VNI4140K-32 vs VNQ500PEP-E तुलना

विस्तृत दोनों ओर की तुलना VNI4140K-32 द्वारा STMicroelectronics और VNQ500PEP-E द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

STMicroelectronics
VNI4140K-32 VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics

VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics

VNI4140K-32 ✓ सक्रिय
STMicroelectronics
VNQ500PEP-E VNQ500PEP-E - Quad Channel 500mA High-Side Driver | STMicroelectronics

VNQ500PEP-E - Quad Channel 500mA High-Side Driver | STMicroelectronics

VNQ500PEP-E ✓ सक्रिय

विशेषता तुलना

पैरामीटर VNI4140K-32 VNQ500PEP-E
ब्रांड STMicroelectronics STMicroelectronics
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Quad high-side smart power solid-state relay —
Number of Channels 4 4
टोपोलॉजी High-side switch (N-channel MOSFET) —
Load Current per Channel 1.0 A (continuous) —
On-State Resistance (RDS(on)) 0.08 ohm per channel —
Supply Voltage (VCC) Max 41 V —
आउटपुट कॉन्फ़िगरेशन 1:1 N-Channel —
आउटपुट की संख्या 4 —
Diagnostics Per-channel open-load, short-to-ground, thermal fault —
Inductive Load Handling Fast demagnetization (integrated) —
Logic Input Compatibility CMOS/TTL compatible logic inputs —
पैकेज PowerSSO-24 (24-pin with exposed thermal pad) PowerSSO-12 (PowerSO-12) with exposed pad
Package Width 7.50 mm (approximately 0.295 inch) —
माउंटिंग प्रकार Surface Mount Surface Mount
Industrial Standard Compliance IEC 61131-2 —
ESD Rating 25 kV (per IEC standard, air discharge) —
Technology ST VIPower (vertical DMOS + CMOS/bipolar control) VIPower M0-3
फ़ंक्शन — Quad channel high-side driver
Configuration — High-side, non-inverting
Per-Channel Output Current — 500 mA continuous
Current Limit (per channel) — [DATA_NEEDED: typical current limit value]
On-Resistance RDS(on) — [DATA_NEEDED: per-channel RDS(on) in mOhm]
Supply Voltage Range (Vs) — 4.5 V to 36 V
Load-Dump Transient Tolerance — Up to 36 V (automotive rated)
Input Compatibility — CMOS-compatible logic inputs
Chip Enable — Yes, common enable for all 4 channels
Protection Features — Current limit, shorted load, overtemperature, undervoltage shutdown, loss of ground
Diagnostic Output — Status / fault feedback
Standby Current — Very low standby current
ऑपरेटिंग तापमान — [DATA_NEEDED: junction temperature range]
RoHS स्थिति — Compliant
Lead-Free — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध