Analog Devices

AD9854AST - 300 MSPS Quadrature DDS | Analog Devices

MPN: AD9854AST ✓ सक्रिय
80-lead LQFP (14 x 14 mm) Package 48-bit tuning Speed
न्यूनतम ऑर्डर मात्रा: 1 |

AD9854AST अवलोकन

The Analog Devices AD9854AST is a production CMOS direct digital synthesis (DDS) device with two internal high-speed, high-performance quadrature DACs, forming a digitally programmable I and Q synthesizer. It supports operation up to 300 MSPS, uses 12-bit parallel or serial programming, and is housed in an 80-lead LQFP package. The device combines a phase accumulator, frequency tuning word, phase-control word, and dual DAC outputs in one integrated circuit.

A direct digital synthesizer is a frequency-generation technique in which a digital phase accumulator determines the instantaneous output phase and a lookup process converts that phase into a sampled waveform. In the AD9854, two DAC paths provide independently programmable I and Q outputs. This architecture is useful when a system requires coherent quadrature signals, digitally adjustable frequency, or programmable phase control for communications, instrumentation, or signal-generation equipment.

Key device capabilities include a 300 MSPS production CMOS implementation, 12-bit DAC resolution, parallel or serial data loading, and a 48-bit tuning capability identified in the manufacturer product listing. The AD9854 is also described as a complete quadrature DDS, allowing the two DAC outputs to support complex waveform generation rather than requiring separate external DACs. Its operating temperature range is specified as −40°C to +85°C, and the manufacturer lists the AD9854 as pin-for-pin compatible with the AD9852 single-tone synthesizer.

The AD9854AST uses a 48-lead or 80-lead-style leaded quad flat pack configuration as identified by the target ordering code and product listings. The exact exposed-pad, pin, and electrical details should be confirmed against the AD9854 manufacturer datasheet before PCB release. The package provides a practical interface for external clocking, reference clock, programming data, synchronization, and analog I/Q outputs.

Typical uses include RF and IF signal generation, communications test equipment, radar and electronic-warfare systems, arbitrary waveform generation, frequency synthesis, and phase-sensitive measurement. The two DAC outputs are particularly valuable when a system needs baseband quadrature signals for later upconversion or modulation.

Design attention should be paid to clock jitter, reference-clock quality, analog output filtering, supply sequencing, and the relationship between the update rate and output bandwidth. A DDS output is sampled, so a reconstruction or anti-imaging filter is normally required before the outputs are used as final analog signals. Use the manufacturer datasheet for the complete pin description, recommended application circuit, and timing constraints.

के लिए ड्रॉप-इन विकल्प AD9854AST — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD9854AST (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.

AD9854ASTZ

✅ ड्रॉप-इन
📦 80-LQFP (14 x 14 mm)
Same AD9854 family and 80-LQFP package; suffix and commercial ordering conditions require confirmation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD9854AST विशेषताएं

Product Type Direct Digital Synthesis (DDS) device
Architecture Complete quadrature DDS with two internal DACs
Maximum Sampling Rate 300 MSPS
DAC Resolution 12 bits
Frequency Tuning Resolution 48-bit tuning
आउटपुट कॉन्फ़िगरेशन Quadrature I and Q outputs
Programming Interface 12-bit parallel or serial
ऑपरेटिंग तापमान रेंज -40°C to +85°C
पैकेज 80-lead LQFP (14 x 14 mm)
माउंटिंग प्रकार Surface mount
Process Technology CMOS
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Internal Reference Clock Multiplier Available; performance trade-offs are described in the manufacturer datasheet

AD9854AST 80-lead lqfp (14 x 14 mm) पिन कॉन्फ़िगरेशन गाइड

AD9854AST (80-lead lqfp (14 x 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

AD9854AST के लिए 80-lead lqfp (14 x 14 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD9854AST.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD9854AST के लिए उपयुक्त है 6 अनुप्रयोगs: RF Communications Signal Generation, Quadrature Baseband Modulator, Test and Measurement Signal Source, Radar and Electronic-Warfare Test Systems, Digital Control of Frequency Synthesizers, Instrumentation and Arbitrary-Waveform Front Ends.

🌐

RF Communications Signal Generation

AD9854AST is suitable for generating programmable quadrature baseband signals used in RF communications transmitters, modulators, and channel simulators. Its two internal 12-bit DACs provide synchronized I and Q paths, while the 300 MSPS update rate supports waveform generation across a broad Nyquist range. A communications designer can use the serial or parallel programming interface to load frequency and phase-control words, then pass the analog outputs through reconstruction filters before modulation or upconversion. Clock-jitter management and filter selection remain central to preserving modulation accuracy.

📡

Quadrature Baseband Modulator

AD9854AST fits baseband modulator designs that require independently controlled in-phase and quadrature outputs. The integrated dual-DAC architecture avoids the need to pair the DDS with separate converter channels, and the 48-bit tuning capability supports fine frequency resolution. The two outputs should be filtered identically or with matched passbands to preserve phase balance. Designers should also account for DDS quantization noise and any reference-clock multiplier penalty when specifying the modulator’s adjacent-channel and phase-noise performance.

🖥️

Test and Measurement Signal Source

AD9854AST can serve as the programmable waveform core in laboratory and production test equipment. Its 12-bit DAC resolution, 300 MSPS operation, and serial/parallel programming options allow an embedded controller to select frequencies and phase relationships quickly. In an instrument architecture, the DDS outputs can feed programmable gain, attenuation, and reconstruction-filter stages. Clock reference quality and deterministic control-word updates are essential for repeatable measurements, particularly when checking mixer conversion products, filter response, or channel separation.

✈️

Radar and Electronic-Warfare Test Systems

AD9854AST is applicable to test systems that need coherent quadrature waveforms with digitally controlled frequency and phase. The internal I and Q DACs simplify generation of complex test vectors for receiver, transmitter, and antenna-chain evaluation. Because the device generates sampled waveforms, the system designer must specify output reconstruction filters, attenuators, and clocking architecture to meet spur and phase-noise requirements. The industrial temperature range of −40°C to +85°C supports equipment intended for controlled industrial or laboratory environments.

⚡

Digital Control of Frequency Synthesizers

AD9854AST can act as the precision waveform generator in a closed-loop frequency-control subsystem. A microcontroller updates the frequency tuning word, while the AD9854 converts that digital setting into a physically usable analog output. This arrangement is useful for automated calibration, sweep generation, and adaptive test sequences. Firmware should account for the required data-load timing and reset behavior, and the analog path should include low-pass filtering to remove images associated with the sampled DAC output.

🔧

Instrumentation and Arbitrary-Waveform Front Ends

AD9854AST supports instrumentation front ends that combine precise digital frequency control with two synchronous analog outputs. The 300 MSPS sampling rate and 12-bit resolution make it appropriate for building compact arbitrary-waveform or complex-signal generators around an embedded controller. The dual outputs can represent real and imaginary components of a complex waveform, while the controller manages tuning, phase, and operating modes. Practical implementation requires stable supplies, a low-jitter clock source, matched output routing, and carefully selected reconstruction filters.

अनुशंसित उत्पादों का सारांश

AD9854AST Analog Devices उपयोग में: RF Communications Signal Generation, Quadrature Baseband Modulator, Test and Measurement Signal Source, Radar and Electronic-Warfare Test Systems, Digital Control of Frequency Synthesizers, Instrumentation and Arbitrary-Waveform Front Ends AD9854ASTZ Related AD9854 ordering variant उपयोग में: RF Communications Signal Generation, Quadrature Baseband Modulator, Test and Measurement Signal Source, Radar and Electronic-Warfare Test Systems, Digital Control of Frequency Synthesizers, Instrumentation and Arbitrary-Waveform Front Ends
What is AD9854AST?
AD9854AST is an Analog Devices CMOS direct digital synthesis device with two internal 12-bit DACs for programmable I and Q output generation. It operates up to 300 MSPS and uses parallel or serial programming. According to the AD9854 product page, the device is a production complete quadrature DDS designed for digitally programmable synthesizer functions.
What are the key specifications of AD9854AST?
The AD9854AST provides a 300 MSPS maximum sampling rate, 12-bit DAC resolution, 48-bit tuning capability, and two programmable quadrature DAC outputs. The product is supplied in an 80-lead LQFP package and operates from −40°C to +85°C. These figures are identified in the Analog Devices AD9854 product page and product listings.
Where can I download the AD9854AST datasheet PDF?
The official AD9854 manufacturer datasheet is available at analog.com through the AD9854 data-sheet link. The manufacturer also provides a product page containing documentation, software, evaluation-kit, and selection-table resources. Use the official PDF to confirm package dimensions, pin names, timing, recommended circuitry, and electrical limits for the AD9854AST ordering code.
Where can I find the AD9854AST pinout?
The AD9854AST pinout is documented in the official Analog Devices AD9854 datasheet. Because the device has many control, clock, data, power, and analog-output connections, use the manufacturer pin-description table when assigning PCB nets rather than relying on a generic package diagram. The 80-lead LQFP package outline is confirmed by distributor product listings.
Is AD9854AST suitable for quadrature signal generation?
Yes, AD9854AST is specifically suited to quadrature I and Q signal generation because it combines a DDS core with two internal high-speed DACs. Its 300 MSPS sampling rate and 12-bit DAC resolution provide a digital waveform foundation for RF modulation, communications testing, and phase-sensitive signal generation.
What is the difference between AD9854AST and AD9854ASTZ?
AD9854AST and AD9854ASTZ are both associated with the 300 MSPS, 12-bit AD9854 DDS family and use an 80-lead LQFP format, but the ordering-code suffix can identify different commercial or packaging conditions. The manufacturer and distributor documentation should be checked for the exact ordering information before treating one suffix as a substitute for the other.
Can AD9854ASTZ replace AD9854AST?
AD9854ASTZ may be considered only after confirming its package, temperature grade, lead style, and ordering information against the AD9854AST requirements. The available product listing identifies AD9854ASTZ as an 80-lead LQFP AD9854 variant, but the manufacturer datasheet and customer-specific qualification requirements should determine whether it is an acceptable drop-in replacement.
What is the best drop-in replacement for AD9854AST?
AD9854ASTZ is the closest listed same-family candidate because it is identified as an 80-lead LQFP AD9854 variant. However, the available cross-reference information does not establish that it is a universally drop-in replacement for AD9854AST. Confirm ordering-code details, temperature grade, and the complete pin description before substituting it.
Is AD9854AST compatible with STM32F407?
AD9854AST can be controlled by an STM32F407 microcontroller through its serial programming interface, subject to the AD9854 timing and logic-level requirements. The STM32F407 can generate the serial data and control signals, while the DDS provides the frequency and phase synthesis. A search suggestion explicitly connects AD9854 with STM32F407, but the complete interface wiring and voltage compatibility still require verification.
How do I use AD9854AST with an STM32F407?
Use the STM32F407 GPIO or SPI peripheral to write the AD9854 control words, including the frequency tuning word and phase-control word, then configure the reference clock and data-loading timing. The AD9854 can provide two DAC outputs for quadrature I and Q signals. Confirm the exact serial mode, clock polarity, reset behavior, and output filtering requirements in the AD9854 datasheet.
What is the AD9854AST price?
The current customer-facing price is not shown as a static value on this page. Use the Request a Quote form on this page for the AD9854AST quotation and current commercial terms. The manufacturer product listing shows a starting list price of 39.76, but it should not be treated as a guaranteed quotation for the exact ordering code or requested quantity.
What is the lead time for AD9854AST?
The current lead time for AD9854AST is not stated on this page. Use the Request a Quote form to request current availability, lead time, minimum order quantity, and delivery details for the exact suffix and packaging arrangement. The manufacturer identifies AD9854 as a production CMOS device, which is useful context when planning a design-in.
Is AD9854AST in stock?
Inventory for the exact AD9854AST ordering code should be confirmed through the Request a Quote form on this page. The manufacturer lists the AD9854 as a production device, while distributor search results show catalog and availability information for related orderable variants. Submit the required quantity, suffix, and packaging details with the quote request.
What design considerations matter for AD9854AST?
The main design considerations are reference-clock jitter, DDS phase noise, power-supply integrity, analog-output reconstruction filtering, and control-word timing. The internal reference-clock multiplier can raise the noise floor and phase noise compared with operation without the multiplier, as described in the AD9854 datasheet. Use appropriate output filters and preserve the specified clock and grounding conditions.
Does AD9854AST meet RoHS and REACH requirements?
The available product information does not explicitly state the RoHS or REACH status for AD9854AST, so the compliance fields remain unknown. The Analog Devices product page and the manufacturer documentation should be checked for the current declarations for the exact ordering code. Do not infer compliance for a specific customer shipment from the package or technology description alone.

के लिए इंजीनियरिंग संदर्भ डेटा AD9854AST — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose AD9854AST when the design requires a high-speed, digitally programmable quadrature source with two integrated 12-bit DACs and a 48-bit tuning capability. It is particularly appropriate for RF baseband generation, communications test equipment, coherent waveform generation, and instrumentation. AD9854ASTZ is the closest listed same-family option in the 80-LQFP format, but the ordering suffix, temperature grade, and qualification conditions must be checked before using it as a drop-in substitute. This page does not identify a cross-brand pin-compatible replacement because the available cross-reference results do not establish one. If a design requires a single-tone synthesizer rather than independent I/Q outputs, review the AD9852 family, while recognizing that it is not automatically interchangeable without package and functional verification.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD9854ASTZ
Brand Analog Devices Analog Devices
Package 80-LQFP (14 x 14 mm) 80-LQFP (14 x 14 mm)
Product Type Direct Digital Synthesis (DDS) Direct Digital Synthesis IC
Sampling Rate 300 MSPS 300 MHz
DAC Resolution 12 bits 12 bits
Tuning Capability 48-bit tuning 48-bit

मुख्य विशेषताएँ

  • Integrated quadrature DAC outputs (बनामAD9854ASTZ)
  • High tuning granularity (बनामAD9854ASTZ)
  • Production industrial-temperature positioning (बनामAD9854ASTZ)

डिज़ाइन नोट्स

Use the manufacturer reference-clock and DDS update timing requirements when selecting the clock source. The AD9854 internal reference-clock multiplier can reduce the noise floor and increase phase noise compared with operation without the multiplier, so evaluate the complete clock chain against the required spur and phase-noise limits.

Place the AD9854AST close to the controller and clock circuitry, and route the programming and synchronization signals away from the analog I and Q outputs. Use a continuous ground-plane strategy and follow the manufacturer’s recommended decoupling and component-placement layout. Confirm the exact pin names and exposed-pad requirements against the official datasheet before release.

Treat the I and Q outputs as sampled signals and use appropriate reconstruction or anti-imaging filters. Keep the two paths symmetric in routing and filtering, and measure phase balance at the highest operating frequency. Reference-clock jitter, DAC settling behavior, and filter mismatch can all degrade quadrature purity even when the digital control words are correct.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available manufacturer and distributor information does not explicitly provide the requested compliance declarations for AD9854AST.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD9854AST datasheet AD9854AST datasheet pdf AD9854AST pinout AD9854AST equivalent AD9854AST replacement AD9854AST cross reference AD9854AST footprint AD9854AST price AD9854AST stock Analog Devices AD9854AST ad9854 stm32f407

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD9854AST AD9854ASTZ AD9852 Direct Digital Synthesis DDS CMOS 300 MSPS 12-bit DAC 48-bit tuning quadrature I and Q outputs parallel programming serial programming 80-lead LQFP surface-mount package reference clock phase noise reconstruction filter RF communications radar test systems instrumentation STM32F407
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें