AD518JH/+ - 12 MHz Low-Offset Op Amp | Analog Devices
MPN: AD518JH/+ ✓ सक्रियAD518JH/+ अवलोकन
An operational amplifier is an active analog component that amplifies the difference between two input voltages. Within the broader semiconductor hierarchy, the AD518JH/+ belongs to the operational-amplifier category, which is part of amplifier ICs and analog signal-conditioning systems. Its primary roles include signal gain, impedance buffering, analog summation, and active filtering. The hermetic metal-can package distinguishes it from common plastic or surface-mount operational-amplifier packages.
The AD518JH/+ offers a 12 MHz gain-bandwidth product, which supports higher-frequency closed-loop operation than low-frequency general-purpose amplifiers. Its 70 V/us slew rate defines how rapidly the output can move through large voltage changes, while the 120 nA input bias current limits the disturbance introduced into high-impedance signal sources. The listed 15 mV maximum input offset voltage is material in precision DC applications and should be included in error budgets.
Operationally, the AD518JH/+ is a general-purpose voltage-feedback amplifier whose performance depends on feedback topology, source impedance, load, supply voltage, and compensation. A 12 MHz gain-bandwidth product does not mean every closed-loop circuit has 12 MHz bandwidth; practical bandwidth also depends on the selected noise gain and stability margin. Likewise, slew-rate and offset limitations should be considered when processing large-amplitude or low-level signals.
Typical uses include industrial instrumentation, low-level signal conditioning, analog measurement chains, sensor amplification, active filtering, and educational or laboratory analog circuits. The TO-99 package can also be advantageous where a through-hole mechanical format and hermetic construction are preferred over compact surface-mount assembly. Board layout still requires short feedback paths and careful grounding to avoid parasitic oscillation.
For a new design, verify the complete pin assignment and operating conditions in the Analog Devices datasheet before laying out the PCB. Keep input and feedback traces short, connect the unused input to a defined reference potential when appropriate, and check output swing and stability against the intended supply rails. The available part information does not establish whether every legacy function can be reproduced by a modern amplifier without schematic changes.
This page consolidates the confirmed AD518JH/+ electrical characteristics, package information, sourcing workflow, and practical design considerations. It also distinguishes exact-fit replacement evidence from broader functional alternatives, helping engineers assess board compatibility, offset performance, bandwidth, slew rate, and supply requirements before approving a substitution.
के लिए ड्रॉप-इन विकल्प AD518JH/+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंAD518JH/+ Maximum Ratings और Electrical Characteristics
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 1 circuit |
| Gain-Bandwidth Product | 12 MHz |
| Slew Rate | 70 V/us |
| Input Offset Voltage | 15 mV maximum |
| Input Bias Current | 120 nA |
| पैकेज | 8-pin TO-99 hermetic metal can |
| पिन काउंट | 8 pins |
| माउंटिंग प्रकार | Through-hole |
| Manufacturer | Analog Devices |
AD518JH/+ 8-pin to-99 hermetic metal can पिन कॉन्फ़िगरेशन गाइड
AD518JH/+ (8-pin to-99 hermetic metal can पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD518JH/+.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AD518JH/+ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Instrumentation, Sensor Signal Conditioning, Active Analog Filtering, Precision Measurement, Test and Measurement Equipment, Educational and Laboratory Circuits.
Industrial Instrumentation
The AD518JH/+ fits legacy industrial instrumentation circuits that require a single general-purpose amplifier in an 8-pin TO-99 package. Its 12 MHz gain-bandwidth product provides useful closed-loop bandwidth when the selected noise gain is modest, while the 70 V/us slew rate allows comparatively rapid output transitions. The 15 mV maximum offset must be included in the measurement uncertainty for low-level sensor signals, and the 120 nA input bias current should be checked against the sensor output impedance. In a redesigned industrial measurement chain, engineers should compare the original AD518JH/+ characteristics with the selected modern amplifier before changing the schematic.
Sensor Signal Conditioning
AD518JH/+ can amplify weak sensor outputs in laboratory and process-control front ends when the circuit requires the original TO-99 footprint. The 120 nA input bias current limits input-loading error in high-impedance sources, while the 15 mV maximum offset sets a floor for uncalibrated DC accuracy. Its 12 MHz gain-bandwidth product and 70 V/us slew rate provide ample speed for many sensor systems operating below their bandwidth limits. Practical implementation still requires checking input bias voltage, common-mode range, output swing, and stability. Where calibration can compensate static offset and sensor impedance is moderate, the amplifier's legacy package can remain advantageous for maintaining an established board design.
