TL431QDBZR vs TL431BQDBZR Perbandingan
Perbandingan bersamaan detil TL431QDBZR dari Texas Instruments dan TL431BQDBZR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TL431QDBZR | TL431BQDBZR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Voltage Regulators | Voltage Regulators |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Adjustable Precision Shunt Voltage Reference | — |
| Reference Voltage (Vref) | 2.495 V | 2.495 V |
| Output Tolerance | ±2.2% (Q grade, 25C) | — |
| Adjustable Output Range | Vref (2.495 V) to 36 V | — |
| Maximum Cathode Current | 100 mA | 100 mA |
| Maximum Cathode Voltage | 36 V | — |
| Minimum Cathode Current for Regulation | 1 mA (typical) | 1 mA (typical) |
| Dynamic Output Impedance | 0.22 ohm (typical) | — |
| Rentang Suhu Kerja | -40C to +125C (Q grade) | — |
| Paket | SOT-23-3 (DBZ, TO-236AB) | SOT-23 (DBZ), 3-pin |
| Tipe Mounting | Surface Mount | Surface Mount |
| Package Dimensions | 2.9 mm x 1.3 mm x 1 mm body | — |
| Terminal Pitch | 1.9 mm | — |
| Reference Input Current | [DATA_NEEDED: Reference input current] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Temperature Stability | [DATA_NEEDED: Temperature drift] | — |
| Reference Voltage Tolerance | — | ±0.5% (B grade, at 25 C) |
| Adjustable Output Voltage Range | — | 2.495 V to 36 V |
| Device Type | — | Adjustable Precision Shunt Regulator / Shunt Voltage Reference |
| Temperature Grade | — | Q grade, -40 C to +125 C |
| Typical Output Noise | — | 0.2 uVrms (per TI adjustable precision shunt regulator datasheet) |
| Minimum Output Capacitance Stability | — | [DATA_NEEDED: stable output capacitance range] |
| Automotive Qualification | — | Yes (Q grade; TL431BQDBZRQ1 variant available) |
| Jumlah Pin | — | 3 |
| Packaging | — | Tape & Reel (T/R) |
| Family Alternatives (grades) | — | B = 0.5%, A = 1%, standard = 2% initial tolerance |