VNQ500PEP-E vs VNI4140K-32 तुलना

विस्तृत दोनों ओर की तुलना VNQ500PEP-E द्वारा STMicroelectronics और VNI4140K-32 द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

STMicroelectronics
VNQ500PEP-E VNQ500PEP-E - Quad Channel 500mA High-Side Driver | STMicroelectronics

VNQ500PEP-E - Quad Channel 500mA High-Side Driver | STMicroelectronics

VNQ500PEP-E ✓ सक्रिय
STMicroelectronics
VNI4140K-32 VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics

VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics

VNI4140K-32 ✓ सक्रिय

विशेषता तुलना

पैरामीटर VNQ500PEP-E VNI4140K-32
ब्रांड STMicroelectronics STMicroelectronics
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Quad channel high-side driver —
Technology VIPower M0-3 ST VIPower (vertical DMOS + CMOS/bipolar control)
Number of Channels 4 4
Configuration High-side, non-inverting —
Per-Channel Output Current 500 mA continuous —
Current Limit (per channel) [DATA_NEEDED: typical current limit value] —
On-Resistance RDS(on) [DATA_NEEDED: per-channel RDS(on) in mOhm] —
Supply Voltage Range (Vs) 4.5 V to 36 V —
Load-Dump Transient Tolerance Up to 36 V (automotive rated) —
Input Compatibility CMOS-compatible logic inputs —
Chip Enable Yes, common enable for all 4 channels —
Protection Features Current limit, shorted load, overtemperature, undervoltage shutdown, loss of ground —
Diagnostic Output Status / fault feedback —
Standby Current Very low standby current —
पैकेज PowerSSO-12 (PowerSO-12) with exposed pad PowerSSO-24 (24-pin with exposed thermal pad)
ऑपरेटिंग तापमान [DATA_NEEDED: junction temperature range] —
माउंटिंग प्रकार Surface Mount Surface Mount
RoHS स्थिति Compliant —
Lead-Free Yes —
Device Type — Quad high-side smart power solid-state relay
टोपोलॉजी — High-side switch (N-channel MOSFET)
Load Current per Channel — 1.0 A (continuous)
On-State Resistance (RDS(on)) — 0.08 ohm per channel
Supply Voltage (VCC) Max — 41 V
आउटपुट कॉन्फ़िगरेशन — 1:1 N-Channel
आउटपुट की संख्या — 4
Diagnostics — Per-channel open-load, short-to-ground, thermal fault
Inductive Load Handling — Fast demagnetization (integrated)
Logic Input Compatibility — CMOS/TTL compatible logic inputs
Package Width — 7.50 mm (approximately 0.295 inch)
Industrial Standard Compliance — IEC 61131-2
ESD Rating — 25 kV (per IEC standard, air discharge)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध