Analog Devices

AD518JH/+ - 12 MHz Low-Offset Op Amp | Analog Devices

MPN: AD518JH/+ ✓ פעיל
15 mV maximum Vdss 120 nA Id 8-pin TO-99 hermetic metal can Package
כמות הזמנה מינימלית: 1 |

AD518JH/+ סקירה

The Analog Devices AD518JH/+ is a single-circuit general-purpose operational amplifier with a gain-bandwidth product of 12 MHz, an input offset voltage of 15 mV maximum, input bias current of 120 nA, and a slew rate of 70 V/us. The device is packaged in an 8-pin hermetic TO-99 metal-can package for applications that require a compact, single amplifier with relatively high speed and slew performance.

An operational amplifier is an active analog component that amplifies the difference between two input voltages. Within the broader semiconductor hierarchy, the AD518JH/+ belongs to the operational-amplifier category, which is part of amplifier ICs and analog signal-conditioning systems. Its primary roles include signal gain, impedance buffering, analog summation, and active filtering. The hermetic metal-can package distinguishes it from common plastic or surface-mount operational-amplifier packages.

The AD518JH/+ offers a 12 MHz gain-bandwidth product, which supports higher-frequency closed-loop operation than low-frequency general-purpose amplifiers. Its 70 V/us slew rate defines how rapidly the output can move through large voltage changes, while the 120 nA input bias current limits the disturbance introduced into high-impedance signal sources. The listed 15 mV maximum input offset voltage is material in precision DC applications and should be included in error budgets.

Operationally, the AD518JH/+ is a general-purpose voltage-feedback amplifier whose performance depends on feedback topology, source impedance, load, supply voltage, and compensation. A 12 MHz gain-bandwidth product does not mean every closed-loop circuit has 12 MHz bandwidth; practical bandwidth also depends on the selected noise gain and stability margin. Likewise, slew-rate and offset limitations should be considered when processing large-amplitude or low-level signals.

Typical uses include industrial instrumentation, low-level signal conditioning, analog measurement chains, sensor amplification, active filtering, and educational or laboratory analog circuits. The TO-99 package can also be advantageous where a through-hole mechanical format and hermetic construction are preferred over compact surface-mount assembly. Board layout still requires short feedback paths and careful grounding to avoid parasitic oscillation.

For a new design, verify the complete pin assignment and operating conditions in the Analog Devices datasheet before laying out the PCB. Keep input and feedback traces short, connect the unused input to a defined reference potential when appropriate, and check output swing and stability against the intended supply rails. The available part information does not establish whether every legacy function can be reproduced by a modern amplifier without schematic changes.

This page consolidates the confirmed AD518JH/+ electrical characteristics, package information, sourcing workflow, and practical design considerations. It also distinguishes exact-fit replacement evidence from broader functional alternatives, helping engineers assess board compatibility, offset performance, bandwidth, slew rate, and supply requirements before approving a substitution.

חלופות תחליף ישיר עבור AD518JH/+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

AD518JH/+ דירוגים מרביים ומאפיינים חשמליים

Amplifier Type General-purpose operational amplifier
Number of Channels 1 circuit
Gain-Bandwidth Product 12 MHz
Slew Rate 70 V/us
Input Offset Voltage 15 mV maximum
Input Bias Current 120 nA
מארז 8-pin TO-99 hermetic metal can
מספר פינים 8 pins
סוג הרכבה Through-hole
Manufacturer Analog Devices

מדריך תצורת פינים של AD518JH/+ 8-pin to-99 hermetic metal can

תצורת פינים עבור AD518JH/+ (מארזת 8-pin to-99 hermetic metal can). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin to-99 hermetic metal can עבור AD518JH/+

אין נתוני פריסת פינים מפורטים עבור AD518JH/+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD518JH/+ מתאים עבור 6 יישוםs: Industrial Instrumentation, Sensor Signal Conditioning, Active Analog Filtering, Precision Measurement, Test and Measurement Equipment, Educational and Laboratory Circuits.

🏭

Industrial Instrumentation

The AD518JH/+ fits legacy industrial instrumentation circuits that require a single general-purpose amplifier in an 8-pin TO-99 package. Its 12 MHz gain-bandwidth product provides useful closed-loop bandwidth when the selected noise gain is modest, while the 70 V/us slew rate allows comparatively rapid output transitions. The 15 mV maximum offset must be included in the measurement uncertainty for low-level sensor signals, and the 120 nA input bias current should be checked against the sensor output impedance. In a redesigned industrial measurement chain, engineers should compare the original AD518JH/+ characteristics with the selected modern amplifier before changing the schematic.

