Analog Devices

AD53/009-9 - 40-Channel 14-Bit Parallel DAC | Analog Devices

MPN: AD53/009-9 ✓ सक्रिय
2.7 V to 3.6 V Vdss 115 μA Id TQFP-80 (14 mm × 14 mm) Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD53/009-9 अवलोकन

The Analog Devices AD53/009-9 is a 40-channel, 14-bit, single-supply voltage-output digital-to-analog converter packaged in a TQFP-80 (14 mm × 14 mm) package. It is designed for parallel-interface systems requiring multiple independently controlled analog outputs. The device operates from a 2.7 V to 3.6 V supply according to its distributor listing, with datasheet summaries also describing 2.5 V to 5.5 V operation and a typical current consumption of 115 μA. These electrical characteristics place the part in the family of low-power, multi-channel DACs used for signal generation, calibration, and test-system control.

A digital-to-analog converter is a data-acquisition IC that converts digital codes into proportional analog voltages or currents. Its functional hierarchy runs from converter to DAC, then to data-conversion IC and analog signal-chain component. In a multi-channel implementation, one converter can replace dozens of discrete output stages, simplifying firmware-driven level control while reducing wiring and synchronization overhead. The AD53/009-9 is particularly relevant where 14-bit output resolution and 40 parallel-output channels are required in one device.

The principal features include 40 voltage-output channels, 14-bit resolution, a parallel digital interface, and a single-supply architecture. The TQFP-80 package provides the pin count needed for the parallel data bus and analog output connections. The low 115 μA operating-current figure makes the converter appropriate for low-power telemetry, communications, and embedded test equipment, provided the total system power budget is checked against the selected output range and update rate.

The AD53/009-9 is associated with GSM baseband and wireless communications signal-generation applications. A parallel-interface DAC is useful where the host processor must update many outputs in a deterministic sequence, such as baseband modulation, transmit-path calibration, laboratory stimulus generation, or programmable test fixtures. Because the converter uses 14-bit words, one output code represents 16,384 discrete levels, supporting fine control where coarse 8-bit or 10-bit outputs would introduce visible quantization steps.

Typical uses include GSM baseband test equipment, RF and communications calibration systems, multi-level control networks, industrial process-control instrumentation, automated test equipment, and general-purpose data-acquisition platforms. In these systems, the AD53/009-9 can generate control levels for multiple analog blocks while the parallel interface simplifies connection to a digital controller. System-level settling time, output reference accuracy, and output-noise specifications must be confirmed from the complete manufacturer datasheet before setting update rates.

When laying out the board, route the parallel data bus with controlled trace lengths and keep the analog outputs away from high-current switching nodes. Use a quiet reference source and follow the manufacturer recommendation for bypass capacitance and output-load conditions. Because the exact pin assignments and layout guidance are not shown on the product-page excerpts, use the pin-description table and recommended application circuit in the manufacturer datasheet when assigning tracks.

This page organizes the confirmed device identity, electrical envelope, package information, sourcing guidance, and engineering considerations for the AD53/009-9. It also provides design-focused application guidance and verification notes that help engineers evaluate the converter for multi-channel analog-output designs before committing to a production BOM.

के लिए ड्रॉप-इन विकल्प AD53/009-9 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

AD53/009-9 Maximum Ratings और Electrical Characteristics

Number of DAC Channels 40 channels
रेज़ोल्यूशन 14 bits
आउटपुट प्रकार Single voltage-output DAC
Digital Interface Parallel
Supply Voltage Range 2.7 V to 3.6 V
Alternate Supply Voltage Range 2.5 V to 5.5 V
Supply Configuration Single supply
Operating Current 115 μA
पैकेज TQFP-80 (14 mm × 14 mm)
माउंटिंग प्रकार Surface mount
पिन काउंट 80 pins
Output Levels per Channel 16,384 codes (14-bit resolution)
Technology CMOS
Application Category Data acquisition and telecom circuit

AD53/009-9 tqfp-80 (14 mm × 14 mm) पिन कॉन्फ़िगरेशन गाइड

AD53/009-9 (tqfp-80 (14 mm × 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD53/009-9 के लिए tqfp-80 (14 mm × 14 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD53/009-9.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD53/009-9 के लिए उपयुक्त है 6 अनुप्रयोगs: GSM Baseband Signal Generation, RF and Communications Calibration, Automated Test Equipment, Industrial Process-Control Levels, Programmable Test Fixtures, Low-Power Data-Acquisition Platforms.