Active Analog Filtering
The AD518JH/+ is suitable for active-filter stages in analog test equipment and laboratory electronics because its 12 MHz gain-bandwidth product and 70 V/us slew rate support many moderate-frequency filter designs. The amplifier can be configured for inverting, non-inverting, or summing functions, although the feedback components determine the actual response and stability. With a 15 mV maximum input offset, low-frequency or high-gain stages may require calibration to reduce DC error. Engineers should verify the complete datasheet before finalizing component values, particularly the maximum output swing and gain-bandwidth interaction. The hermetic TO-99 package also provides a practical option where through-hole assembly is preferred.
Precision Measurement
AD518JH/+ may be used in precision measurement modules that depend on its established 8-pin TO-99 implementation. The 12 MHz gain-bandwidth product permits amplification over a broad signal range, but the 15 mV maximum input offset voltage is important when signals approach millivolt levels. A calibration stage can reduce fixed offset, while the 120 nA input bias current becomes significant with high source resistance. Design work should also account for bias-current compensation and the 70 V/us slew rate during signal acquisition. For a new measurement platform, compare these parameters against the actual sensor, converter, excitation source, and required settling interval rather than selecting the amplifier solely by bandwidth.
Test and Measurement Equipment
The AD518JH/+ is appropriate for repair and extension of legacy test and measurement equipment that uses an 8-pin TO-99 general-purpose amplifier. Its 12 MHz gain-bandwidth product supports buffer, gain, and summing stages, and the 70 V/us slew rate is beneficial when the output must traverse a significant voltage range quickly. The 15 mV maximum offset should be considered in low-level measurement paths, while the 120 nA input bias current affects very high-impedance sources. When modernizing such equipment, verify pin functions, supply polarity, bypass requirements, and stability at the intended noise gain. Retaining the AD518JH/+ can minimize mechanical and schematic disruption when its original electrical performance remains suitable.
Educational and Laboratory Circuits
AD518JH/+ is well suited to educational and laboratory amplifier experiments because its 8-pin TO-99 package exposes a conventional through-hole implementation and its key characteristics are straightforward to compare: 12 MHz gain-bandwidth product, 70 V/us slew rate, 15 mV maximum offset, and 120 nA input bias current. Students can analyze offset error, slew-limited large-signal behavior, closed-loop bandwidth, and bias-current effects using standard resistor networks. The package also makes breadboard or perforated-board prototyping practical compared with fine-pitch surface-mount devices. Before applying it to a sensitive measurement, check the supply and common-mode requirements from the manufacturer datasheet and include component tolerances and parasitic capacitance in the expected filter response.
के लिए इंजीनियरिंग संदर्भ डेटा AD518JH/+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | Analog Devices |
| Package | 8-pin TO-99 hermetic metal can |
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 1 circuit |
| Gain-Bandwidth Product | 12 MHz |
| Slew Rate | 70 V/us |
| Input Offset Voltage | 15 mV maximum |
| Input Bias Current | 120 nA |
| Mounting Type | Through-hole |
मुख्य विशेषताएँ
- 12 MHz gain-bandwidth product for legacy analog signal paths (बनामNo verified drop-in alternative)
- Established 8-pin hermetic TO-99 mechanical format (बनामNo verified drop-in alternative)
- Defined input bias and offset characteristics (बनामNo verified drop-in alternative)
डिज़ाइन नोट्स
Route the output back to the inverting-input node through the shortest practical feedback path. Keep the non-inverting input and feedback components away from high-current switching nodes, and place power-bypass capacitors close to the device pins. Because the AD518JH/+ uses an 8-pin TO-99 package, preserve the manufacturer's pin numbering and package orientation exactly; the physical drawing and schematic symbols should be cross-checked before fabrication.
Do not treat the 12 MHz gain-bandwidth product as the closed-loop bandwidth of every circuit. Actual bandwidth depends on the selected closed-loop gain and the amplifier's stability behavior. The 15 mV maximum input offset also means that low-level DC measurements can require trimming or calibration. Confirm the supply range, input common-mode range, output swing, and bias requirements in the manufacturer datasheet before energizing the circuit.
For high-impedance sources, account for the 120 nA input bias current before adding input capacitance. The resulting bias-current error can be reduced with a compensating resistor whose value approximates the source resistance, but its noise and tolerance must be included in the design. At high frequency, minimize breadboard or socket interconnect capacitance and keep the feedback resistor and compensation network close to the amplifier.
अनुपालन जानकारी
The available product information identifies the device as an Analog Devices 8-pin TO-99 operational amplifier but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.