TL431QDBZR vs TL431BQDBZR तुलना
विस्तृत दोनों ओर की तुलना TL431QDBZR द्वारा Texas Instruments और TL431BQDBZR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | TL431QDBZR | TL431BQDBZR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Voltage Regulators | Voltage Regulators |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Adjustable Precision Shunt Voltage Reference | — |
| Reference Voltage (Vref) | 2.495 V | 2.495 V |
| Output Tolerance | ±2.2% (Q grade, 25C) | — |
| Adjustable Output Range | Vref (2.495 V) to 36 V | — |
| Maximum Cathode Current | 100 mA | 100 mA |
| Maximum Cathode Voltage | 36 V | — |
| Minimum Cathode Current for Regulation | 1 mA (typical) | 1 mA (typical) |
| Dynamic Output Impedance | 0.22 ohm (typical) | — |
| ऑपरेटिंग तापमान रेंज | -40C to +125C (Q grade) | — |
| पैकेज | SOT-23-3 (DBZ, TO-236AB) | SOT-23 (DBZ), 3-pin |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Package Dimensions | 2.9 mm x 1.3 mm x 1 mm body | — |
| Terminal Pitch | 1.9 mm | — |
| Reference Input Current | [DATA_NEEDED: Reference input current] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| Temperature Stability | [DATA_NEEDED: Temperature drift] | — |
| Reference Voltage Tolerance | — | ±0.5% (B grade, at 25 C) |
| Adjustable Output Voltage Range | — | 2.495 V to 36 V |
| Device Type | — | Adjustable Precision Shunt Regulator / Shunt Voltage Reference |
| Temperature Grade | — | Q grade, -40 C to +125 C |
| Typical Output Noise | — | 0.2 uVrms (per TI adjustable precision shunt regulator datasheet) |
| Minimum Output Capacitance Stability | — | [DATA_NEEDED: stable output capacitance range] |
| Automotive Qualification | — | Yes (Q grade; TL431BQDBZRQ1 variant available) |
| पिन की संख्या | — | 3 |
| Packaging | — | Tape & Reel (T/R) |
| Family Alternatives (grades) | — | B = 0.5%, A = 1%, standard = 2% initial tolerance |