🌐

GSM Baseband Signal Generation

The AD53/009-9 is suited to parallel multi-level generation in GSM baseband test and calibration equipment because it combines 40 voltage-output channels with 14-bit resolution. Each channel represents 16,384 discrete codes, supporting finer stimulus control than an 8-bit or 10-bit converter. The 80-pin TQFP package keeps the converter count low when many controlled levels are required, although the parallel bus must be routed with attention to timing. Confirm settling time, full-scale accuracy, and channel-to-channel matching against the modulation bandwidth before fixing the update schedule.

📡

RF and Communications Calibration

In RF and communications calibration equipment, the AD53/009-9 can provide multiple independently addressed analog levels from one controller. Its 40-channel parallel architecture reduces the number of discrete output stages, while 14-bit resolution gives 16,384 selectable steps per channel. The listed 115 μA operating-current figure is useful in low-power instrumentation, but reference quality and output settling determine usable accuracy. Use a low-noise reference, defined trace geometry, and the manufacturer recommended-load network to prevent calibration drift and channel interaction.

🖥️

Automated Test Equipment

The AD53/009-9 fits automated test equipment that must apply many analog stimulus points while coordinating data, clock, and channel-selection signals through a parallel interface. Forty 14-bit voltage outputs allow a single converter to replace numerous single-channel devices and simplify software addressing. The 2.7 V to 3.6 V listing range supports compact 3.3 V test systems, but fixture loading and cable capacitance can affect settling. Validate the complete analog path at the fixture and place output buffering near the connector when long cables are unavoidable.

🏭

Industrial Process-Control Levels

The AD53/009-9 can supply multiple programmable voltage levels for industrial process-control and instrumentation subsystems where several actuator or test nodes require independent commands. Its 40 channels and 14-bit resolution provide 16,384 discrete levels on each output, enabling fine set-point adjustment without a large bank of discrete dividers. The low 115 μA operating current supports compact control electronics, provided channel update rates match the process-control loop. Keep sensitive analog routing away from switching power stages and use the manufacturer grounding recommendations.

🔧

Programmable Test Fixtures

Programmable test fixtures benefit from the AD53/009-9 because 40 voltage outputs can emulate multiple expected conditions without duplicating converter circuitry across the fixture. The parallel interface allows a controller to update a defined set of channels in a deterministic sequence, while 14-bit resolution supports precise level selection. For long fixture wiring, treat the converter outputs as a starting point and add appropriate buffering where capacitance or crosstalk could affect settling. Verify channel order and update timing in firmware against the manufacturer pin and timing tables.

📊

Low-Power Data-Acquisition Platforms

The AD53/009-9 is applicable to low-power data-acquisition platforms that require numerous controllable analog outputs rather than high-rate waveform generation. Its 40 channels provide broad control flexibility, 14-bit resolution supplies 16,384 codes per output, and the 115 μA operating-current figure supports compact power budgets. A parallel bus is advantageous when the host processor drives several channels concurrently, but it requires enough board area for the 80-pin TQFP and careful signal-integrity work. Use the datasheet settling-time curves to set the maximum channel-update rate.

