UCC21530DWKR vs SI8273AB-IM तुलना
विस्तृत दोनों ओर की तुलना UCC21530DWKR द्वारा Texas Instruments और SI8273AB-IM द्वारा Skyworks Solutions. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | UCC21530DWKR | SI8273AB-IM |
|---|---|---|
| ब्रांड | Texas Instruments | Skyworks Solutions |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Driver Configuration | Half-Bridge (dual independent outputs) | — |
| Number of Channels | 2 | 2 (High-Side / Low-Side) |
| Peak Source Current | 4 A | — |
| Peak Sink Current | 6 A | — |
| Isolation Voltage (RMS) | 5.7 kVRMS (reinforced, per UL 1577) | — |
| Common-Mode Transient Immunity (CMTI) | >=125 V/ns (minimum) | Industry-leading (per datasheet) |
| Channel-to-Channel Spacing | 3.3 mm | — |
| Maximum Switching Frequency | 5 MHz | — |
| VDD Supply Range (logic side) | 3 V to 5.5 V | — |
| VDDA / VDDB Range (drive side) | 8 V to 18 V (up to 25 V per TI part details) | — |
| Propagation Delay | [DATA_NEEDED: propagation delay in ns] | 60 ns (typical) |
| Dead-Time Control | Programmable via DT pin resistor | — |
| इनेबल पिन | Yes (EN, active-high; pulls LOW to disable both outputs) | — |
| Input Logic Compatibility | CMOS / TTL | — |
| ऑपरेटिंग तापमान रेंज | -40C to +125C | -40C to +125C |
| पैकेज | 14-SOIC (DWK) with 3.3 mm channel spacing | 14-pin LGA (5x5 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Approximate Datasheet Length | 47 pages (per third-party datasheet archive) | — |
| RoHS स्थिति | Compliant | Compliant |
| Product Type | — | Isolated Gate Driver (ISOdriver) |
| Isolation Technology | — | Silicon RF capacitive isolation |
| Isolation Withstand Voltage | — | 2500 Vrms (per UL1577) |
| Peak Output Current | — | 4 A source/sink |
| Input Configuration | — | Single PWM or dual digital inputs (VIA, VIB) |
| Input Supply Voltage (VDD) | — | 2.5 V to 5.5 V |
| UVLO Threshold | — | 3 V (programmable on some variants) |
| आउटपुट कॉन्फ़िगरेशन | — | Independent HS and LS drivers |