AD826AR - Dual 50 MHz High-Speed Op Amp | Analog Devices
MPN: AD826AR ✓ सक्रियAD826AR अवलोकन
A voltage-feedback operational amplifier is an analog signal-conditioning IC that uses negative feedback to amplify a difference between two input voltages. Positioned within the broader voltage-amplifier and signal-processing hierarchy, the AD826AR provides wide closed-loop bandwidth, rapid slew rate, and sufficient output-current capability for high-speed analog paths. It is designed for applications in which unity-gain operation must remain stable without external compensation.
The AD826AR's principal features include 50 MHz unity-gain bandwidth, 350 V/us slew rate, 70 ns settling time to 0.01%, and low input offset voltage of 2 mV maximum. Each amplifier draws at most 7.5 mA of supply current. The dual configuration reduces package count when two independent high-speed channels are required, while also supporting differential signal paths when the two amplifiers are connected as a driver and receiver.
The device is specified for single +5 V operation and dual +5 V to +/-15 V operation. This operating range allows its use in legacy analog systems as well as lower-voltage designs where a positive supply and a negative rail are available. Its voltage-feedback architecture provides a practical balance between bandwidth, output-drive capability, power consumption, and implementation simplicity. The manufacturer also identifies ADC/DAC buffering and active filtering as important data-acquisition applications.
Typical uses include composite video and CATV signal conditioning, copier and scanner analog channels, LCD interface circuitry, image-scanner front ends, and high-speed instrumentation. The AD826AR is especially useful where a source has appreciable capacitance, because its output stage is designed to drive unlimited capacitive loads while maintaining stable operation at unity gain.
When laying out the circuit, use short, direct signal paths and provide a low-impedance return for each power pin. Decoupling capacitors should be placed immediately beside the device to suppress supply ripple and prevent high-frequency feedback through board traces. Confirm output swing, input common-mode range, load current, and capacitive-load stability against the operating conditions before using the amplifier with unusual loads.
This product page combines the AD826AR's principal performance figures, package information, application guidance, and replacement analysis into an engineering-oriented selection reference. It also distinguishes exact drop-in choices from packaging-only order codes, helping designers preserve the 8-pin SOIC footprint while avoiding unnecessary substitutions.
के लिए ड्रॉप-इन विकल्प AD826AR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
AD826ARZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
AD826AR Maximum Ratings और Electrical Characteristics
| Amplifier Type | Dual voltage-feedback operational amplifier |
| Number of Amplifiers | 2 circuits |
| Unity-Gain Bandwidth | 50 MHz |
| Slew Rate | 350 V/us |
| Settling Time | 70 ns to 0.01% |
| Maximum Supply Current per Amplifier | 7.5 mA |
| Minimum Output Current per Amplifier | 50 mA |
| Input Offset Voltage | 2 mV maximum |
| Single-Supply Operation | +5 V |
| Dual-Supply Operation | +/-15 V |
| Maximum Total Supply Voltage | 36 V |
| Unity-Gain Stability | Stable |
| Capacitive Load Drive | Unlimited capacitive loads |
| पैकेज | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount |
AD826AR 8-pin soic पिन कॉन्फ़िगरेशन गाइड
AD826AR (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD826AR.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AD826AR के लिए उपयुक्त है 6 अनुप्रयोगs: Composite Video Signal Conditioning, CATV Cable Driver, ADC Front-End Buffer, DAC Output Buffer, Active Analog Filter, Scanner and Image Acquisition.
Composite Video Signal Conditioning
The AD826AR fits video conditioning because its 50 MHz unity-gain bandwidth and 350 V/us slew rate preserve rapidly changing video transitions while maintaining stable operation at unity gain. In a composite-video buffer, each channel can follow source impedance and drive a terminated cable with at least 50 mA of output-current capability. The dual 8-pin SOIC arrangement reduces board area when two video signals require conditioning. Check the external sync, blanking, and level-shift requirements separately because the amplifier improves drive and isolation rather than performing video encoding.
अनुशंसित
CATV Cable Driver
The AD826AR is appropriate for CATV cable-driving stages that require more bandwidth than a general-purpose operational amplifier. Its 50 MHz unity-gain bandwidth accommodates wideband signals, while its 350 V/us slew rate supports large-amplitude transitions without immediately limiting rise time. The output stage provides at least 50 mA per amplifier, helping drive terminated cable loads and downstream capacitance. Place the amplifier close to the connector, maintain short feedback traces, and include suitable source and termination resistors to control reflections and maintain signal integrity.