What is the AD53/009-9?
The AD53/009-9 is a 40-channel, 14-bit, parallel-interface, single-supply voltage-output digital-to-analog converter from Analog Devices. It is packaged in an 80-pin TQFP measuring 14 mm × 14 mm. The 40-channel architecture and 14-bit resolution make it suitable for multi-level analog signal generation, baseband control, calibration, and automated test systems. A distributor listing identifies its supply range as 2.7 V to 3.6 V, while the datasheet summary also describes 2.5 V to 5.5 V operation.
How many channels and bits does the AD53/009-9 provide?
The AD53/009-9 provides 40 voltage-output channels with 14-bit resolution. Each channel can represent 16,384 distinct digital codes, giving designers substantially finer control granularity than an 8-bit or 10-bit converter. The 80-pin TQFP package accommodates the parallel data interface and the numerous channel connections. Use the manufacturer pin-description table when routing the bus because individual channel, data, clock, reference, and supply assignments must be confirmed against the complete datasheet.
What supply voltage does the AD53/009-9 use?
The distributor product listing identifies a 2.7 V to 3.6 V operating range for the AD53/009-9. A separate datasheet summary describes the converter as a 2.5 V to 5.5 V single-supply device and lists 115 μA operating current. Because these summaries present different ranges, use the supply limits, absolute maximum ratings, and decoupling requirements in the complete Analog Devices datasheet as the controlling authority for the selected grade.
Where can I download the AD53/009-9 datasheet PDF?
The AD53/009-9 datasheet PDF is available through the Analog Devices document listing linked from the product page for this MPN. The document is indexed as an 8-page data sheet in the manufacturer-document archive, and a separate document index provides the searchable AD53/009-9 PDF entry. Before schematic capture, review the pin-description table, recommended application circuit, reference-source requirements, and package-dimension drawing. Those details determine the external network and land pattern.
Where can I find the AD53/009-9 pinout?
The AD53/009-9 pinout is documented in the pin-description table of the manufacturer datasheet and in the package pinout diagrams referenced on the product page. The device uses an 80-pin TQFP package with a 14 mm × 14 mm body, so the board footprint must not be confused with smaller 48-pin, 64-pin, or 100-pin TQFP options. Assign PCB nets only after matching each numbered terminal to its data, address, clock, reference, output, and supply function in the datasheet.
What is the difference between the AD53/009-9 and a single-channel DAC?
The AD53/009-9 integrates 40 independently addressed 14-bit voltage outputs into one package, whereas a single-channel DAC provides only one output. A system requiring many analog levels can therefore use one multi-channel converter and a parallel bus instead of distributing numerous individual DAC circuits. The practical trade-off is the larger 80-pin footprint and the need for careful bus routing, while the benefit is fewer external converter packages and more consistent multi-channel control.
Is the AD53/009-9 suitable for GSM baseband applications?
Yes, the AD53/009-9 is identified as a GSM baseband processing chipset and as a telecom circuit, while its electrical summary describes a 40-channel, 14-bit voltage-output DAC. These characteristics align with parallel multi-level generation and calibration functions in communications equipment. The converter should be selected only after confirming settling time, output-reference accuracy, channel-to-channel behavior, and interface timing against the baseband bandwidth and modulation accuracy required by the system.
How does the AD53/009-9 compare with the AD504SH?
The AD504SH is also an Analog Devices converter product, but it is not confirmed as a pin-to-pin replacement for the 80-pin AD53/009-9. The target device combines 40 channels, 14-bit resolution, and a parallel interface in a TQFP-80 package. Treat the AD504SH as a design alternative for evaluation, not as a drop-in substitute, unless the manufacturer package drawing, pin functions, supply limits, and electrical ratings are shown to match. This distinction prevents an unintended board-level redesign.
When should I choose the AD53/009-9 instead of a multi-channel competitor?
Choose the AD53/009-9 when a design needs 40 analog outputs with 14-bit resolution, a parallel interface, and operation from a low-power single supply in one TQFP-80 device. It is particularly attractive where a processor must drive many baseband or calibration levels and where a compact, high-channel-count package is more important than a serial interface. If the system requires fewer channels, higher update rates, different logic levels, or a smaller package, compare the complete timing and pin maps before deciding.
Is the AD53/009-9 suitable for automated test equipment?
Yes, the AD53/009-9 fits multi-level automated test equipment that must generate many analog stimulus points from one controller. Its 40 channels and 14-bit resolution provide 16,384 selectable codes per output, while the parallel interface can support deterministic updates in a synchronized test sequence. Validate full-scale accuracy, settling time, crosstalk, and output-noise requirements against the fastest test timing before use. The manufacturer application circuit should guide output loading and reference selection.
What can replace the AD53/009-9?
No pin-to-pin replacement for the AD53/009-9 has been established, so a substitution should not be assumed from a similar catalog description. A genuine drop-in candidate must match the TQFP-80 land pattern, pin functions, parallel interface timing, 40-channel architecture, supply requirements, and output performance. For an existing PCB, request an engineering review of the proposed substitute. For a new design, evaluate other Analog Devices multichannel DAC families only after confirming the electrical and timing requirements.
Is there a cross-brand equivalent for the AD53/009-9?
No cross-brand drop-in equivalent is confirmed for the AD53/009-9. Its 80-pin TQFP footprint, 40-channel organization, 14-bit resolution, parallel interface, and supply characteristics make a generic substitution risky. Component search tools can identify parametrically similar converters, but a similar resolution or channel count does not establish pin compatibility. Require a manufacturer pin map, footprint comparison, timing review, and application-level test before treating any cross-brand candidate as a replacement.
Where can I buy the AD53/009-9 online?
The AD53/009-9 can be requested through the Request a Quote form on this product page. The form lets you specify the required quantity, delivery target, and inspection requirements before placing an order. Because availability and commercial terms can change, use the form to obtain a current quotation instead of relying on a historical catalog amount. Include the full MPN, AD53/009-9, when requesting pricing so the offer is matched to the exact orderable device.
What is the price of the AD53/009-9?
Use the Request a Quote form on this page for the current AD53/009-9 price. The form provides a direct route for quantity pricing, availability confirmation, and delivery terms, which are more accurate than historical listings for a low-volume or legacy converter. Provide the required annual and prototype quantities plus any packaging preference. Do not treat an archived marketplace amount as a current quotation, because market conditions and distributor inventory can change without notice.
What is the lead time and stock status for the AD53/009-9?
Request the current stock position and lead time through the Request a Quote form on this page. One distributor listing describes the AD53/009-9 as in stock, but inventory is time-sensitive and should be confirmed for the exact package, grade, quantity, and shipment destination. Include a required delivery date in the request. For production planning, request a scheduled delivery and any traceability or inspection documentation at the same time.
Does the AD53/009-9 need a heatsink?
Heatsink requirements cannot be determined from the confirmed package and supply information alone. The listed operating current of 115 μA indicates low current consumption, but internal dissipation also depends on output voltage, load current, update rate, supply voltage, and reference configuration. Use the manufacturer power-dissipation data and the device thermal ratings for the exact operating condition. Provide adequate exposed-board copper and follow the datasheet layout guidance even if a separate heatsink is not required.

