Analog Devices

AD9632ANZ - 250MHz High-Speed Op Amp | Analog Devices

MPN: AD9632ANZ ✓ सक्रिय
2 mV Vdss 2 µA Id 8-DIP (0.300 inch, 7.62 mm) Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD9632ANZ अवलोकन

Analog Devices AD9632ANZ is a single-circuit, voltage-feedback operational amplifier with a 250 MHz small-signal bandwidth, ultralow distortion, and stability at gain 2 or greater, housed in an 8-pin PDIP package. The device combines a 2 µA input bias current with a 2 mV input offset voltage and is specified for operation from -40°C to +85°C.

A high-speed voltage-feedback operational amplifier is a wide-bandwidth linear amplifier that uses negative feedback to control gain and signal integrity. Within the amplifier-IC hierarchy, it belongs to the voltage-feedback amplifier family and is used when a system needs accurate amplification of high-frequency analog signals without the current-feedback characteristics of a transimpedance amplifier.

The AD9632's principal features include a 250 MHz -3 dB bandwidth, gain-2 stability, and ultralow distortion. Voltage feedback is especially useful in broadband signal chains because the closed-loop response can be shaped by external feedback components. Its 8-pin PDIP construction also supports prototype and through-hole instrumentation designs, although production layouts should account for the package's relatively large footprint compared with surface-mount alternatives.

This amplifier uses a classical voltage-feedback architecture designed for exceptional settling time, bandwidth, and low distortion. According to the Analog Devices AD9632 Data Sheet, Rev. D, the AD9632 is stable at gains of 2 or greater. The AD9631 in the same family is unity-gain stable, while AD8037ANZ is identified as a 270 MHz, single-amplifier alternative, so stability configuration and gain requirements must be reviewed before substitution.

Typical uses include high-speed instrumentation, communications signal conditioning, pulse shaping, video or imaging front ends, active filtering, and data-acquisition circuits. A 250 MHz bandwidth makes the device suitable for signals whose useful spectral content lies well below that limit but requires rapid edge rates and low distortion.

When building a new design around the AD9632ANZ, begin with a gain of at least 2 and place bypass capacitors close to the supply pins. Keep feedback-loop components compact, terminate unused inputs according to the manufacturer's recommendations, and evaluate the complete layout because parasitic inductance and capacitance can materially affect the stability of a 250 MHz amplifier.

This page consolidates the manufacturer characteristics, package information, pricing references, candidate drop-in substitutions, and practical design considerations for engineers comparing the AD9632ANZ with nearby high-speed amplifier options.

के लिए ड्रॉप-इन विकल्प AD9632ANZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD9632ANZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.

AD9631ANZ

✅ ड्रॉप-इन
Analog Devices
📦 8-DIP (0.300 inch, 7.62 mm)
Voltage-feedback operational amplifier · 1 circuit · Unity-gain stable · 320 MHz · Voltage feedback · 8-pin PDIP · Through-hole

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD8037ANZ

✅ ड्रॉप-इन
📦 8-DIP (0.300 inch, 7.62 mm)
Bandwidth is 270 MHz versus 250 MHz, an 8% increase; supply range and offset voltage differ by

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD9632ANZ Maximum Ratings और Electrical Characteristics

Product Type Single voltage-feedback operational amplifier
Number of Circuits 1 circuit
-3 dB Bandwidth 250 MHz
Minimum Stable Gain 2
Input Bias Current 2 µA
Input Offset Voltage 2 mV
ऑपरेटिंग तापमान रेंज -40°C to +85°C
पैकेज 8-DIP (0.300 inch, 7.62 mm)
माउंटिंग स्टाइल Through hole
Packaging Tube
Architecture Voltage feedback
Distortion Ultralow distortion
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

AD9632ANZ 8-dip (0.300 inch, 7.62 mm) पिन कॉन्फ़िगरेशन गाइड

AD9632ANZ (8-dip (0.300 inch, 7.62 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD9632ANZ के लिए 8-dip (0.300 inch, 7.62 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD9632ANZ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD9632ANZ के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed Instrumentation Signal Conditioning, Communications Receiver Front End, Video and Imaging Analog Front End, Pulse Shaping and Fast Edge Conditioning, Active Filtering and Frequency Response Design, Data Acquisition and Analog-to-Digital Interface.

🏭

High-Speed Instrumentation Signal Conditioning

The AD9632ANZ fits broadband instrumentation because its 250 MHz -3 dB bandwidth preserves the amplitude and phase behavior of rapidly changing sensor or test signals. A voltage-feedback configuration operating at gain 2 or greater allows the feedback network to define the closed-loop response while maintaining low distortion. Place the feedback elements close to the amplifier pins, bypass the supply rails locally, and route the analog signal path away from digital switching nodes. The principal trade-off is that the device is not unity-gain stable, so a one-to-one signal path should use an amplifier specifically qualified for that gain.

🌐

Communications Receiver Front End

The AD9632ANZ can amplify intermediate-frequency or other communications signals whose bandwidth falls below its 250 MHz limit while requiring rapid edge handling and low distortion. Its 2 µA input bias current is helpful when the source impedance is high, and the 2 mV offset should be included in the receiver's dc-error budget. Use gain 2 or greater and keep feedback-loop area small to limit parasitic feedback. Verify the complete output swing and common-mode range against the Analog Devices AD9632 Data Sheet, Rev. D before fixing the front-end gain.

📺

Video and Imaging Analog Front End

The AD9632ANZ's 250 MHz bandwidth and ultralow distortion make it suitable for pre-processing video or image-sensor signals before conversion or sampling. The amplifier can operate as a fixed-gain stage because voltage-feedback amplifiers offer direct control of closed-loop gain with external resistors. Its minimum stable gain of 2 must be respected, and output-swing limits need to be checked for the intended signal amplitude. Short feedback traces, solid ground returns, and careful separation from clocks and converters are important at this bandwidth.

⚡

Pulse Shaping and Fast Edge Conditioning

The AD9632ANZ can condition narrow pulses or rapidly rising waveforms because its 250 MHz bandwidth supports high-frequency spectral content and its voltage-feedback architecture emphasizes settling behavior. A gain of at least 2 is required for stable operation, making the part more appropriate for pulse-amplification stages than for unity-gain buffers. Evaluate output-current demand and slew-rate limits against the pulse width and load. Short routing and local supply bypassing are essential for preserving pulse timing and limiting unintended overshoot or ringing.

🔧

Active Filtering and Frequency Response Design

The AD9632ANZ can implement active filter sections where the required signal bandwidth approaches 250 MHz and low distortion is important. Its voltage-feedback topology allows the response to be established by external feedback and loading networks, but component tolerances and parasitic inductance become increasingly important at these frequencies. Keep the gain above 2, use compact resistor and capacitor layouts, and use the manufacturer's recommended grounding and decoupling arrangement. Validate both magnitude and phase response on the final board because the physical implementation can differ materially from an ideal simulation.

🖥️

Data Acquisition and Analog-to-Digital Interface

The AD9632ANZ is appropriate as an analog gain stage ahead of a high-speed data converter when source signals require more bandwidth and lower distortion than the ADC's internal front end can provide. The amplifier's 250 MHz bandwidth gives design headroom for the converter's input bandwidth, while gain 2 or greater satisfies its stability requirement. The interface must be analyzed for settling, output swing, loading, and converter input capacitance. Keep the connection to the ADC short and use controlled impedance when long board traces are unavoidable.

अनुशंसित उत्पादों का सारांश

What is the AD9632ANZ and what is its key bandwidth?
The AD9632ANZ is a single voltage-feedback operational amplifier with a 250 MHz -3 dB bandwidth, ultralow distortion, and stability at gain 2 or greater. According to the Analog Devices AD9632 Data Sheet, Rev. D, the device is a bipolar high-speed amplifier offered in an 8-pin PDIP package. It is intended for high-frequency signal conditioning, instrumentation, communications, imaging, filtering, and data-acquisition circuits where fast settling and low distortion are important.
What is the minimum stable gain of the AD9632ANZ?
The AD9632ANZ is stable at gain 2 or greater. According to the Analog Devices AD9632 Data Sheet, Rev. D, this stability requirement distinguishes it from the AD9631, which is unity-gain stable. A circuit using the AD9632 should therefore be configured with a closed-loop gain of at least 2 unless the manufacturer provides a separate approved configuration. This restriction is essential when evaluating substitutions for the same PCB footprint.
What is the AD9632ANZ input offset voltage and bias current?
The AD9632ANZ has a listed input offset voltage of 2 mV and an input bias current of 2 µA. These characteristics come from the AD9632 component information and the Analog Devices product documentation. The low input bias current is useful when driving high-impedance sources, while the 2 mV offset must be included in error calculations for precision dc-coupled signal chains. The same characteristics should be compared directly when considering a replacement.
What package and mounting style does the AD9632ANZ use?
The AD9632ANZ uses an 8-DIP package measuring 0.300 inch, or 7.62 mm, across the lead span, and it is mounted through hole. The component listing identifies the package as 8-DIP and the orderable package as a tube. Because the AD9632ANZ is a through-hole device, a direct replacement must match the 8-pin DIP footprint rather than merely offer similar electrical performance.
Where can I download the AD9632ANZ datasheet PDF?
The official AD9632 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/ad9632.html. The page identifies the active product and links to the AD9632 Data Sheet, Rev. D. For the exact AD9632ANZ ordering information, use the manufacturer ordering guide and package options within that documentation. The AD9632ANZ is the PDIP package variant.
Where can I find the AD9632ANZ pinout?
The AD9632ANZ pin assignment should be taken from the pin-description table in the Analog Devices AD9632 Data Sheet, Rev. D, because the complete numbered pinout is not printed in the available product-page excerpt. The package is an 8-pin PDIP, but assigning PCB tracks should not be based only on a generic operational-amplifier diagram. Confirm pin numbers, power connections, balance pins, and any no-connect positions directly in the manufacturer datasheet.
Is AD9631ANZ a drop-in replacement for AD9632ANZ?
AD9631ANZ is a close same-family candidate because it is offered in an 8-DIP format and belongs to the AD9631/AD9632 high-speed amplifier family. However, the AD9631 is unity-gain stable whereas the AD9632 requires gain 2 or greater. The AD9631ANZ can therefore be considered for a gain-2-or-higher circuit after checking its electrical limits, but it must not be assumed suitable for a unity-gain AD9632 design without additional analysis.
Can AD8037ANZ replace AD9632ANZ on the same board?
AD8037ANZ is a candidate 8-DIP substitute because comparison information identifies it as a single 270 MHz operational amplifier, while the AD9632ANZ is a 250 MHz voltage-feedback device. Its bandwidth is 20 MHz, or 8%, higher than that of the AD9632ANZ. Final substitution still requires checking pin assignments, supply range, output swing, input offset, noise, stability, and distortion against the AD9632 Data Sheet, Rev. D.
When should I choose the AD9632ANZ over another high-speed amplifier?
Choose the AD9632ANZ when the design requires a single 8-DIP voltage-feedback amplifier, a 250 MHz -3 dB bandwidth, low distortion, and a stable closed-loop gain of at least 2. AD9631ANZ is appropriate when unity-gain stability is useful, while AD8037ANZ may be considered when its higher 270 MHz bandwidth and other electrical characteristics better match the signal chain. The selection should be based on the complete electrical specification and the existing PCB footprint.
Is the AD9632ANZ suitable for video and imaging signal chains?
The AD9632ANZ can suit video and imaging front ends because its 250 MHz bandwidth and low distortion support wideband analog amplification. The manufacturer identifies the device as an ultralow-distortion, high-speed voltage-feedback amplifier. Suitability depends on the required gain, source impedance, output swing, supply voltage, settling behavior, and noise budget. A unity-gain configuration is not appropriate because the AD9632 is stable only at gain 2 or greater.
What are the key specifications engineers should know about AD9632ANZ?
The key AD9632ANZ specifications are a 250 MHz -3 dB bandwidth, stability at gain 2 or greater, 2 µA input bias current, 2 mV input offset voltage, and an operating range of -40°C to +85°C. The device uses a single voltage-feedback circuit in an 8-DIP through-hole package. According to the Analog Devices AD9632 Data Sheet, Rev. D, its combination of bandwidth, settling behavior, and ultralow distortion supports demanding broadband signal-chain designs.
What can replace the AD9632ANZ?
The most defensible candidates in the available cross-reference information are AD9631ANZ and AD8037ANZ because both are associated with 8-pin DIP packages and comparable high-speed voltage-feedback operation. AD9631ANZ changes the stability configuration to unity-gain stable, while AD8037ANZ is identified as a 270 MHz single amplifier. Neither substitution should be released without a complete pinout, electrical-limit, and stability check against the manufacturer datasheet.
Is AD9632ANZ the same as AD9632ARZ?
No. AD9632ANZ is the 8-DIP package variant, while the AD9632 family also includes surface-mount orderable versions such as AD9632ARZ in an 8-pin SOIC package. Although the amplifier core may be related, the packages have different PCB footprints and interchangeability requires a board change. For a direct replacement in an existing AD9632ANZ design, the package must remain 8-DIP.
What is the best Analog Devices equivalent for AD9632ANZ?
AD9631ANZ is the closest same-manufacturer family candidate identified for an 8-DIP design, but it is unity-gain stable rather than gain-2 stable like the AD9632ANZ. It is therefore most relevant when the original circuit operates at gain 2 or higher and the remaining electrical characteristics match. For unity-gain service, select a device explicitly rated for unity-gain stability rather than treating AD9631ANZ as an automatic drop-in part.
Where can I buy AD9632ANZ and what is its lead time?
Use the Request a Quote form on this page to ask for AD9632ANZ availability, current lead time, minimum order quantity, and tube-packaging requirements. The Analog Devices product page lists the AD9632 as in production, while distributor pages identify the part but do not provide a qualifying quantity-break price table here. A manufacturing commitment should be based on a current quote and the approved source rather than a historical catalog figure.
What is the price of AD9632ANZ?
Submit an AD9632ANZ request through the Request a Quote form on this page for the current unit price, quantity breaks, stock position, and delivery schedule. The available manufacturer page shows a starting list price, but it does not present an eligible one-unit quantity-break table. Static pricing in technical descriptions can become stale, so the quote form provides the appropriate transaction channel for this exact 8-DIP ordering code.

के लिए इंजीनियरिंग संदर्भ डेटा AD9632ANZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AD9632ANZ for a single-channel, high-speed voltage-feedback design that uses an 8-DIP footprint, operates at gain 2 or greater, and prioritizes a 250 MHz bandwidth with ultralow distortion. AD9631ANZ is attractive when unity-gain stability is required or when the existing circuit operates above unity gain and its remaining specifications meet the design limits. AD8037ANZ is the more relevant alternative when its higher 270 MHz bandwidth is useful and its supply range, offset, noise, output swing, and stability behavior satisfy the application. Neither alternative should be treated as automatically interchangeable: verify the eight-pin assignments, supply requirements, common-mode and output ranges, settling, slew rate, distortion, and stability using the manufacturer datasheets. For an existing PCB, the 8-DIP footprint is mandatory; AD9632 surface-mount variants are not drop-in replacements.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD9631ANZ AD8037ANZ
Package 8-DIP (0.300 inch, 7.62 mm) 8-DIP 8-DIP
Brand Analog Devices Analog Devices Analog Devices
Number of Circuits 1 circuit 1 circuit 1 amplifier
Mounting Style Through hole Through hole Through hole
Special Feature Stable at gain 2 or greater Unity-gain stable Ultra-low distortion, stable

मुख्य विशेषताएँ

  • Gain-2 stability aligns with fixed-gain amplifier stages (बनामAD9631ANZ)
  • 250 MHz bandwidth with ultralow-distortion positioning (बनामAD8037ANZ)
  • Single-circuit 8-DIP implementation (बनामAD9631ANZ)

डिज़ाइन नोट्स

Do not configure the AD9632ANZ for unity gain. The manufacturer identifies the amplifier as stable at gain 2 or greater, while AD9631-family behavior differs in this respect. Confirm the intended closed-loop gain before layout release and verify that any feedback divider does not create a local condition that violates the manufacturer's recommended topology.

Treat the feedback network as part of the amplifier. Place feedback resistors and any compensation components close to the relevant pins, minimize the feedback-loop area, and route the high-frequency signal path away from clock, converter, and digital return currents. At a 250 MHz bandwidth, a theoretically acceptable schematic can become oscillatory or distort the intended response if PCB parasitics are not controlled.

Use short supply connections and place the manufacturer's recommended bypass capacitors immediately across the amplifier's supply pins. Keep the ground-return path continuous and connect it to the signal reference without long shared traces. Decoupling capacitance, ESR, placement, and the exact supply voltage must follow the AD9632 Data Sheet, Rev. D because the available excerpt does not provide a complete recommended-component table.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available manufacturer and distributor excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. The AD9632 is a production high-speed analog amplifier, but no AEC-Q100 qualification is identified.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD9632ANZ datasheet AD9632ANZ datasheet pdf AD9632ANZ pinout AD9632ANZ 250MHz amplifier AD9632ANZ equivalent AD9632ANZ replacement AD9632ANZ cross reference AD9632ANZ vs AD8037ANZ AD9632ANZ 8-DIP footprint AD9632ANZ application circuit Analog Devices AD9632ANZ AD9632ANZ price

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD9632ANZ AD9631ANZ AD8037ANZ voltage-feedback operational amplifier high-speed amplifier linear amplifier amplifier IC semiconductor negative feedback small-signal bandwidth input offset voltage input bias current gain-2 stability unity-gain stable ultralow distortion closed-loop gain settling time 8-DIP PDIP through-hole package instrumentation signal conditioning communications front end data acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें