AD96687BP - 2.5 ns Dual ECL Comparator | Analog Devices
MPN: AD96687BP ✗ जीवन की समाप्तिAD96687BP अवलोकन
An ultrafast voltage comparator is a high-speed signal-conditioning integrated circuit that compares two input voltages and produces a logic indication of their relative relationship. Within the broader semiconductor hierarchy, the AD96687BP belongs to the comparator and analog signal-processing family. Its ECL interface and open-emitter outputs are designed for systems in which very fast decision times and controlled output timing are more important than low static power or rail-to-rail input operation.
The AD96687BP provides two independent comparator elements, 2.5 ns propagation delay, and 50 ps propagation-delay dispersion. Dispersion describes the change in propagation delay when the input overdrive condition varies. Limiting this variation helps preserve timing consistency in systems that repeatedly compare changing or noisy analog signals. The complementary outputs support both true and inverted decision results, while the latch feature allows the comparison state to be held for downstream logic.
The ECL output arrangement uses open-emitter outputs, which provide flexible wired-interface options when pull-up and termination requirements are managed correctly. Open-emitter outputs can support wired-AND behavior and shared pull-up networks, but they do not directly provide a push-pull output. Circuit designers must account for termination, pull-up values, fanout, and signal-integrity behavior when connecting the AD96687BP to downstream ECL logic.
Typical uses include high-speed clock or data qualification, pulse-width and edge detection, threshold decisions in instrumentation, and dual-channel decision logic where complementary or latched results are useful. In these applications, the 2.5 ns propagation delay supports rapid signal processing, while the 50 ps dispersion specification provides a quantitative measure of delay consistency under changing overdrive conditions.
Layout is critical because a device operating at this speed can be affected by trace length, capacitance, supply return paths, and output termination. Keep connection paths short, place termination and pull-up components close to the relevant pins, and maintain a low-impedance supply distribution structure. Verify operation at the intended supply voltage and with the external termination network specified for the ECL interface.
This page consolidates the manufacturer product information, package identification, lifecycle status, technical context, comparison structure, and practical implementation guidance for AD96687BP. It is intended to help engineers distinguish the BP ceramic-package option from other AD96687 package variants and assess whether its dual-channel, latched ECL characteristics fit a precision high-speed design.
के लिए ड्रॉप-इन विकल्प AD96687BP — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंAD96687BP Maximum Ratings और Electrical Characteristics
| Comparator Type | Dual voltage comparator with latch |
| Number of Channels | 2 channels |
| Propagation Delay | 2.5 ns |
| Propagation Delay Dispersion | 50 ps |
| Logic Standard | ECL |
| आउटपुट कॉन्फ़िगरेशन | Complementary, open-emitter |
| Latch Function | Present |
| सप्लाई वोल्टेज | 5 V |
| ऑपरेटिंग तापमान रेंज | -25 C to +85 C |
| पैकेज | 20-pin PLCC (9 mm x 9 mm) |
| माउंटिंग प्रकार | Surface mount |
| Lead-Free Status | Lead-free |
| RoHS स्थिति | RoHS compliant |
AD96687BP 20-pin plcc (9 mm x 9 mm) पिन कॉन्फ़िगरेशन गाइड
AD96687BP (20-pin plcc (9 mm x 9 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD96687BP.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AD96687BP के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed Clock Qualification, Precision Pulse-Width Detection, Dual-Channel Threshold Monitoring, High-Speed Data Qualification, Precision Instrumentation Signal Detection, Complementary Edge Detection.
High-Speed Clock Qualification
The AD96687BP fits clock-qualification circuits because its 2.5 ns propagation delay supports rapid comparison of an incoming clock against a reference threshold, while 50 ps propagation-delay dispersion provides a defined measure of timing variation under changing overdrive. Two channels can be used to qualify complementary clock edges or monitor related timing relationships. The ECL open-emitter outputs require suitable pull-up or termination arrangements, and the latch can hold a decision when the surrounding system needs a captured status. Board implementation should minimize trace length and maintain a low-impedance return path so package and interconnect effects do not obscure the device’s nominal 2.5 ns timing performance.
अनुशंसित
Precision Pulse-Width Detection
The AD96687BP can support fast pulse-width or edge-event detection where a comparison result must be generated with a 2.5 ns propagation delay. Its dual-channel architecture permits two thresholds or related event checks to be handled in one package, while the latch supports decision capture for subsequent processing. The 50 ps dispersion specification helps characterize how propagation delay changes with input overdrive, which is relevant when pulse timing is affected by amplitude variation. Because the output stage uses open-emitter ECL outputs, the implementation must include the correct pull-up and termination arrangement and must manage latch release timing so the detector remains responsive to successive events.
अनुशंसित
Dual-Channel Threshold Monitoring
The AD96687BP is well suited to dual-channel threshold monitoring because it integrates two ultrafast comparator elements with 2.5 ns propagation delay. A design can use one channel for an upper threshold and the other for a lower threshold, or compare two independently sensed signals when their common-mode and drive conditions remain compatible. Complementary outputs allow both positive and negative decision indications to be used, while the latch can retain a detected state for control logic. The ECL interface is most appropriate in systems designed around compatible logic levels and termination, and the 20-pin PLCC footprint requires careful orientation and pin assignment from the manufacturer pin table.
अनुशंसित
High-Speed Data Qualification
The AD96687BP can qualify high-speed data events by comparing an incoming logic or analogized signal with a threshold and generating a latched decision. Its 2.5 ns propagation delay limits the comparator’s response time, and the 50 ps dispersion figure quantifies delay variation as overdrive changes. These characteristics are useful in repetitive circuits where a stable decision interval is required across changing signal amplitude. The open-emitter ECL outputs support flexible termination and wired-interface arrangements, but each output path requires deliberate pull-up and impedance control. Short traces, low-inductance supply connections, and careful return-path design are necessary to preserve effective timing at the system level.
अनुशंसित
Precision Instrumentation Signal Detection
The AD96687BP is applicable in instrumentation that must make a rapid binary decision from an analog measurement signal. Its dual channels allow two related thresholds or measurements to be evaluated, and the 2.5 ns propagation delay reduces the interval between the measured condition and the digital decision. The latch feature is useful when an instrument must retain an event indication until the next control cycle, while complementary outputs can simplify inversion in downstream logic. For laboratory or industrial instrumentation, the interface must be designed for ECL voltage levels and open-emitter output loading. Calibration, input common-mode limits, and termination tolerances should be evaluated together rather than treating the nominal delay as the only timing consideration.
अनुशंसित
Complementary Edge Detection
The AD96687BP can be used to detect positive and negative edge relationships because it provides dual channels and complementary outputs with a 2.5 ns propagation delay. In a dual-channel arrangement, one comparator may evaluate a signal against a reference while the other evaluates a complementary or delayed version of the same event. Complementary outputs can reduce the need for additional inversion logic, and the latch allows each detected edge state to remain available for system control. At this speed, package and PCB parasitics become meaningful, so output traces should be short and appropriately terminated. The ECL output network and component tolerances should be validated in the final board environment with realistic source impedance and loading.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा AD96687BP — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Package | 20-pin PLCC (9 mm x 9 mm) |
| Brand | Analog Devices |
| Comparator Channels | 2 channels |
| Propagation Delay | 2.5 ns |
| Propagation Delay Dispersion | 50 ps |
| Output Logic | Complementary ECL, open-emitter |
| Latch Function | Present |
| Supply Voltage | 5 V |
| Operating Temperature Range | -25 C to +85 C |
| Lifecycle Status | Not recommended for new designs |
मुख्य विशेषताएँ
- Very fast dual-channel decision function (बनामAD96687BQ)
- Specified propagation-delay dispersion (बनामAD96687BQ)
- Latched complementary ECL outputs (बनामAD96687BQ)
डिज़ाइन नोट्स
Treat the AD96687BP as a high-speed ECL device even though its nominal propagation delay is 2.5 ns. Keep input and output traces short, avoid unnecessary stubs, and provide a continuous ground reference beneath the device. The open-emitter outputs should connect to their pull-up or termination network without long loops, because trace inductance and capacitance can degrade edge behavior and decision timing.
Design the ECL interface around the manufacturer’s recommended termination and output-loading arrangement. Open-emitter outputs require correct pull-up values and impedance control to establish valid levels. Account for the effective load from downstream devices, board traces, and any wired-interface branches, then validate rise and fall behavior with oscilloscope measurements made close to the output pins.
Do not substitute the AD96687BQ for the AD96687BP on an existing board because the product records identify a 16-pin CERDIP package for the BQ variant and a 20-pin PLCC package for BP. Likewise, do not assume that a generic dual comparator is pin-compatible. Confirm the complete pin-description table, ECL levels, latch behavior, output topology, and package geometry before approving a replacement.
Use a low-impedance 5 V supply path and minimize series inductance between the supply and ground connections. High-speed switching current should return through a nearby plane rather than through peripheral traces. Follow the manufacturer’s supply-pin connection and decoupling recommendations, and verify rail noise and ground bounce at the device rather than measuring only at the power source.
अनुपालन जानकारी
The AD96687BP product record identifies the exact BP variant as lead-free and RoHS compliant. No AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals statement is established for this exact orderable part.