AD604ARSZ - Dual Ultralow Noise VGA | Analog Devices
부품 번호: AD604ARSZ ✓ 활성AD604ARSZ 개요
A variable gain amplifier, or VGA, is a special-purpose amplifier that changes signal gain under electronic control while preserving the operating characteristics needed for precision signal processing. The VGA belongs to the amplifier-IC hierarchy and ultimately supports broader analog signal-chain, measurement, medical-imaging, and communication systems. Unlike a fixed-gain amplifier, a VGA allows receiver gain to be adjusted without changing the underlying signal path or requiring multiple discrete gain stages.
The AD604's principal differentiator is its combination of two independently controlled channels, ultralow noise, accurate linear-in-dB gain behavior, and broad bandwidth. This combination is useful when a system must recover signals spanning a wide input amplitude range without adding excessive circuit complexity. The dual-channel arrangement can also reduce board area in systems that need matched amplification paths, particularly when the two channels process related or simultaneous signals.
According to the Analog Devices product page, the AD604 is optimized for ultrasound applications that use time-based gain control, although its low-noise characteristics make it suitable for any application requiring variable gain and wide bandwidth. A typical ultrasound receiver can vary gain as returning echoes become weaker with depth. The AD604 provides a controlled way to maintain useful signal amplitude through the receiver chain while keeping gain settings predictable in decibels.
Potential uses include ultrasound diagnostic imaging, medical instrumentation, precision signal acquisition, communications receivers, test and measurement equipment, and industrial imaging. In each case, the system designer should confirm the required gain range, gain-control slope, bandwidth, input noise, output swing, supply voltage, and pin-compatible configuration against the manufacturer data sheet before finalizing the circuit.
PCB design should preserve short, low-noise signal paths and keep the gain-control inputs away from high-current switching nodes. Because the amplifier is intended for low-noise signal chains, stable reference and supply bypassing, careful grounding, and controlled layout around both channels are essential. Use the manufacturer pin-description table and recommended application circuit when assigning traces and selecting external components.
This page combines manufacturer product information, packaging identification, sourcing guidance, drop-in family comparisons, and practical design considerations for engineers evaluating the AD604ARSZ. It also distinguishes the electrically identical order-code variants that matter when transferring a validated ultrasound or precision-amplifier design between tube, reel, and production-order configurations.
드롭인 대체품: AD604ARSZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD604ARSZ (동일 폼 팩터 및 풋프린트) — 차이점: Product Type.
AD604ARS
✅ 드롭인가격 문의
데이터시트 보기 →AD604ARSZ-RL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD604ARSZ-R7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD604ARS-REEL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD604ARSZ-R2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD604ARSZ 최대 정격 & 전기적 특성
| Product Type | Dual-channel variable gain amplifier |
| Number of Circuits | 2 circuits |
| Gain Control | Linear-in-dB variable gain control |
| Noise Performance | Ultralow noise |
| Primary Optimization | Time-based variable gain control for ultrasound applications |
| 패키지 | 24-lead SSOP |
| 실장 유형 | Surface mount |
AD604ARSZ 24-lead ssop 핀 구성 가이드
AD604ARSZ(24-lead ssop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AD604ARSZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD604ARSZ 적합 용도: 6 애플리케이션s: Ultrasound Diagnostic Receiver, Medical Imaging Signal Chain, Precision Communications Receiver, Industrial Test and Measurement, Precision Signal Acquisition, Wide-Bandwidth Analog Receiver.
Ultrasound Diagnostic Receiver
The AD604ARSZ fits ultrasound receiver front ends because it is optimized for time-based variable gain control and provides two low-noise amplifier channels. Echo strength changes with tissue depth and return time, so the receiver must adjust gain while maintaining predictable linear-in-dB behavior. The dual-channel architecture can support two acquisition paths while conserving board area. According to the AD604 manufacturer page, the amplifier is intended for ultrasound applications but remains suitable for other low-noise, wide-bandwidth systems. Before layout release, verify the required gain range, control slope, bandwidth, supply voltage, and output swing in Data Sheet Rev. G.
추천
Medical Imaging Signal Chain
The AD604ARSZ is applicable to medical imaging front ends where weak sensor signals must be amplified without adding excessive circuit noise. Its ultralow-noise dual-channel architecture supports simultaneous or closely related signal paths, while linear-in-dB gain control provides a predictable relationship between control voltage and attenuation or gain. This is valuable when receiver amplitude varies over a broad dynamic range. The same-family AD604ARS order code can support laboratory evaluation, but production selection must follow the confirmed suffix, temperature grade, and 24-lead SSOP package requirements.
추천
Precision Communications Receiver
The AD604ARSZ can serve as the variable-gain element in a precision receiver when signal strength changes with distance, channel conditions, or transmitted power. Linear-in-dB control simplifies system-level gain planning because engineers can express attenuation or amplification directly in decibels. Its dual-channel organization is useful for architectures that compare, mix, or monitor related baseband signals. The wide-bandwidth positioning described by Analog Devices supports broader receiver use, but designers should confirm noise density, stable gain-control behavior, supply headroom, and output drive against the exact data sheet before layout.
추천
Industrial Test and Measurement
The AD604ARSZ is suitable for test and measurement front ends that must adapt to a wide range of input amplitudes while maintaining low noise. A variable gain stage can reduce the required number of fixed attenuator and amplifier sections, improving signal-chain flexibility. Its two channels allow a single package to implement matched gain paths for a measurement input and a reference or monitor signal. Application engineers should pay particular attention to gain-control linearity, bandwidth, output swing, and bypass stability. The AD604ARS family provides related order codes for laboratory prototypes and production configurations.
추천
Precision Signal Acquisition
The AD604ARSZ can be used in precision acquisition systems where the source amplitude varies but the measurement chain must retain useful dynamic range. Its ultralow-noise characteristic is valuable when small signals pass through multiple analog stages, and the linear-in-dB control model simplifies calibration tables and software control. The dual-channel arrangement may also support differential or multi-node acquisition when the two paths are configured appropriately. Confirm common-mode range, supply voltage, gain-control limits, and channel matching in the manufacturer documentation before selecting component tolerances or external filtering.
추천
Wide-Bandwidth Analog Receiver
The AD604ARSZ fits wide-bandwidth analog receiver designs requiring electronic gain adjustment rather than a fixed gain path. Analog Devices describes the AD604 as suitable for any application requiring low noise, wide bandwidth, and variable gain, beyond its primary ultrasound focus. This makes it relevant to instrumentation and communication receivers where programmable attenuation must follow changing signal levels. PCB implementation should minimize parasitic capacitance at high-speed control and signal nodes, maintain short ground returns, and preserve the manufacturer bypass recommendations. Numerical bandwidth and slew-rate limits must be taken directly from Data Sheet Rev. G.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD604ARSZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD604ARS | AD604ARSZ-RL | AD604ARSZ-R7 | AD604ARS-REEL | AD604ARSZ-R2 |
|---|---|---|---|---|---|---|
| Package | 24-lead SSOP | 24-lead SSOP | 24-lead SSOP | 24-lead SSOP | 24-lead SSOP | 24-lead SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Type | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Gain Control | Linear-in-dB | Linear-in-dB | Linear-in-dB | Linear-in-dB | Linear-in-dB | Linear-in-dB |
| Noise Class | Ultralow noise | Ultralow noise | Ultralow noise | Ultralow noise | Ultralow noise | Ultralow noise |
| Primary Application | Ultrasound and time-based variable gain control | Ultrasound and time-based variable gain control | Ultrasound and time-based variable gain control | Ultrasound and time-based variable gain control | Ultrasound and time-based variable gain control | Ultrasound and time-based variable gain control |
| Production Status | Production | AD604 family listed as production | AD604 family listed as production | AD604 family listed as production | AD604 family listed as production | AD604 family listed as production |
주요 차별점
- Dual-channel variable gain amplification in one package (vs AD604ARSZ-RL)
- Ultralow-noise gain control optimized for weak signals (vs AD604ARSZ-R7)
- Wide-bandwidth variable gain for instrumentation and receivers (vs AD604ARS)
설계 노트
Route both analog channels using the symmetry shown in the manufacturer application circuit. Keep input, feedback, gain-control, and bypass connections short, and provide a low-impedance ground plane beneath the SSOP. High-value or fast gain-control nodes should remain away from clock, switching-regulator, and high-current return paths to prevent modulation of the linear-in-dB gain setting.
Treat each gain-control input as a sensitive control node. Use the manufacturer-recommended resistance and capacitance values, terminate unused control inputs as directed by the data sheet, and avoid long parallel traces that can couple noise or adjacent-channel activity into the gain command. Validate gain accuracy over the intended control-voltage range with the final ADC, clocking system, and analog front end installed.
Do not assume that AD604 order codes with different suffixes are interchangeable without checking the package drawing, temperature grade, and shipment format. AD604ARS, AD604ARSZ-RL, AD604ARSZ-R7, AD604ARS-REEL, and AD604ARSZ-R2 are same-family 24-lead SSOP alternatives, but the exact released BOM and assembly flow still govern approval. Confirm supply voltage, bypass capacitors, gain-control range, and output loading against Data Sheet Rev. G before substitution.
규정 준수 정보
The product listing includes a RoHS category, but no exact declaration text was available for the AD604ARSZ order code. The amplifier is not identified as an AEC-Q100-qualified automotive device.