AD9632ANZ - 250MHz High-Speed Op Amp | Analog Devices
料号: AD9632ANZ ✓ 量产中AD9632ANZ 概述
A high-speed voltage-feedback operational amplifier is a wide-bandwidth linear amplifier that uses negative feedback to control gain and signal integrity. Within the amplifier-IC hierarchy, it belongs to the voltage-feedback amplifier family and is used when a system needs accurate amplification of high-frequency analog signals without the current-feedback characteristics of a transimpedance amplifier.
The AD9632's principal features include a 250 MHz -3 dB bandwidth, gain-2 stability, and ultralow distortion. Voltage feedback is especially useful in broadband signal chains because the closed-loop response can be shaped by external feedback components. Its 8-pin PDIP construction also supports prototype and through-hole instrumentation designs, although production layouts should account for the package's relatively large footprint compared with surface-mount alternatives.
This amplifier uses a classical voltage-feedback architecture designed for exceptional settling time, bandwidth, and low distortion. According to the Analog Devices AD9632 Data Sheet, Rev. D, the AD9632 is stable at gains of 2 or greater. The AD9631 in the same family is unity-gain stable, while AD8037ANZ is identified as a 270 MHz, single-amplifier alternative, so stability configuration and gain requirements must be reviewed before substitution.
Typical uses include high-speed instrumentation, communications signal conditioning, pulse shaping, video or imaging front ends, active filtering, and data-acquisition circuits. A 250 MHz bandwidth makes the device suitable for signals whose useful spectral content lies well below that limit but requires rapid edge rates and low distortion.
When building a new design around the AD9632ANZ, begin with a gain of at least 2 and place bypass capacitors close to the supply pins. Keep feedback-loop components compact, terminate unused inputs according to the manufacturer's recommendations, and evaluate the complete layout because parasitic inductance and capacitance can materially affect the stability of a 250 MHz amplifier.
This page consolidates the manufacturer characteristics, package information, pricing references, candidate drop-in substitutions, and practical design considerations for engineers comparing the AD9632ANZ with nearby high-speed amplifier options.
直接替换替代料: AD9632ANZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AD9632ANZ (相同外形与封装尺寸) ——差异在于 Package.
AD9631ANZ
✅ 直接替换联系询价
查看数据手册 →AD8037ANZ
✅ 直接替换📋 参考替代料(不在目录中)
AD9632ANZ 最大额定值与电气特性
| Product Type | Single voltage-feedback operational amplifier |
| Number of Circuits | 1 circuit |
| -3 dB Bandwidth | 250 MHz |
| Minimum Stable Gain | 2 |
| Input Bias Current | 2 µA |
| Input Offset Voltage | 2 mV |
| 工作温度范围 | -40°C to +85°C |
| 封装 | 8-DIP (0.300 inch, 7.62 mm) |
| 安装方式 | Through hole |
| Packaging | Tube |
| Architecture | Voltage feedback |
| Distortion | Ultralow distortion |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
AD9632ANZ 8-dip (0.300 inch, 7.62 mm) 引脚配置指南
AD9632ANZ(8-dip (0.300 inch, 7.62 mm) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD9632ANZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD9632ANZ 适用于 6 应用s: High-Speed Instrumentation Signal Conditioning, Communications Receiver Front End, Video and Imaging Analog Front End, Pulse Shaping and Fast Edge Conditioning, Active Filtering and Frequency Response Design, Data Acquisition and Analog-to-Digital Interface.
High-Speed Instrumentation Signal Conditioning
The AD9632ANZ fits broadband instrumentation because its 250 MHz -3 dB bandwidth preserves the amplitude and phase behavior of rapidly changing sensor or test signals. A voltage-feedback configuration operating at gain 2 or greater allows the feedback network to define the closed-loop response while maintaining low distortion. Place the feedback elements close to the amplifier pins, bypass the supply rails locally, and route the analog signal path away from digital switching nodes. The principal trade-off is that the device is not unity-gain stable, so a one-to-one signal path should use an amplifier specifically qualified for that gain.
推荐
Communications Receiver Front End
The AD9632ANZ can amplify intermediate-frequency or other communications signals whose bandwidth falls below its 250 MHz limit while requiring rapid edge handling and low distortion. Its 2 µA input bias current is helpful when the source impedance is high, and the 2 mV offset should be included in the receiver's dc-error budget. Use gain 2 or greater and keep feedback-loop area small to limit parasitic feedback. Verify the complete output swing and common-mode range against the Analog Devices AD9632 Data Sheet, Rev. D before fixing the front-end gain.
推荐
Video and Imaging Analog Front End
The AD9632ANZ's 250 MHz bandwidth and ultralow distortion make it suitable for pre-processing video or image-sensor signals before conversion or sampling. The amplifier can operate as a fixed-gain stage because voltage-feedback amplifiers offer direct control of closed-loop gain with external resistors. Its minimum stable gain of 2 must be respected, and output-swing limits need to be checked for the intended signal amplitude. Short feedback traces, solid ground returns, and careful separation from clocks and converters are important at this bandwidth.
推荐
Pulse Shaping and Fast Edge Conditioning
The AD9632ANZ can condition narrow pulses or rapidly rising waveforms because its 250 MHz bandwidth supports high-frequency spectral content and its voltage-feedback architecture emphasizes settling behavior. A gain of at least 2 is required for stable operation, making the part more appropriate for pulse-amplification stages than for unity-gain buffers. Evaluate output-current demand and slew-rate limits against the pulse width and load. Short routing and local supply bypassing are essential for preserving pulse timing and limiting unintended overshoot or ringing.
推荐
Active Filtering and Frequency Response Design
The AD9632ANZ can implement active filter sections where the required signal bandwidth approaches 250 MHz and low distortion is important. Its voltage-feedback topology allows the response to be established by external feedback and loading networks, but component tolerances and parasitic inductance become increasingly important at these frequencies. Keep the gain above 2, use compact resistor and capacitor layouts, and use the manufacturer's recommended grounding and decoupling arrangement. Validate both magnitude and phase response on the final board because the physical implementation can differ materially from an ideal simulation.
推荐
Data Acquisition and Analog-to-Digital Interface
The AD9632ANZ is appropriate as an analog gain stage ahead of a high-speed data converter when source signals require more bandwidth and lower distortion than the ADC's internal front end can provide. The amplifier's 250 MHz bandwidth gives design headroom for the converter's input bandwidth, while gain 2 or greater satisfies its stability requirement. The interface must be analyzed for settling, output swing, loading, and converter input capacitance. Keep the connection to the ADC short and use controlled impedance when long board traces are unavoidable.
推荐
推荐产品汇总
工程参考数据: AD9632ANZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD9631ANZ | AD8037ANZ |
|---|---|---|---|
| Package | 8-DIP (0.300 inch, 7.62 mm) | 8-DIP | 8-DIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Number of Circuits | 1 circuit | 1 circuit | 1 amplifier |
| Mounting Style | Through hole | Through hole | Through hole |
| Special Feature | Stable at gain 2 or greater | Unity-gain stable | Ultra-low distortion, stable |
关键差异点
- Gain-2 stability aligns with fixed-gain amplifier stages (对比 AD9631ANZ)
- 250 MHz bandwidth with ultralow-distortion positioning (对比 AD8037ANZ)
- Single-circuit 8-DIP implementation (对比 AD9631ANZ)
设计说明
Do not configure the AD9632ANZ for unity gain. The manufacturer identifies the amplifier as stable at gain 2 or greater, while AD9631-family behavior differs in this respect. Confirm the intended closed-loop gain before layout release and verify that any feedback divider does not create a local condition that violates the manufacturer's recommended topology.
Treat the feedback network as part of the amplifier. Place feedback resistors and any compensation components close to the relevant pins, minimize the feedback-loop area, and route the high-frequency signal path away from clock, converter, and digital return currents. At a 250 MHz bandwidth, a theoretically acceptable schematic can become oscillatory or distort the intended response if PCB parasitics are not controlled.
Use short supply connections and place the manufacturer's recommended bypass capacitors immediately across the amplifier's supply pins. Keep the ground-return path continuous and connect it to the signal reference without long shared traces. Decoupling capacitance, ESR, placement, and the exact supply voltage must follow the AD9632 Data Sheet, Rev. D because the available excerpt does not provide a complete recommended-component table.
合规信息
The available manufacturer and distributor excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. The AD9632 is a production high-speed analog amplifier, but no AEC-Q100 qualification is identified.