UCC21750DW vs UCC21750-Q1 तुलना
विस्तृत दोनों ओर की तुलना UCC21750DW द्वारा Texas Instruments और UCC21750-Q1 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
UCC21750-Q1 - 10A Isolated SiC/IGBT Gate Driver | TI Automotive
UCC21750-Q1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | UCC21750DW | UCC21750-Q1 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Single-channel isolated gate driver | — |
| Target Technology | SiC MOSFET / IGBT | — |
| Peak Output Current (Source/Sink) | ±10 A | — |
| Isolation Voltage (RMS) | 5.7 kVrms | — |
| Isolation Type | Capacitive coupling (reinforced) | — |
| Common-Mode Transient Immunity (CMTI) | [DATA_NEEDED: CMTI minimum V/ns] | — |
| Maximum DC-Link Operating Voltage | 2121 V | — |
| Number of Channels | 1 | — |
| पैकेज | SOIC-16 (DW) wide-body | 16-pin SOIC (DW) wide-body, 8.0 mm creepage/clearance |
| पिन काउंट | 16 | — |
| Propagation Delay | [DATA_NEEDED: tPD typical/max ns] | [DATA_NEEDED: typical tpHL / tpLH] |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | -40C to +125C (automotive) |
| DESAT Short-Circuit Protection | Yes (programmable threshold) | — |
| Internal Miller Clamp | Yes | — |
| Isolated Analog Sensing Output | Yes | — |
| UVLO (Primary + Secondary) | Yes | — |
| Soft Turn-Off on Fault | Yes | — |
| RoHS स्थिति | Compliant | Compliant |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL rating] | — |
| Driver Type | — | Single-channel isolated gate driver |
| Isolation Technology | — | SiO2 capacitive (galvanic isolation) |
| Isolation Rating (Reinforced) | — | 5.7 kVrms |
| Maximum DC Operating Voltage | — | 2121 V DC |
| Peak Source Current | — | +10 A |
| Peak Sink Current | — | -10 A |
| Supported Switch Types | — | SiC MOSFET, IGBT |
| Output-side Supply Voltage | — | [DATA_NEEDED: VCC range] |
| Input-side Supply Voltage (VDD) | — | [DATA_NEEDED: VDD range] |
| CMTI (Common-Mode Transient Immunity) | — | >100 V/ns (typical) |
| Protection Features | — | DESAT overcurrent/short-circuit, active Miller clamp, UVLO (input + output), fault report |
| Isolated Analog-to-PWM Sensor | — | Yes (temperature or voltage sensing) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |