sánh chi tiết song song của TJA1044VTZ bằng NXP Semiconductors và TJA1044VTKZ bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | TJA1044VTZ | TJA1044VTKZ |
|---|---|---|
| Thương hiệu | NXP Semiconductors | NXP Semiconductors |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | High-speed CAN transceiver with standby mode | — |
| Protocol | Controller Area Network (CAN) | — |
| Transmitter and Receiver Count | 1 transmitter / 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 5 Mbps | 1 Mbit/s |
| Operating Modes | Normal and standby | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Receiver Hysteresis | 300 mV | — |
| Junction Temperature Range | -40°C to 150°C | — |
| Hộp | 8-pin SOIC | 8-HVSON (3x3 mm) with exposed pad |
| Package Family | SOIC surface-mount family | — |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Product Status | Active | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Transmitter Propagation Delay | [DATA_NEEDED: transmitter propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| CANH and CANL Bus Pins | [DATA_NEEDED: CANH and CANL bus-pin details] | — |
| Device Type | — | High-speed CAN transceiver with standby mode |
| Transceiver Type | — | Half (1/1) CAN transceiver |
| Supply Voltage VCC | — | 5 V nominal (CAN transceiver supply) |
| Logic Supply VIO | — | 3.3 V compatible (separate VIO pin) |
| Bus Lines | — | CANH, CANL differential two-wire bus |
| Interface Signals | — | TXD (input), RXD (output), S (standby control) |
| Standby Mode | — | Yes, controlled via S pin |
| Package Type | — | 8-VDFN / HVSON with exposed thermal pad |
| Cấp MSL | — | 1 (unlimited floor life) |
| Peak Reflow Temperature | — | 260 °C |
| Qualification | — | VeLIO Certified |
| Product Family | — | Mantis high-speed CAN transceiver family |
| Target Segment | — | Automotive and industrial high-speed CAN networks |
| Number of Bus Nodes Supported | — | [DATA_NEEDED: maximum nodes per bus segment] |
| Bus Common-Mode Range | — | [DATA_NEEDED: bus common-mode voltage range] |
| Loopback Delay | — | [DATA_NEEDED: TXD to RXD propagation delay] |
| ESD Protection | — | [DATA_NEEDED: IEC 61000-4-2 ESD rating per pin] |
| Nhiệt độ hoạt động | — | [DATA_NEEDED: junction/ambient operating temperature range] |