🧩

Sensor Signal Conditioning

AD518JH/+ can amplify weak sensor outputs in laboratory and process-control front ends when the circuit requires the original TO-99 footprint. The 120 nA input bias current limits input-loading error in high-impedance sources, while the 15 mV maximum offset sets a floor for uncalibrated DC accuracy. Its 12 MHz gain-bandwidth product and 70 V/us slew rate provide ample speed for many sensor systems operating below their bandwidth limits. Practical implementation still requires checking input bias voltage, common-mode range, output swing, and stability. Where calibration can compensate static offset and sensor impedance is moderate, the amplifier's legacy package can remain advantageous for maintaining an established board design.

🔧

Active Analog Filtering

The AD518JH/+ is suitable for active-filter stages in analog test equipment and laboratory electronics because its 12 MHz gain-bandwidth product and 70 V/us slew rate support many moderate-frequency filter designs. The amplifier can be configured for inverting, non-inverting, or summing functions, although the feedback components determine the actual response and stability. With a 15 mV maximum input offset, low-frequency or high-gain stages may require calibration to reduce DC error. Engineers should verify the complete datasheet before finalizing component values, particularly the maximum output swing and gain-bandwidth interaction. The hermetic TO-99 package also provides a practical option where through-hole assembly is preferred.

📊

Precision Measurement

AD518JH/+ may be used in precision measurement modules that depend on its established 8-pin TO-99 implementation. The 12 MHz gain-bandwidth product permits amplification over a broad signal range, but the 15 mV maximum input offset voltage is important when signals approach millivolt levels. A calibration stage can reduce fixed offset, while the 120 nA input bias current becomes significant with high source resistance. Design work should also account for bias-current compensation and the 70 V/us slew rate during signal acquisition. For a new measurement platform, compare these parameters against the actual sensor, converter, excitation source, and required settling interval rather than selecting the amplifier solely by bandwidth.

🖥️

Test and Measurement Equipment

The AD518JH/+ is appropriate for repair and extension of legacy test and measurement equipment that uses an 8-pin TO-99 general-purpose amplifier. Its 12 MHz gain-bandwidth product supports buffer, gain, and summing stages, and the 70 V/us slew rate is beneficial when the output must traverse a significant voltage range quickly. The 15 mV maximum offset should be considered in low-level measurement paths, while the 120 nA input bias current affects very high-impedance sources. When modernizing such equipment, verify pin functions, supply polarity, bypass requirements, and stability at the intended noise gain. Retaining the AD518JH/+ can minimize mechanical and schematic disruption when its original electrical performance remains suitable.

📚

Educational and Laboratory Circuits

AD518JH/+ is well suited to educational and laboratory amplifier experiments because its 8-pin TO-99 package exposes a conventional through-hole implementation and its key characteristics are straightforward to compare: 12 MHz gain-bandwidth product, 70 V/us slew rate, 15 mV maximum offset, and 120 nA input bias current. Students can analyze offset error, slew-limited large-signal behavior, closed-loop bandwidth, and bias-current effects using standard resistor networks. The package also makes breadboard or perforated-board prototyping practical compared with fine-pitch surface-mount devices. Before applying it to a sensitive measurement, check the supply and common-mode requirements from the manufacturer datasheet and include component tolerances and parasitic capacitance in the expected filter response.

What are the key specifications of AD518JH/+ that engineers should know?
The AD518JH/+ is a single-channel general-purpose operational amplifier with a 12 MHz gain-bandwidth product, 70 V/us slew rate, 15 mV maximum input offset voltage, and 120 nA input bias current. According to the AD518JH product listing published by JAK Electronics, it uses an 8-pin hermetic TO-99 metal-can package. These characteristics make it relevant to instrumentation, buffering, filtering, and other analog signal-conditioning circuits where speed and input impedance matter.
What is the operating voltage range of AD518JH/+?
The operating supply-voltage range of the AD518JH/+ is not stated in the available product information. The manufacturer datasheet must be consulted before connecting the amplifier to a particular rail. Engineers should verify supply limits, common-mode range, output swing, and input protection before using the device in a new circuit. This is especially important for a general-purpose amplifier because correct operation requires the signal and output voltages to remain inside the device's stated linear regions.
Where can I download the AD518JH/+ datasheet PDF?
The AD518JH/+ datasheet can be accessed through the linked Analog Devices AD518JH PDF hosted by icDirectory. The document should be used to confirm the 8-pin TO-99 pin assignment, electrical limits, compensation requirements, and application guidance before PCB design. The LCSC product page also links to datasheet and package resources for AD518JH/+. No manufacturer document number or revision should be inferred without checking the document itself.
Where is the AD518JH/+ pinout located?
The AD518JH/+ pinout is located in the pin-description section of the manufacturer datasheet associated with the linked AD518JH PDF. The device is identified as an 8-pin TO-99 hermetic metal can, but the individual pin names are not reproduced on the product listings used here. Use the manufacturer's drawing for the exact numbering, orientation, offset and inverting inputs, output, supply pins, and remaining connections before assigning PCB tracks.
Is AD518JH/+ suitable for instrumentation and sensor-amplifier circuits?
The AD518JH/+ can suit instrumentation and sensor-amplifier circuits when its 12 MHz bandwidth, 70 V/us slew rate, and 120 nA input bias current match the signal chain. The 15 mV maximum offset voltage must be included in the accuracy budget for low-level DC measurements. LCSC identifies the part as a single-channel operational amplifier with these principal characteristics, while final suitability depends on source impedance, sensor output range, supply voltage, and calibration requirements.
What can replace AD518JH/+ on an existing PCB?
A true drop-in replacement for the AD518JH/+ must match the 8-pin TO-99 footprint, pin assignment, supply limits, offset voltage, bandwidth, slew rate, and output capability. No substitute MPN with complete pin-to-pin and parametric confirmation was found in the available cross-reference results, so an unverified equivalent should not be approved. For a replacement decision, request manufacturer documentation for the candidate and compare every device used by the circuit, including pin bias, common-mode range, and stability.
Is AD518JH/+ the same as AD518JH?
AD518JH/+ and AD518JH refer to the same Analog Devices amplifier ordering designation in the available listings, with the plus suffix identifying the lead-finish or ordering-code version. LCSC and JAK Electronics both use the AD518JH and AD518JH/+ identifiers for the 8-pin TO-99 device. Commercial interchangeability should still be confirmed against the manufacturer ordering guide because suffix conventions can identify plating, temperature grade, or packaging attributes.
What is the best equivalent for AD518JH/+?
No cross-brand equivalent can be called the best AD518JH/+ replacement without verified 8-pin TO-99 pin compatibility and equivalent electrical limits. The available cross-reference material contains search tools and generic replacement guidance but identifies no confirmed competitor MPN. The target's 15 mV maximum offset, 12 MHz gain-bandwidth product, 70 V/us slew rate, and 120 nA bias current provide concrete acceptance criteria for evaluating any proposed substitute.
When should I choose AD518JH/+ over a modern surface-mount operational amplifier?
Choose the AD518JH/+ when an existing through-hole 8-pin TO-99 design benefits from retaining its original pin-compatible amplifier and when the required offset, bandwidth, and slew characteristics remain acceptable. A modern surface-mount amplifier may be preferable for a new compact design, but its pinout, supply range, input bias current, offset behavior, and stability must be checked rather than assumed. For repairs, matching the original schematic and package usually minimizes redesign risk.
AD518JH/+ vs modern low-noise op amps: which is better for precision DC measurement?
The AD518JH/+ is generally the safer choice for preserving a legacy TO-99 circuit, while a modern low-noise amplifier may be better for a new precision-DC design. The AD518JH/+ has a listed 15 mV maximum input offset voltage and 120 nA input bias current, so offset calibration and source-impedance effects require attention. JAK Electronics confirms the 15 mV offset and 12 MHz bandwidth figures for the original device.
Where can I buy AD518JH/+ online?
Use the Request a Quote form on this page to request AD518JH/+ availability, current lead time, minimum order quantity, and a formal quotation for the exact ordering code. The manufacturer is Analog Devices, and the device is identified as an 8-pin TO-99 general-purpose operational amplifier. Quote confirmation should include the complete AD518JH/+ designation and any required temperature, inspection, or lead-finish requirements.
What is the price of AD518JH/+?
The current AD518JH/+ unit price is shown through this page's structured pricing interface and may change as sourcing conditions change. Use the Request a Quote form for the current price, stock position, quantity breaks, and lead time for the exact MPN. The manufacturer part number is AD518JH/+; quote requests should state the desired package form and any quality or traceability requirements.
What is the lead time for AD518JH/+?
The current AD518JH/+ lead time should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, factory inventory, legacy-product allocation, inspection requirements, and shipment destination. Because the AD518JH/+ is an older 8-pin TO-99 amplifier, engineers should request a confirmed delivery schedule rather than relying on a generic stock estimate when planning a production release.
Is AD518JH/+ in stock?
AD518JH/+ availability is confirmed for each order through the Request a Quote form on this page. The product listings identify the amplifier and include stock-related information, but quantities can change independently of the page. Request the exact suffix, required quantity, and shipment destination so the supplier can return a current stock and lead-time confirmation.
What design checks are required for an AD518JH/+ amplifier circuit?
The essential checks are supply range, input common-mode range, output swing, gain-bandwidth product, slew rate, offset voltage, bias current, stability, and pin assignment. The confirmed device characteristics include 12 MHz gain-bandwidth product, 70 V/us slew rate, 15 mV maximum offset, and 120 nA input bias current. Keep feedback paths short and follow the manufacturer's application guidance, especially when the source impedance is high or the closed-loop gain is low.

נתוני עזר הנדסיים עבור AD518JH/+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD518JH/+ when maintaining an existing 8-pin TO-99 circuit, reproducing a legacy measurement module, or completing a repair where changing the footprint would introduce unnecessary risk. Its 12 MHz gain-bandwidth product, 70 V/us slew rate, 120 nA input bias current, and 15 mV maximum offset are the principal acceptance criteria. For a new compact or low-offset system, a modern surface-mount amplifier may offer better accuracy, lower bias current, or smaller size, but that choice is not a drop-in replacement because the package and pinout change. No confirmed drop-in alternative was available, so substitution should proceed only after the candidate's complete 8-pin TO-99 pin assignment, supply limits, common-mode range, output swing, stability, and acquisition performance are verified.

השוואה עם חלופות

פרמטר מוצר זה
Brand Analog Devices
Package 8-pin TO-99 hermetic metal can
Amplifier Type General-purpose operational amplifier
Number of Channels 1 circuit
Gain-Bandwidth Product 12 MHz
Slew Rate 70 V/us
Input Offset Voltage 15 mV maximum
Input Bias Current 120 nA
Mounting Type Through-hole

מבדילים עיקריים

  • 12 MHz gain-bandwidth product for legacy analog signal paths (לעומתNo verified drop-in alternative)
  • Established 8-pin hermetic TO-99 mechanical format (לעומתNo verified drop-in alternative)
  • Defined input bias and offset characteristics (לעומתNo verified drop-in alternative)

הערות תכנון

Route the output back to the inverting-input node through the shortest practical feedback path. Keep the non-inverting input and feedback components away from high-current switching nodes, and place power-bypass capacitors close to the device pins. Because the AD518JH/+ uses an 8-pin TO-99 package, preserve the manufacturer's pin numbering and package orientation exactly; the physical drawing and schematic symbols should be cross-checked before fabrication.

Do not treat the 12 MHz gain-bandwidth product as the closed-loop bandwidth of every circuit. Actual bandwidth depends on the selected closed-loop gain and the amplifier's stability behavior. The 15 mV maximum input offset also means that low-level DC measurements can require trimming or calibration. Confirm the supply range, input common-mode range, output swing, and bias requirements in the manufacturer datasheet before energizing the circuit.

For high-impedance sources, account for the 120 nA input bias current before adding input capacitance. The resulting bias-current error can be reduced with a compensating resistor whose value approximates the source resistance, but its noise and tolerance must be included in the design. At high frequency, minimize breadboard or socket interconnect capacitance and keep the feedback resistor and compensation network close to the amplifier.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product information identifies the device as an Analog Devices 8-pin TO-99 operational amplifier but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ad518 gme AD518JH/+ datasheet AD518JH/+ pinout AD518JH/+ datasheet pdf AD518JH/+ TO-99 AD518JH/+ 12 MHz AD518JH/+ 70 V/us AD518JH/+ equivalent AD518JH/+ replacement AD518JH/+ price Analog Devices AD518JH/+ AD518JH/+ operational amplifier

רכיבים ומונחים קשורים

Analog Devices AD518JH/+ AD518JH operational amplifier general-purpose amplifier amplifier IC analog signal conditioning voltage-feedback amplifier gain-bandwidth product slew rate input offset voltage input bias current TO-99 8-pin hermetic metal can through-hole package active filter industrial instrumentation sensor signal conditioning test and measurement equipment closed-loop bandwidth common-mode voltage range output swing feedback network RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר