UCC21750DW vs UCC21750-Q1 比較

詳細並排比較 UCC21750DW 由 Texas Instruments 與 UCC21750-Q1 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
UCC21750DW UCC21750DW - ±10A 5.7kVrms Isolated SiC/IGBT Gate Driver | TI

UCC21750DW - ±10A 5.7kVrms Isolated SiC/IGBT Gate Driver | TI

UCC21750DW ✓ 啟用中
Texas Instruments
UCC21750-Q1 UCC21750-Q1 - 10A Isolated SiC/IGBT Gate Driver | TI Automotive

UCC21750-Q1 - 10A Isolated SiC/IGBT Gate Driver | TI Automotive

UCC21750-Q1 ✓ 啟用中

規格比較

參數 UCC21750DW UCC21750-Q1
品牌 Texas Instruments Texas Instruments
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Product Type Single-channel isolated gate driver —
Target Technology SiC MOSFET / IGBT —
Peak Output Current (Source/Sink) ±10 A —
Isolation Voltage (RMS) 5.7 kVrms —
Isolation Type Capacitive coupling (reinforced) —
Common-Mode Transient Immunity (CMTI) [DATA_NEEDED: CMTI minimum V/ns] —
Maximum DC-Link Operating Voltage 2121 V —
Number of Channels 1 —
封裝 SOIC-16 (DW) wide-body 16-pin SOIC (DW) wide-body, 8.0 mm creepage/clearance
腳位數 16 —
Propagation Delay [DATA_NEEDED: tPD typical/max ns] [DATA_NEEDED: typical tpHL / tpLH]
工作溫度範圍 -40 °C to +125 °C -40C to +125C (automotive)
DESAT Short-Circuit Protection Yes (programmable threshold) —
Internal Miller Clamp Yes —
Isolated Analog Sensing Output Yes —
UVLO (Primary + Secondary) Yes —
Soft Turn-Off on Fault Yes —
RoHS 狀態 Compliant Compliant
安裝類型 Surface Mount Surface Mount
MSL 等級 [DATA_NEEDED: MSL rating] —
Driver Type — Single-channel isolated gate driver
Isolation Technology — SiO2 capacitive (galvanic isolation)
Isolation Rating (Reinforced) — 5.7 kVrms
Maximum DC Operating Voltage — 2121 V DC
Peak Source Current — +10 A
Peak Sink Current — -10 A
Supported Switch Types — SiC MOSFET, IGBT
Output-side Supply Voltage — [DATA_NEEDED: VCC range]
Input-side Supply Voltage (VDD) — [DATA_NEEDED: VDD range]
CMTI (Common-Mode Transient Immunity) — >100 V/ns (typical)
Protection Features — DESAT overcurrent/short-circuit, active Miller clamp, UVLO (input + output), fault report
Isolated Analog-to-PWM Sensor — Yes (temperature or voltage sensing)
AEC-Q100 Qualification — Qualified (automotive grade)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價