Analog Devices

AD604ARSZ - Dual Ultralow Noise VGA | Analog Devices

MPN: AD604ARSZ ✓ सक्रिय
24-lead SSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD604ARSZ अवलोकन

The Analog Devices AD604ARSZ is a dual-channel, ultralow-noise variable gain amplifier optimized for time-based variable gain control, with particular emphasis on ultrasound systems. Its two channels are controlled through a linear-in-dB gain-control architecture, while the device also supports broader instrumentation applications requiring low noise and wide bandwidth. The AD604ARSZ is manufactured in a 24-lead SSOP package. The manufacturer identifies the AD604 family as a production device and documents the product in Data Sheet Rev. G.

A variable gain amplifier, or VGA, is a special-purpose amplifier that changes signal gain under electronic control while preserving the operating characteristics needed for precision signal processing. The VGA belongs to the amplifier-IC hierarchy and ultimately supports broader analog signal-chain, measurement, medical-imaging, and communication systems. Unlike a fixed-gain amplifier, a VGA allows receiver gain to be adjusted without changing the underlying signal path or requiring multiple discrete gain stages.

The AD604's principal differentiator is its combination of two independently controlled channels, ultralow noise, accurate linear-in-dB gain behavior, and broad bandwidth. This combination is useful when a system must recover signals spanning a wide input amplitude range without adding excessive circuit complexity. The dual-channel arrangement can also reduce board area in systems that need matched amplification paths, particularly when the two channels process related or simultaneous signals.

According to the Analog Devices product page, the AD604 is optimized for ultrasound applications that use time-based gain control, although its low-noise characteristics make it suitable for any application requiring variable gain and wide bandwidth. A typical ultrasound receiver can vary gain as returning echoes become weaker with depth. The AD604 provides a controlled way to maintain useful signal amplitude through the receiver chain while keeping gain settings predictable in decibels.

Potential uses include ultrasound diagnostic imaging, medical instrumentation, precision signal acquisition, communications receivers, test and measurement equipment, and industrial imaging. In each case, the system designer should confirm the required gain range, gain-control slope, bandwidth, input noise, output swing, supply voltage, and pin-compatible configuration against the manufacturer data sheet before finalizing the circuit.

PCB design should preserve short, low-noise signal paths and keep the gain-control inputs away from high-current switching nodes. Because the amplifier is intended for low-noise signal chains, stable reference and supply bypassing, careful grounding, and controlled layout around both channels are essential. Use the manufacturer pin-description table and recommended application circuit when assigning traces and selecting external components.

This page combines manufacturer product information, packaging identification, sourcing guidance, drop-in family comparisons, and practical design considerations for engineers evaluating the AD604ARSZ. It also distinguishes the electrically identical order-code variants that matter when transferring a validated ultrasound or precision-amplifier design between tube, reel, and production-order configurations.

के लिए ड्रॉप-इन विकल्प AD604ARSZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD604ARSZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type.

Analog Devices
Product Type: Dual variable gain amplifier
इसके साथ तुलना करें AD604ARSZ →

AD604ARS

✅ ड्रॉप-इन
Analog Devices
📦 24-lead SSOP
Dual variable gain amplifier · 2 channels · Linear in dB · 40 MHz · 170 V/µs · 40 mA · 24-lead SSOP · Ultrasound receive signal chains

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD604ARSZ-RL

✅ ड्रॉप-इन
📦 24-lead SSOP
Uses the same dual AD604 VGA and 24-lead SSOP configuration; the identified electrical differences are 0 V and 0 A, with reel or logistics designation differing

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD604ARSZ-R7

✅ ड्रॉप-इन
📦 24-lead SSOP
Uses the same dual AD604 VGA and 24-lead SSOP configuration; the identified electrical differences are 0 V and 0 A, with the R7 order and tape-and-reel designation differing

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD604ARS-REEL

✅ ड्रॉप-इन
📦 24-lead SSOP
Uses the same dual AD604 VGA and 24-lead SSOP configuration; the identified electrical differences are 0 V and 0 A, with the reel shipment designation differing

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD604ARSZ-R2

✅ ड्रॉप-इन
📦 24-lead SSOP
Uses the same dual AD604 VGA and 24-lead SSOP configuration; the identified electrical differences are 0 V and 0 A, with the R2 order and packaging designation differing

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD604ARSZ Maximum Ratings और Electrical Characteristics

Product Type Dual-channel variable gain amplifier
Number of Circuits 2 circuits
Gain Control Linear-in-dB variable gain control
Noise Performance Ultralow noise
Primary Optimization Time-based variable gain control for ultrasound applications
पैकेज 24-lead SSOP
माउंटिंग प्रकार Surface mount

AD604ARSZ 24-lead ssop पिन कॉन्फ़िगरेशन गाइड

AD604ARSZ (24-lead ssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD604ARSZ के लिए 24-lead ssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD604ARSZ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD604ARSZ के लिए उपयुक्त है 6 अनुप्रयोगs: Ultrasound Diagnostic Receiver, Medical Imaging Signal Chain, Precision Communications Receiver, Industrial Test and Measurement, Precision Signal Acquisition, Wide-Bandwidth Analog Receiver.

🩺

Ultrasound Diagnostic Receiver

The AD604ARSZ fits ultrasound receiver front ends because it is optimized for time-based variable gain control and provides two low-noise amplifier channels. Echo strength changes with tissue depth and return time, so the receiver must adjust gain while maintaining predictable linear-in-dB behavior. The dual-channel architecture can support two acquisition paths while conserving board area. According to the AD604 manufacturer page, the amplifier is intended for ultrasound applications but remains suitable for other low-noise, wide-bandwidth systems. Before layout release, verify the required gain range, control slope, bandwidth, supply voltage, and output swing in Data Sheet Rev. G.

🩺

Medical Imaging Signal Chain

The AD604ARSZ is applicable to medical imaging front ends where weak sensor signals must be amplified without adding excessive circuit noise. Its ultralow-noise dual-channel architecture supports simultaneous or closely related signal paths, while linear-in-dB gain control provides a predictable relationship between control voltage and attenuation or gain. This is valuable when receiver amplitude varies over a broad dynamic range. The same-family AD604ARS order code can support laboratory evaluation, but production selection must follow the confirmed suffix, temperature grade, and 24-lead SSOP package requirements.

🌐

Precision Communications Receiver

The AD604ARSZ can serve as the variable-gain element in a precision receiver when signal strength changes with distance, channel conditions, or transmitted power. Linear-in-dB control simplifies system-level gain planning because engineers can express attenuation or amplification directly in decibels. Its dual-channel organization is useful for architectures that compare, mix, or monitor related baseband signals. The wide-bandwidth positioning described by Analog Devices supports broader receiver use, but designers should confirm noise density, stable gain-control behavior, supply headroom, and output drive against the exact data sheet before layout.

🔧

Industrial Test and Measurement

The AD604ARSZ is suitable for test and measurement front ends that must adapt to a wide range of input amplitudes while maintaining low noise. A variable gain stage can reduce the required number of fixed attenuator and amplifier sections, improving signal-chain flexibility. Its two channels allow a single package to implement matched gain paths for a measurement input and a reference or monitor signal. Application engineers should pay particular attention to gain-control linearity, bandwidth, output swing, and bypass stability. The AD604ARS family provides related order codes for laboratory prototypes and production configurations.

📡

Precision Signal Acquisition

The AD604ARSZ can be used in precision acquisition systems where the source amplitude varies but the measurement chain must retain useful dynamic range. Its ultralow-noise characteristic is valuable when small signals pass through multiple analog stages, and the linear-in-dB control model simplifies calibration tables and software control. The dual-channel arrangement may also support differential or multi-node acquisition when the two paths are configured appropriately. Confirm common-mode range, supply voltage, gain-control limits, and channel matching in the manufacturer documentation before selecting component tolerances or external filtering.

