AD96687BP - 2.5 ns Dual ECL Comparator | Analog Devices
부품 번호: AD96687BP ✗ 단종AD96687BP 개요
An ultrafast voltage comparator is a high-speed signal-conditioning integrated circuit that compares two input voltages and produces a logic indication of their relative relationship. Within the broader semiconductor hierarchy, the AD96687BP belongs to the comparator and analog signal-processing family. Its ECL interface and open-emitter outputs are designed for systems in which very fast decision times and controlled output timing are more important than low static power or rail-to-rail input operation.
The AD96687BP provides two independent comparator elements, 2.5 ns propagation delay, and 50 ps propagation-delay dispersion. Dispersion describes the change in propagation delay when the input overdrive condition varies. Limiting this variation helps preserve timing consistency in systems that repeatedly compare changing or noisy analog signals. The complementary outputs support both true and inverted decision results, while the latch feature allows the comparison state to be held for downstream logic.
The ECL output arrangement uses open-emitter outputs, which provide flexible wired-interface options when pull-up and termination requirements are managed correctly. Open-emitter outputs can support wired-AND behavior and shared pull-up networks, but they do not directly provide a push-pull output. Circuit designers must account for termination, pull-up values, fanout, and signal-integrity behavior when connecting the AD96687BP to downstream ECL logic.
Typical uses include high-speed clock or data qualification, pulse-width and edge detection, threshold decisions in instrumentation, and dual-channel decision logic where complementary or latched results are useful. In these applications, the 2.5 ns propagation delay supports rapid signal processing, while the 50 ps dispersion specification provides a quantitative measure of delay consistency under changing overdrive conditions.
Layout is critical because a device operating at this speed can be affected by trace length, capacitance, supply return paths, and output termination. Keep connection paths short, place termination and pull-up components close to the relevant pins, and maintain a low-impedance supply distribution structure. Verify operation at the intended supply voltage and with the external termination network specified for the ECL interface.
This page consolidates the manufacturer product information, package identification, lifecycle status, technical context, comparison structure, and practical implementation guidance for AD96687BP. It is intended to help engineers distinguish the BP ceramic-package option from other AD96687 package variants and assess whether its dual-channel, latched ECL characteristics fit a precision high-speed design.
드롭인 대체품: AD96687BP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청AD96687BP 최대 정격 & 전기적 특성
| Comparator Type | Dual voltage comparator with latch |
| Number of Channels | 2 channels |
| Propagation Delay | 2.5 ns |
| Propagation Delay Dispersion | 50 ps |
| Logic Standard | ECL |
| 출력 구성 | Complementary, open-emitter |
| Latch Function | Present |
| 공급 전압 | 5 V |
| 동작 온도 범위 | -25 C to +85 C |
| 패키지 | 20-pin PLCC (9 mm x 9 mm) |
| 실장 유형 | Surface mount |
| Lead-Free Status | Lead-free |
| RoHS 상태 | RoHS compliant |
AD96687BP 20-pin plcc (9 mm x 9 mm) 핀 구성 가이드
AD96687BP(20-pin plcc (9 mm x 9 mm) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AD96687BP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD96687BP 적합 용도: 6 애플리케이션s: High-Speed Clock Qualification, Precision Pulse-Width Detection, Dual-Channel Threshold Monitoring, High-Speed Data Qualification, Precision Instrumentation Signal Detection, Complementary Edge Detection.
High-Speed Clock Qualification
The AD96687BP fits clock-qualification circuits because its 2.5 ns propagation delay supports rapid comparison of an incoming clock against a reference threshold, while 50 ps propagation-delay dispersion provides a defined measure of timing variation under changing overdrive. Two channels can be used to qualify complementary clock edges or monitor related timing relationships. The ECL open-emitter outputs require suitable pull-up or termination arrangements, and the latch can hold a decision when the surrounding system needs a captured status. Board implementation should minimize trace length and maintain a low-impedance return path so package and interconnect effects do not obscure the device’s nominal 2.5 ns timing performance.
추천
Precision Pulse-Width Detection
The AD96687BP can support fast pulse-width or edge-event detection where a comparison result must be generated with a 2.5 ns propagation delay. Its dual-channel architecture permits two thresholds or related event checks to be handled in one package, while the latch supports decision capture for subsequent processing. The 50 ps dispersion specification helps characterize how propagation delay changes with input overdrive, which is relevant when pulse timing is affected by amplitude variation. Because the output stage uses open-emitter ECL outputs, the implementation must include the correct pull-up and termination arrangement and must manage latch release timing so the detector remains responsive to successive events.
추천
Dual-Channel Threshold Monitoring
The AD96687BP is well suited to dual-channel threshold monitoring because it integrates two ultrafast comparator elements with 2.5 ns propagation delay. A design can use one channel for an upper threshold and the other for a lower threshold, or compare two independently sensed signals when their common-mode and drive conditions remain compatible. Complementary outputs allow both positive and negative decision indications to be used, while the latch can retain a detected state for control logic. The ECL interface is most appropriate in systems designed around compatible logic levels and termination, and the 20-pin PLCC footprint requires careful orientation and pin assignment from the manufacturer pin table.
추천
High-Speed Data Qualification
The AD96687BP can qualify high-speed data events by comparing an incoming logic or analogized signal with a threshold and generating a latched decision. Its 2.5 ns propagation delay limits the comparator’s response time, and the 50 ps dispersion figure quantifies delay variation as overdrive changes. These characteristics are useful in repetitive circuits where a stable decision interval is required across changing signal amplitude. The open-emitter ECL outputs support flexible termination and wired-interface arrangements, but each output path requires deliberate pull-up and impedance control. Short traces, low-inductance supply connections, and careful return-path design are necessary to preserve effective timing at the system level.
추천
Precision Instrumentation Signal Detection
The AD96687BP is applicable in instrumentation that must make a rapid binary decision from an analog measurement signal. Its dual channels allow two related thresholds or measurements to be evaluated, and the 2.5 ns propagation delay reduces the interval between the measured condition and the digital decision. The latch feature is useful when an instrument must retain an event indication until the next control cycle, while complementary outputs can simplify inversion in downstream logic. For laboratory or industrial instrumentation, the interface must be designed for ECL voltage levels and open-emitter output loading. Calibration, input common-mode limits, and termination tolerances should be evaluated together rather than treating the nominal delay as the only timing consideration.
추천
Complementary Edge Detection
The AD96687BP can be used to detect positive and negative edge relationships because it provides dual channels and complementary outputs with a 2.5 ns propagation delay. In a dual-channel arrangement, one comparator may evaluate a signal against a reference while the other evaluates a complementary or delayed version of the same event. Complementary outputs can reduce the need for additional inversion logic, and the latch allows each detected edge state to remain available for system control. At this speed, package and PCB parasitics become meaningful, so output traces should be short and appropriately terminated. The ECL output network and component tolerances should be validated in the final board environment with realistic source impedance and loading.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD96687BP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 20-pin PLCC (9 mm x 9 mm) |
| Brand | Analog Devices |
| Comparator Channels | 2 channels |
| Propagation Delay | 2.5 ns |
| Propagation Delay Dispersion | 50 ps |
| Output Logic | Complementary ECL, open-emitter |
| Latch Function | Present |
| Supply Voltage | 5 V |
| Operating Temperature Range | -25 C to +85 C |
| Lifecycle Status | Not recommended for new designs |
주요 차별점
- Very fast dual-channel decision function (vs AD96687BQ)
- Specified propagation-delay dispersion (vs AD96687BQ)
- Latched complementary ECL outputs (vs AD96687BQ)
설계 노트
Treat the AD96687BP as a high-speed ECL device even though its nominal propagation delay is 2.5 ns. Keep input and output traces short, avoid unnecessary stubs, and provide a continuous ground reference beneath the device. The open-emitter outputs should connect to their pull-up or termination network without long loops, because trace inductance and capacitance can degrade edge behavior and decision timing.
Design the ECL interface around the manufacturer’s recommended termination and output-loading arrangement. Open-emitter outputs require correct pull-up values and impedance control to establish valid levels. Account for the effective load from downstream devices, board traces, and any wired-interface branches, then validate rise and fall behavior with oscilloscope measurements made close to the output pins.
Do not substitute the AD96687BQ for the AD96687BP on an existing board because the product records identify a 16-pin CERDIP package for the BQ variant and a 20-pin PLCC package for BP. Likewise, do not assume that a generic dual comparator is pin-compatible. Confirm the complete pin-description table, ECL levels, latch behavior, output topology, and package geometry before approving a replacement.
Use a low-impedance 5 V supply path and minimize series inductance between the supply and ground connections. High-speed switching current should return through a nearby plane rather than through peripheral traces. Follow the manufacturer’s supply-pin connection and decoupling recommendations, and verify rail noise and ground bounce at the device rather than measuring only at the power source.
규정 준수 정보
The AD96687BP product record identifies the exact BP variant as lead-free and RoHS compliant. No AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals statement is established for this exact orderable part.