अनुशंसित
ADC Front-End Buffer
The AD826AR can serve as a high-speed buffer between an analog source and a sampling ADC, particularly when the converter requires rapid settling and low driver impedance. The amplifier's 70 ns settling time to 0.01% and 50 MHz bandwidth help reduce acquisition-window errors during high-rate conversions. Its unity-gain stability simplifies direct implementation, and the 350 V/us slew rate improves response to full-scale transitions. Validate the ADC input range against the amplifier's input common-mode and output-swing limits, and place any isolation resistor close to the ADC input where it will not add excessive uncorrected settling time.
अनुशंसित
DAC Output Buffer
The AD826AR works well as a DAC output buffer when a converter needs isolation from an external load or a higher-current drive capability. Its 50 MHz bandwidth, 350 V/us slew rate, and 70 ns settling time preserve fast transitions in demanding data-conversion paths. The dual amplifier can buffer two related channels or form other signal-conditioning stages when the DAC interface requires balanced drive. Confirm the DAC output range against the amplifier's common-mode and swing limits, and account for the amplifier offset voltage of 2 mV maximum when it contributes materially to system accuracy.
अनुशंसित
Active Analog Filter
The AD826AR is suitable for active filtering in data-acquisition systems where closed-loop bandwidth must remain high over the signal range. Its unity-gain stability supports straightforward amplifier-based filter stages, while the 350 V/us slew rate limits large-signal distortion when the filter handles rapid input transitions. The 50 MHz bandwidth leaves design margin above lower-frequency passbands and helps control the response of active elements. Component tolerances and the complete filter transfer function should be simulated with the amplifier's actual output-drive and load conditions, especially when driving long cables or sampling networks.
अनुशंसित
Scanner and Image Acquisition
The AD826AR fits scanner and image-acquisition front ends that combine wide bandwidth with the drive required by sampled sensor outputs. Its 50 MHz unity-gain bandwidth supports high-rate analog signals, and the 70 ns settling time allows successive channel transitions to settle rapidly. The dual amplifier can process two channels in one 8-pin SOIC, helping reduce board area in multichannel imaging equipment. Layout should keep sensor, amplifier, and converter paths short, with separate high-frequency bypassing at the supply pins and careful grounding around the high-speed return currents.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा AD826AR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | AD826ARZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC - same package |
| Amplifier Configuration | Dual voltage-feedback operational amplifier | Dual voltage-feedback operational amplifier |
| Unity-Gain Bandwidth | 50 MHz | 50 MHz |
| Slew Rate | 350 V/us | 350 V/us |
| Settling Time | 70 ns to 0.01% | 70 ns to 0.01% |
| Maximum Supply Current per Amplifier | 7.5 mA | 7.5 mA |
| Minimum Output Current per Amplifier | 50 mA | 50 mA |
| Input Offset Voltage | 2 mV maximum | 2 mV maximum |
| Supply Range | +5 V single or +5 V to +/-15 V dual | +5 V single or +5 V to +/-15 V dual |
मुख्य विशेषताएँ
- High-speed performance combines wide bandwidth and rapid slew rate (बनामAD826ARZ)
- Fast precision settling supports data-conversion signal paths (बनामAD826ARZ)
- Strong output drive supports cable and capacitive-load buffering (बनामAD826ARZ)
- Low maximum supply current suits dual-channel analog systems (बनामAD826ARZ)
डिज़ाइन नोट्स
Route input, feedback, and output traces as short and direct as practical. High-speed feedback loops are especially sensitive to parasitic capacitance and trace inductance, so keep the feedback components close to the amplifier pins and avoid routing sensitive nodes beneath unrelated digital or switching paths. For cable-driving circuits, terminate the line correctly and place the amplifier close to the connector to minimize board-trace attenuation and reflections.
Place high-frequency decoupling capacitors immediately adjacent to the supply and ground pins. The AD826AR operates from a single +5 V supply or dual +5 V to +/-15 V rails, so each configured rail must remain within its specified range. Avoid sharing long return paths with high-current switching circuits. If the amplifier drives capacitive loads, verify startup behavior and stability rather than relying only on the quoted bandwidth and slew-rate figures.
Do not treat the 50 MHz unity-gain bandwidth as permission to use arbitrary closed-loop gains without checking stability. The AD826AR is specified for unity-gain stability, while noise gain can increase sensitivity to parasitic capacitance at higher gain. Also account for the maximum input offset voltage of 2 mV in precision signal paths. Confirm input common-mode range, output swing, and external load limits for each operating condition.
Use source and termination resistors to match the intended cable impedance and control ringing, particularly when driving long lines. The amplifier's capability to drive unlimited capacitive loads supports robust output behavior, but board parasitics, connector inductance, and load impedance still affect the complete channel. Probe the output with a short ground connection and evaluate overshoot, settling, and pulse fidelity at the required signal bandwidth.
अनुपालन जानकारी
No specific RoHS, REACH, halogen-free, lead-free, or conflict-minerals status was identified for this ordering code. The AD826AR is an operational amplifier and is not presented as an AEC-Q100-qualified automotive part.