📶

Wide-Bandwidth Analog Receiver

The AD604ARSZ fits wide-bandwidth analog receiver designs requiring electronic gain adjustment rather than a fixed gain path. Analog Devices describes the AD604 as suitable for any application requiring low noise, wide bandwidth, and variable gain, beyond its primary ultrasound focus. This makes it relevant to instrumentation and communication receivers where programmable attenuation must follow changing signal levels. PCB implementation should minimize parasitic capacitance at high-speed control and signal nodes, maintain short ground returns, and preserve the manufacturer bypass recommendations. Numerical bandwidth and slew-rate limits must be taken directly from Data Sheet Rev. G.

अनुशंसित उत्पादों का सारांश

AD604ARS Analog Devices उपयोग में: Ultrasound Diagnostic Receiver, Precision Communications Receiver, Precision Signal Acquisition AD604ARSZ-RL Same-family order-code alternative उपयोग में: Ultrasound Diagnostic Receiver, Industrial Test and Measurement AD604ARSZ-R7 Same-family production configuration उपयोग में: Medical Imaging Signal Chain, Industrial Test and Measurement, Wide-Bandwidth Analog Receiver AD604ARS-REEL Same-family manufacturing configuration उपयोग में: Medical Imaging Signal Chain, Precision Signal Acquisition AD604ARSZ-R2 Same-family order-code alternative उपयोग में: Precision Communications Receiver, Wide-Bandwidth Analog Receiver
What is the AD604ARSZ?
The AD604ARSZ is a dual-channel, ultralow-noise variable gain amplifier from Analog Devices. According to the AD604 manufacturer product page, it uses linear-in-dB gain control, is optimized for time-based variable gain control in ultrasound equipment, and is also suitable for applications requiring low noise, wide bandwidth, and variable gain. The specified order code is supplied in a 24-lead SSOP package.
What are the key specifications of AD604ARSZ that engineers should know?
The key AD604ARSZ characteristics are dual-channel operation, linear-in-dB variable gain control, ultralow noise, and suitability for wide-bandwidth signal chains. Analog Devices identifies the AD604 as a production device and publishes its specifications in Data Sheet Rev. G. The AD604ARSZ order code is packaged in a 24-lead SSOP, while detailed gain range, bandwidth, supply voltage, and temperature limits are defined in the manufacturer data sheet.
Is AD604ARSZ suitable for ultrasound receiver applications?
Yes, the AD604ARSZ is specifically optimized for time-based variable gain control in ultrasound systems. Its dual-channel architecture, linear-in-dB gain behavior, ultralow-noise characteristics, and wide bandwidth support receiver chains that must accommodate echo amplitudes changing with time and depth. The manufacturer also states that the AD604 can serve other systems requiring low-noise, wide-bandwidth variable gain.
Where can I download the AD604ARSZ datasheet PDF?
The official AD604ARSZ documentation is available through the Analog Devices AD604 product page at https://www.analog.com/en/products/ad604.html. The manufacturer page links the AD604 Data Sheet, identified as Rev. G, along with product-selection information and technical resources. Use the official document for the complete electrical characteristics, pin-description table, application circuit, and ordering information.
Where can I find the AD604ARSZ pinout?
The AD604ARSZ pinout is found in the pin-description table and package drawing in the official Analog Devices AD604 Data Sheet Rev. G. The component is a 24-lead SSOP, and both channels include their own signal and gain-control connections. Use the manufacturer diagram when assigning PCB pads so that pin numbering, orientation, and dual-channel routing match the selected AD604ARSZ order code.
Where can I buy AD604ARSZ online?
The AD604ARSZ can be requested through the Request a Quote form on this XAIPART product page. The quote form is the appropriate channel for checking current availability, order quantities, and delivery timing for the exact AD604ARSZ suffix. The AD604ARSZ is identified in the 24-lead SSOP package, so confirm that the quoted line item retains the same order code and package configuration.
What is the price of AD604ARSZ?