के लिए इंजीनियरिंग संदर्भ डेटा AD53/009-9 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AD53/009-9 when the design needs 40 independently controlled, 14-bit voltage outputs in a single TQFP-80 device and the host controller can support a parallel bus. It is especially relevant to GSM baseband test, RF calibration, programmable fixtures, and low-power multi-level control systems. Its low 115 μA operating-current figure and 2.7 V to 3.6 V listed supply range suit compact 3.3 V designs. Do not treat AD504SH, AD503JH, AD506KH, or AD506JH as drop-in substitutes because matching the 80-pin land pattern, pin functions, timing, and electrical limits has not been established. If the design requires a serial interface, a smaller package, higher channel-update rates, or different absolute accuracy, evaluate a different converter family instead.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand Analog Devices
Package TQFP-80 (14 mm × 14 mm)
Number of DAC Channels 40 channels
Resolution 14 bits
Output Configuration Single voltage-output
Digital Interface Parallel
Supply Voltage 2.7 V to 3.6 V
Operating Current 115 μA
Technology CMOS
Application Category Data acquisition and telecom circuit

मुख्य विशेषताएँ

  • High channel density in a single converter (बनामAD504SH)
  • Fourteen-bit command resolution (बनामAD503JH)
  • Parallel multi-channel interface (बनामAD506JH)

डिज़ाइन नोट्स

Route the parallel data, address, and clock signals as a controlled-length bus, and keep the 80-pin TQFP footprint free of unrelated high-current switching paths. Confirm every terminal assignment in the manufacturer pin-description table before schematic capture. Because the converter provides 40 analog outputs, allocate analog routing away from digital return currents and use a continuous ground reference beneath the device where the recommended layout permits it.

Use the manufacturer settling-time curves to set the minimum interval between an output-code update and a measurement. The 14-bit resolution produces 16,384 steps, but useful accuracy can be limited by output noise, reference quality, load capacitance, and incomplete settling. Do not infer timing from resolution alone. Check the complete datasheet for recommended loads, output buffers, and reference-source impedance, and preserve those conditions in the final board layout.

Confirm the actual supply range for the ordered grade using the complete Analog Devices datasheet, since product summaries show both 2.7 V to 3.6 V and 2.5 V to 5.5 V descriptions. Place the manufacturer-recommended bypass capacitors next to the supply terminals and keep reference-decoupling connections short. Treat the 115 μA operating-current figure as a baseline rather than a complete system-power estimate because reference current and output-load conditions also contribute.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance declarations are not identified in the product-page excerpts. Confirm RoHS, REACH, halogen-free, and conflict-minerals status for the exact ordered part number with the manufacturer or the authorized supply channel before release.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD53/009-9 datasheet AD53/009-9 datasheet pdf AD53/009-9 pinout AD53/009-9 specifications Analog Devices AD53/009-9 AD53/009-9 TQFP-80 AD53/009-9 40-channel DAC AD53/009-9 14-bit converter AD53/009-9 equivalent AD53/009-9 replacement AD53/009-9 GSM baseband AD53/009-9 price AD53/009-9 stock AD53/009-9 footprint

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD53/009-9 AD504SH AD503JH AD506KH AD506JH digital-to-analog converter DAC voltage-output DAC parallel interface 14-bit resolution 40 channels single supply TQFP-80 surface mount SMD data-acquisition IC GSM baseband RF calibration automated test equipment programmable test fixture process control CMOS output settling time reference voltage
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें