Analog Devices

AD826AR - Dual 50 MHz High-Speed Op Amp | Analog Devices

N.º de pieza: AD826AR ✓ Activo
7.5 mA Vdss 50 mA Id 8-pin SOIC Package
MOQ: 1 |

AD826AR Descripción general

Analog Devices AD826AR is a dual, high-speed voltage-feedback operational amplifier with 50 MHz unity-gain bandwidth, 350 V/us slew rate, and a 70 ns settling time to 0.01%. The device is supplied in an 8-pin SOIC package and combines two amplifiers with a maximum supply current of 7.5 mA per amplifier. Its unity-gain stability and high output-drive capability make it suitable for video, CATV, data acquisition, active filtering, ADC/DAC buffering, and cable-driving circuits.

A voltage-feedback operational amplifier is an analog signal-conditioning IC that uses negative feedback to amplify a difference between two input voltages. Positioned within the broader voltage-amplifier and signal-processing hierarchy, the AD826AR provides wide closed-loop bandwidth, rapid slew rate, and sufficient output-current capability for high-speed analog paths. It is designed for applications in which unity-gain operation must remain stable without external compensation.

The AD826AR's principal features include 50 MHz unity-gain bandwidth, 350 V/us slew rate, 70 ns settling time to 0.01%, and low input offset voltage of 2 mV maximum. Each amplifier draws at most 7.5 mA of supply current. The dual configuration reduces package count when two independent high-speed channels are required, while also supporting differential signal paths when the two amplifiers are connected as a driver and receiver.

The device is specified for single +5 V operation and dual +5 V to +/-15 V operation. This operating range allows its use in legacy analog systems as well as lower-voltage designs where a positive supply and a negative rail are available. Its voltage-feedback architecture provides a practical balance between bandwidth, output-drive capability, power consumption, and implementation simplicity. The manufacturer also identifies ADC/DAC buffering and active filtering as important data-acquisition applications.

Typical uses include composite video and CATV signal conditioning, copier and scanner analog channels, LCD interface circuitry, image-scanner front ends, and high-speed instrumentation. The AD826AR is especially useful where a source has appreciable capacitance, because its output stage is designed to drive unlimited capacitive loads while maintaining stable operation at unity gain.

When laying out the circuit, use short, direct signal paths and provide a low-impedance return for each power pin. Decoupling capacitors should be placed immediately beside the device to suppress supply ripple and prevent high-frequency feedback through board traces. Confirm output swing, input common-mode range, load current, and capacitive-load stability against the operating conditions before using the amplifier with unusual loads.

This product page combines the AD826AR's principal performance figures, package information, application guidance, and replacement analysis into an engineering-oriented selection reference. It also distinguishes exact drop-in choices from packaging-only order codes, helping designers preserve the 8-pin SOIC footprint while avoiding unnecessary substitutions.

Alternativas directas para AD826AR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

AD826ARZ

✅ Sustitución directa
📦 8-pin SOIC
Same AD826 family, 8-pin SOIC, 50 MHz bandwidth, and 350 V/us slew rate; ordering suffix differs by up to 0% in stated key electrical ratings

📋 Alternativa de referencia (no en el catálogo)

AD826AR Valores máximos y características eléctricas

Amplifier Type Dual voltage-feedback operational amplifier
Number of Amplifiers 2 circuits
Unity-Gain Bandwidth 50 MHz
Slew Rate 350 V/us
Settling Time 70 ns to 0.01%
Maximum Supply Current per Amplifier 7.5 mA
Minimum Output Current per Amplifier 50 mA
Input Offset Voltage 2 mV maximum
Single-Supply Operation +5 V
Dual-Supply Operation +/-15 V
Maximum Total Supply Voltage 36 V
Unity-Gain Stability Stable
Capacitive Load Drive Unlimited capacitive loads
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount

Guía de configuración de pines de AD826AR 8-pin soic

Configuración de pines para AD826AR (encapsulado 8-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin soic para AD826AR

No hay datos detallados de patillaje disponibles para AD826AR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD826AR es adecuado para 6 aplicacións: Composite Video Signal Conditioning, CATV Cable Driver, ADC Front-End Buffer, DAC Output Buffer, Active Analog Filter, Scanner and Image Acquisition.

📺

Composite Video Signal Conditioning

The AD826AR fits video conditioning because its 50 MHz unity-gain bandwidth and 350 V/us slew rate preserve rapidly changing video transitions while maintaining stable operation at unity gain. In a composite-video buffer, each channel can follow source impedance and drive a terminated cable with at least 50 mA of output-current capability. The dual 8-pin SOIC arrangement reduces board area when two video signals require conditioning. Check the external sync, blanking, and level-shift requirements separately because the amplifier improves drive and isolation rather than performing video encoding.

🌐

CATV Cable Driver

The AD826AR is appropriate for CATV cable-driving stages that require more bandwidth than a general-purpose operational amplifier. Its 50 MHz unity-gain bandwidth accommodates wideband signals, while its 350 V/us slew rate supports large-amplitude transitions without immediately limiting rise time. The output stage provides at least 50 mA per amplifier, helping drive terminated cable loads and downstream capacitance. Place the amplifier close to the connector, maintain short feedback traces, and include suitable source and termination resistors to control reflections and maintain signal integrity.

📊

ADC Front-End Buffer

The AD826AR can serve as a high-speed buffer between an analog source and a sampling ADC, particularly when the converter requires rapid settling and low driver impedance. The amplifier's 70 ns settling time to 0.01% and 50 MHz bandwidth help reduce acquisition-window errors during high-rate conversions. Its unity-gain stability simplifies direct implementation, and the 350 V/us slew rate improves response to full-scale transitions. Validate the ADC input range against the amplifier's input common-mode and output-swing limits, and place any isolation resistor close to the ADC input where it will not add excessive uncorrected settling time.

🔧

DAC Output Buffer

The AD826AR works well as a DAC output buffer when a converter needs isolation from an external load or a higher-current drive capability. Its 50 MHz bandwidth, 350 V/us slew rate, and 70 ns settling time preserve fast transitions in demanding data-conversion paths. The dual amplifier can buffer two related channels or form other signal-conditioning stages when the DAC interface requires balanced drive. Confirm the DAC output range against the amplifier's common-mode and swing limits, and account for the amplifier offset voltage of 2 mV maximum when it contributes materially to system accuracy.

🎛️

Active Analog Filter

The AD826AR is suitable for active filtering in data-acquisition systems where closed-loop bandwidth must remain high over the signal range. Its unity-gain stability supports straightforward amplifier-based filter stages, while the 350 V/us slew rate limits large-signal distortion when the filter handles rapid input transitions. The 50 MHz bandwidth leaves design margin above lower-frequency passbands and helps control the response of active elements. Component tolerances and the complete filter transfer function should be simulated with the amplifier's actual output-drive and load conditions, especially when driving long cables or sampling networks.

🖼️

Scanner and Image Acquisition

The AD826AR fits scanner and image-acquisition front ends that combine wide bandwidth with the drive required by sampled sensor outputs. Its 50 MHz unity-gain bandwidth supports high-rate analog signals, and the 70 ns settling time allows successive channel transitions to settle rapidly. The dual amplifier can process two channels in one 8-pin SOIC, helping reduce board area in multichannel imaging equipment. Layout should keep sensor, amplifier, and converter paths short, with separate high-frequency bypassing at the supply pins and careful grounding around the high-speed return currents.

Resumen de productos recomendados

AD826AR Analog Devices Se usa en: Composite Video Signal Conditioning, CATV Cable Driver, ADC Front-End Buffer, DAC Output Buffer, Active Analog Filter, Scanner and Image Acquisition AD826ARZ Same-family SOIC sourcing option Se usa en: Composite Video Signal Conditioning, CATV Cable Driver, ADC Front-End Buffer, DAC Output Buffer, Active Analog Filter, Scanner and Image Acquisition
What are the key specifications of AD826AR that engineers should know?
The AD826AR is a dual, unity-gain-stable voltage-feedback operational amplifier with 50 MHz unity-gain bandwidth, 350 V/us slew rate, and 70 ns settling time to 0.01%. Each amplifier draws no more than 7.5 mA and can deliver at least 50 mA of output current. According to the Analog Devices AD826 datasheet, the device is packaged in an 8-pin SOIC and operates from a single +5 V supply or dual +5 V to +/-15 V supplies.
What is the operating voltage of AD826AR?
The AD826AR operates from a single +5 V supply or from dual supplies ranging from +5 V to +/-15 V. The manufacturer fully specifies the amplifier across that range, including operation with a total supply span of up to 36 V. According to the Analog Devices AD826 datasheet, dual-supply operation is useful in data-acquisition systems that already provide positive and negative rails.
Where can I download the AD826AR datasheet PDF?
The official AD826AR datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ad826.pdf. It describes the AD826 family's dual amplifier architecture, 50 MHz bandwidth, 350 V/us slew rate, 70 ns settling time, electrical characteristics, and application information. The AD826AR ordering option is the 8-pin SOIC version.
What is the AD826AR used for in high-speed analog circuits?
The AD826AR is used where a dual high-speed voltage-feedback amplifier must preserve signal amplitude and settle rapidly. Its 50 MHz unity-gain bandwidth and 350 V/us slew rate support video, CATV, copier, scanner, LCD, image-acquisition, ADC/DAC buffering, active-filter, and cable-driving circuits. According to the Analog Devices AD826 datasheet, unity-gain stability and high output-drive capability are central features for these applications.
Can the AD826AR drive capacitive loads?
Yes, the AD826AR is designed to drive unlimited capacitive loads. This makes it useful for buffering cables, converters, scanners, and other loads that may introduce significant capacitance. According to the Analog Devices AD826 datasheet, each amplifier can source or sink at least 50 mA. The output stage still requires careful PCB layout and short feedback paths for best high-frequency behavior.
What is the AD826AR settling time and why does it matter?
The AD826AR settles to within 0.01% of its final output in 70 ns. This specification is important in data-acquisition systems because it defines how quickly the amplifier converges after a large-amplitude input step. According to the Analog Devices AD826 datasheet, the device combines this settling performance with 50 MHz unity-gain bandwidth and a 350 V/us slew rate.
Where to buy AD826AR online and what is the current price?
AD826AR ordering information and a quotation request are available through the Request a Quote form on this page. Current unit pricing and quantity availability can change, so the form is the appropriate route for a current purchase. The AD826AR is the Analog Devices dual high-speed operational amplifier in an 8-pin SOIC package with 50 MHz bandwidth.
What is the lead time and stock status for AD826AR?
Current lead time, stock, and minimum-order details should be requested through the Request a Quote form on this page. Analog Devices identifies the AD826 family as being in production, but current channel availability may vary by order quantity and package code. The AD826AR is the 8-pin SOIC ordering option with two high-speed voltage-feedback amplifiers.
Is AD826AR in stock for an 8-pin SOIC design?
Use the Request a Quote form on this page to request the current AD826AR inventory position and an orderable quantity. Stock levels are time-sensitive and should not be inferred from general product listings. The target AD826AR is an 8-pin SOIC dual op amp rated by the manufacturer for 50 MHz unity-gain bandwidth and 350 V/us slew rate.
What is the best drop-in replacement for AD826AR?
AD826ARZ is the closest listed same-package alternative because it retains the AD826 family's 8-pin SOIC interface and dual high-speed amplifier configuration. Exact sourcing and temperature-grade requirements should still be checked before substitution. The Alternatives Cross-Reference Data did not identify five technically distinct drop-in devices, so packaging-only order codes were not padded into the list.
Can AD826ARZ replace AD826AR without changing the PCB?
AD826ARZ can be considered for an AD826AR board because it uses the same 8-pin SOIC package and belongs to the same AD826 family. The Analog Devices AD826 family documentation supports the shared electrical architecture, but production-status, temperature-grade, and ordering-code differences must be confirmed for the intended assembly. No board change is expected when the selected suffix meets those requirements.
When should I choose AD826AR instead of AD826ARZ?
Choose AD826AR when it is the approved ordering code for the required temperature grade, production configuration, and package arrangement. Choose AD826ARZ when that ordering option satisfies the same electrical and environmental requirements while providing an appropriate sourcing path. Both are 8-pin SOIC members of the AD826 dual, 50 MHz voltage-feedback operational amplifier family.
Is AD826AR suitable for ADC and DAC buffering?
The AD826AR is suitable for ADC and DAC buffering because it combines high bandwidth, fast settling, and strong output-drive capability. According to the Analog Devices AD826 datasheet, the amplifier excels as an ADC/DAC buffer and active filter in data-acquisition systems. Its 50 MHz bandwidth, 350 V/us slew rate, and 70 ns settling time support these signal-chain roles.
Is there a high-speed op amp equivalent to AD826AR from another manufacturer?
No cross-manufacturer equivalent with verified pin compatibility and sufficient parametric equivalence was established in the Alternatives Cross-Reference Data for the AD826AR. Because high-speed op amps can differ in stability, output drive, slew rate, and pin configuration, a generic nearest-equivalent search is not enough for drop-in use. Request a Quote on this page when qualified sourcing for AD826AR is required.
What is the difference between AD826AR and AD826ARZ?
Both are order codes associated with the Analog Devices AD826 dual high-speed voltage-feedback operational amplifier family in an 8-pin SOIC package. The principal family-level performance remains 50 MHz unity-gain bandwidth, 350 V/us slew rate, and 70 ns settling time to 0.01%. The ordering suffix should be selected according to the required temperature grade, qualification, and order configuration.

Datos de referencia de ingeniería para AD826AR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose AD826AR when the design specifically calls for Analog Devices' dual, unity-gain-stable AD826 amplifier in an 8-pin SOIC and the selected ordering code satisfies the required production and environmental conditions. Its 50 MHz bandwidth, 350 V/us slew rate, 70 ns settling time, and at least 50 mA output current suit video, CATV, ADC/DAC buffering, active filters, and cable-driving circuits. AD826ARZ is the closest listed drop-in alternative because it retains the same family, package, and principal electrical ratings; select it when its ordering configuration better matches procurement or qualification requirements. No cross-manufacturer drop-in part was established without verified pin and parametric data, so do not substitute a generic high-speed dual amplifier solely from bandwidth. For designs using gains other than unity, verify stability and noise gain; for capacitive or long-cable loads, verify the complete output network and PCB layout.

Comparación con alternativas

Parámetro Este producto AD826ARZ
Brand Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same package
Amplifier Configuration Dual voltage-feedback operational amplifier Dual voltage-feedback operational amplifier
Unity-Gain Bandwidth 50 MHz 50 MHz
Slew Rate 350 V/us 350 V/us
Settling Time 70 ns to 0.01% 70 ns to 0.01%
Maximum Supply Current per Amplifier 7.5 mA 7.5 mA
Minimum Output Current per Amplifier 50 mA 50 mA
Input Offset Voltage 2 mV maximum 2 mV maximum
Supply Range +5 V single or +5 V to +/-15 V dual +5 V single or +5 V to +/-15 V dual

Diferenciadores clave

  • High-speed performance combines wide bandwidth and rapid slew rate (frente a AD826ARZ)
  • Fast precision settling supports data-conversion signal paths (frente a AD826ARZ)
  • Strong output drive supports cable and capacitive-load buffering (frente a AD826ARZ)
  • Low maximum supply current suits dual-channel analog systems (frente a AD826ARZ)

Notas de diseño

Route input, feedback, and output traces as short and direct as practical. High-speed feedback loops are especially sensitive to parasitic capacitance and trace inductance, so keep the feedback components close to the amplifier pins and avoid routing sensitive nodes beneath unrelated digital or switching paths. For cable-driving circuits, terminate the line correctly and place the amplifier close to the connector to minimize board-trace attenuation and reflections.

Place high-frequency decoupling capacitors immediately adjacent to the supply and ground pins. The AD826AR operates from a single +5 V supply or dual +5 V to +/-15 V rails, so each configured rail must remain within its specified range. Avoid sharing long return paths with high-current switching circuits. If the amplifier drives capacitive loads, verify startup behavior and stability rather than relying only on the quoted bandwidth and slew-rate figures.

Do not treat the 50 MHz unity-gain bandwidth as permission to use arbitrary closed-loop gains without checking stability. The AD826AR is specified for unity-gain stability, while noise gain can increase sensitivity to parasitic capacitance at higher gain. Also account for the maximum input offset voltage of 2 mV in precision signal paths. Confirm input common-mode range, output swing, and external load limits for each operating condition.

Use source and termination resistors to match the intended cable impedance and control ringing, particularly when driving long lines. The amplifier's capability to drive unlimited capacitive loads supports robust output behavior, but board parasitics, connector inductance, and load impedance still affect the complete channel. Probe the output with a short ground connection and evaluate overshoot, settling, and pulse fidelity at the required signal bandwidth.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No specific RoHS, REACH, halogen-free, lead-free, or conflict-minerals status was identified for this ordering code. The AD826AR is an operational amplifier and is not presented as an AEC-Q100-qualified automotive part.

Búsquedas relacionadas

ad826ar datasheet ad826ar datasheet pdf AD826AR datasheet AD826AR datasheet PDF AD826AR pinout AD826AR equivalent AD826AR replacement AD826AR cross reference AD826AR vs AD826ARZ AD826AR 50 MHz op amp AD826AR 8-SOIC AD826AR ADC buffer AD826AR price AD826AR stock Analog Devices AD826AR

Componentes & términos relacionados

Analog Devices AD826AR AD826ARZ AD826 dual operational amplifier voltage-feedback amplifier high-speed op amp analog signal conditioning unity-gain stability unity-gain bandwidth 50 MHz 350 V/us slew rate 70 ns settling time input offset voltage ADC/DAC buffer active filter CATV cable driver composite video 8-pin SOIC SOIC package family surface-mount package supply current output drive current capacitive load Analog Devices AD826 datasheet
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