The current AD604ARSZ price can be obtained through the Request a Quote form on this page, which returns pricing for the exact order code and requested quantity. The Analog Devices AD604 product page lists product-family pricing information, but platform pricing should not be inferred for a specific package suffix from that summary. Use the quote form to confirm the current commercial terms.
What is the lead time for AD604ARSZ?
The current lead time for AD604ARSZ should be confirmed through the Request a Quote form on this page. Lead time can depend on the exact suffix, package, order quantity, and production status at the time of inquiry. The manufacturer identifies the AD604 family as production, so requesting the AD604ARSZ configuration directly provides the most appropriate commercial answer without assuming a stock level.
Is AD604ARSZ in stock?
Current stock for AD604ARSZ is best checked through the Request a Quote form on this XAIPART page. Supply status should be tied to the exact 24-lead SSOP order code rather than inferred from general AD604 listings or different suffix configurations. Submit the required quantity and delivery location in the form to obtain a current availability response.
What is the best drop-in replacement for AD604ARSZ?
The closest supported replacements are AD604-family order codes that retain the same 24-lead SSOP configuration and electrical function, including AD604ARS and the AD604ARSZ-RL and AD604ARSZ-R7 order codes identified in product references. These options primarily differ by ordering or packaging designation. Confirm the exact pinout, temperature grade, and shipment format in the AD604 documentation before replacing a released design.
Can AD604ARSZ-RL replace AD604ARSZ?
AD604ARSZ-RL can serve as a same-package family alternative to AD604ARSZ because both are identified as the dual AD604 variable gain amplifier in a 24-lead SSOP. The available product references do not quantify an electrical difference between these order codes. Before substitution, verify the package drawing, pin functions, operating-temperature grade, and approved order code against the manufacturer documentation.
AD604ARS vs AD604ARSZ - which is better for an ultrasound design?
AD604ARSZ is preferable when the released design specifically requires the Z-suffixed order code and its confirmed 24-lead SSOP configuration; AD604ARS is a closely related AD604-family option. Both serve as dual variable gain amplifiers with linear-in-dB control and ultralow noise. The decision should follow the exact suffix, temperature grade, package orientation, and supply qualification specified for the original equipment.
When should I choose AD604ARSZ over AD604ARSZ-RL?
Choose AD604ARSZ when the original bill of materials and manufacturing flow call for that exact Z-suffixed order code. Choose AD604ARSZ-RL when its documented order code, temperature grade, and package are approved for the assembly process. Because both belong to the same AD604 family and use the 24-lead SSOP, the selection should be controlled by exact sourcing and qualification requirements rather than basic amplifier functionality.
What is the best Analog Devices equivalent for AD604ARSZ?
The best supported Analog Devices equivalent is another documented AD604-family order code in the same 24-lead SSOP configuration, such as AD604ARS, AD604ARSZ-RL, or AD604ARSZ-R7. The AD604 manufacturer page confirms the common dual-channel, ultralow-noise, linear-in-dB variable-gain-amplifier architecture. Select the suffix whose temperature rating, package details, and qualification records satisfy the target application.
What can replace AD604ARSZ?
AD604ARS, AD604ARSZ-RL, AD604ARSZ-R7, AD604ARS-REEL, and AD604ARSZ-R2 are order-code alternatives associated with the same AD604 family in the available product references. They should be treated as same-family configuration options rather than functionally different amplifier designs. Verify pin compatibility, temperature range, package orientation, and lifecycle status in the official AD604 documentation before releasing a substitution.
Is AD604ARSZ compliant with RoHS and REACH?
The available AD604 product references identify a RoHS category but do not provide the exact compliance declaration text for the AD604ARSZ order code. Confirm RoHS and REACH status for the selected suffix from the manufacturer product page or declaration documents before using the amplifier in a restricted-market design. Automotive qualification is also not established for this order code by the product information shown.

के लिए इंजीनियरिंग संदर्भ डेटा AD604ARSZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose AD604ARSZ when the released ultrasound, medical-imaging, instrumentation, or receiver design specifically calls for the Z-suffixed order code and its documented 24-lead SSOP configuration. AD604ARS is a same-family choice when its exact suffix, temperature grade, and assembly format meet the product requirements. AD604ARSZ-RL, AD604ARSZ-R7, AD604ARS-REEL, and AD604ARSZ-R2 can support equivalent AD604-family sourcing when their order-code definitions are approved. All listed alternatives retain the dual-channel, linear-in-dB variable-gain-amplifier concept and the 24-lead SSOP package, but they should not be treated as substitutes for a part with different pin functions or electrical ratings. Before final selection, compare gain range, gain-control slope, bandwidth, noise density, supply voltage, output swing, and operating temperature in the official AD604 documentation.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD604ARS AD604ARSZ-RL AD604ARSZ-R7 AD604ARS-REEL AD604ARSZ-R2
Package 24-lead SSOP 24-lead SSOP 24-lead SSOP 24-lead SSOP 24-lead SSOP 24-lead SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Type Dual variable gain amplifier Dual variable gain amplifier Dual variable gain amplifier Dual variable gain amplifier Dual variable gain amplifier Dual variable gain amplifier
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Gain Control Linear-in-dB Linear-in-dB Linear-in-dB Linear-in-dB Linear-in-dB Linear-in-dB
Noise Class Ultralow noise Ultralow noise Ultralow noise Ultralow noise Ultralow noise Ultralow noise
Primary Application Ultrasound and time-based variable gain control Ultrasound and time-based variable gain control Ultrasound and time-based variable gain control Ultrasound and time-based variable gain control Ultrasound and time-based variable gain control Ultrasound and time-based variable gain control
Production Status Production AD604 family listed as production AD604 family listed as production AD604 family listed as production AD604 family listed as production AD604 family listed as production

मुख्य विशेषताएँ

  • Dual-channel variable gain amplification in one package (बनामAD604ARSZ-RL)
  • Ultralow-noise gain control optimized for weak signals (बनामAD604ARSZ-R7)
  • Wide-bandwidth variable gain for instrumentation and receivers (बनामAD604ARS)

डिज़ाइन नोट्स

Route both analog channels using the symmetry shown in the manufacturer application circuit. Keep input, feedback, gain-control, and bypass connections short, and provide a low-impedance ground plane beneath the SSOP. High-value or fast gain-control nodes should remain away from clock, switching-regulator, and high-current return paths to prevent modulation of the linear-in-dB gain setting.

Treat each gain-control input as a sensitive control node. Use the manufacturer-recommended resistance and capacitance values, terminate unused control inputs as directed by the data sheet, and avoid long parallel traces that can couple noise or adjacent-channel activity into the gain command. Validate gain accuracy over the intended control-voltage range with the final ADC, clocking system, and analog front end installed.

Do not assume that AD604 order codes with different suffixes are interchangeable without checking the package drawing, temperature grade, and shipment format. AD604ARS, AD604ARSZ-RL, AD604ARSZ-R7, AD604ARS-REEL, and AD604ARSZ-R2 are same-family 24-lead SSOP alternatives, but the exact released BOM and assembly flow still govern approval. Confirm supply voltage, bypass capacitors, gain-control range, and output loading against Data Sheet Rev. G before substitution.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product listing includes a RoHS category, but no exact declaration text was available for the AD604ARSZ order code. The amplifier is not identified as an AEC-Q100-qualified automotive device.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ad604arsz ssop-24 adi AD604ARSZ datasheet AD604ARSZ datasheet pdf AD604ARSZ pinout AD604ARSZ equivalent AD604ARSZ replacement AD604ARSZ cross reference AD604ARSZ vs AD604ARS AD604ARSZ price AD604ARSZ stock Analog Devices AD604ARSZ AD604ARSZ ultrasound amplifier AD604ARSZ variable gain amplifier AD604ARSZ SSOP-24 footprint

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD604ARSZ AD604ARS AD604ARSZ-RL AD604ARSZ-R7 AD604ARS-REEL AD604ARSZ-R2 variable gain amplifier VGA dual-channel amplifier linear-in-dB gain control ultralow noise wide bandwidth time-based variable gain control ultrasound receiver medical imaging precision signal acquisition test and measurement communications receiver SSOP-24 SSOP package family surface-mount package semiconductor analog signal chain gain-control slope
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें