AD9854AST - 300 MSPS Quadrature DDS | Analog Devices
部品番号: AD9854AST ✓ 生産中AD9854AST 概要
A direct digital synthesizer is a frequency-generation technique in which a digital phase accumulator determines the instantaneous output phase and a lookup process converts that phase into a sampled waveform. In the AD9854, two DAC paths provide independently programmable I and Q outputs. This architecture is useful when a system requires coherent quadrature signals, digitally adjustable frequency, or programmable phase control for communications, instrumentation, or signal-generation equipment.
Key device capabilities include a 300 MSPS production CMOS implementation, 12-bit DAC resolution, parallel or serial data loading, and a 48-bit tuning capability identified in the manufacturer product listing. The AD9854 is also described as a complete quadrature DDS, allowing the two DAC outputs to support complex waveform generation rather than requiring separate external DACs. Its operating temperature range is specified as −40°C to +85°C, and the manufacturer lists the AD9854 as pin-for-pin compatible with the AD9852 single-tone synthesizer.
The AD9854AST uses a 48-lead or 80-lead-style leaded quad flat pack configuration as identified by the target ordering code and product listings. The exact exposed-pad, pin, and electrical details should be confirmed against the AD9854 manufacturer datasheet before PCB release. The package provides a practical interface for external clocking, reference clock, programming data, synchronization, and analog I/Q outputs.
Typical uses include RF and IF signal generation, communications test equipment, radar and electronic-warfare systems, arbitrary waveform generation, frequency synthesis, and phase-sensitive measurement. The two DAC outputs are particularly valuable when a system needs baseband quadrature signals for later upconversion or modulation.
Design attention should be paid to clock jitter, reference-clock quality, analog output filtering, supply sequencing, and the relationship between the update rate and output bandwidth. A DDS output is sampled, so a reconstruction or anti-imaging filter is normally required before the outputs are used as final analog signals. Use the manufacturer datasheet for the complete pin description, recommended application circuit, and timing constraints.
ドロップイン代替品: AD9854AST — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD9854AST (同一形状・フットプリント) — 相違点: Package.
AD9854ASTZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD9854AST 仕様
| Product Type | Direct Digital Synthesis (DDS) device |
| Architecture | Complete quadrature DDS with two internal DACs |
| Maximum Sampling Rate | 300 MSPS |
| DAC Resolution | 12 bits |
| Frequency Tuning Resolution | 48-bit tuning |
| 出力構成 | Quadrature I and Q outputs |
| Programming Interface | 12-bit parallel or serial |
| 動作温度範囲 | -40°C to +85°C |
| パッケージ | 80-lead LQFP (14 x 14 mm) |
| 実装タイプ | Surface mount |
| Process Technology | CMOS |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Internal Reference Clock Multiplier | Available; performance trade-offs are described in the manufacturer datasheet |
AD9854AST 80-lead lqfp (14 x 14 mm) ピン配置ガイド
AD9854AST (80-lead lqfp (14 x 14 mm) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: AD9854AST.
詳細は データシート をご参照ください。
主な用途
AD9854AST の用途: 6 件s: RF Communications Signal Generation, Quadrature Baseband Modulator, Test and Measurement Signal Source, Radar and Electronic-Warfare Test Systems, Digital Control of Frequency Synthesizers, Instrumentation and Arbitrary-Waveform Front Ends.
RF Communications Signal Generation
AD9854AST is suitable for generating programmable quadrature baseband signals used in RF communications transmitters, modulators, and channel simulators. Its two internal 12-bit DACs provide synchronized I and Q paths, while the 300 MSPS update rate supports waveform generation across a broad Nyquist range. A communications designer can use the serial or parallel programming interface to load frequency and phase-control words, then pass the analog outputs through reconstruction filters before modulation or upconversion. Clock-jitter management and filter selection remain central to preserving modulation accuracy.
おすすめ
Quadrature Baseband Modulator
AD9854AST fits baseband modulator designs that require independently controlled in-phase and quadrature outputs. The integrated dual-DAC architecture avoids the need to pair the DDS with separate converter channels, and the 48-bit tuning capability supports fine frequency resolution. The two outputs should be filtered identically or with matched passbands to preserve phase balance. Designers should also account for DDS quantization noise and any reference-clock multiplier penalty when specifying the modulator’s adjacent-channel and phase-noise performance.
おすすめ
Test and Measurement Signal Source
AD9854AST can serve as the programmable waveform core in laboratory and production test equipment. Its 12-bit DAC resolution, 300 MSPS operation, and serial/parallel programming options allow an embedded controller to select frequencies and phase relationships quickly. In an instrument architecture, the DDS outputs can feed programmable gain, attenuation, and reconstruction-filter stages. Clock reference quality and deterministic control-word updates are essential for repeatable measurements, particularly when checking mixer conversion products, filter response, or channel separation.
おすすめ
Radar and Electronic-Warfare Test Systems
AD9854AST is applicable to test systems that need coherent quadrature waveforms with digitally controlled frequency and phase. The internal I and Q DACs simplify generation of complex test vectors for receiver, transmitter, and antenna-chain evaluation. Because the device generates sampled waveforms, the system designer must specify output reconstruction filters, attenuators, and clocking architecture to meet spur and phase-noise requirements. The industrial temperature range of −40°C to +85°C supports equipment intended for controlled industrial or laboratory environments.
おすすめ
Digital Control of Frequency Synthesizers
AD9854AST can act as the precision waveform generator in a closed-loop frequency-control subsystem. A microcontroller updates the frequency tuning word, while the AD9854 converts that digital setting into a physically usable analog output. This arrangement is useful for automated calibration, sweep generation, and adaptive test sequences. Firmware should account for the required data-load timing and reset behavior, and the analog path should include low-pass filtering to remove images associated with the sampled DAC output.
おすすめ
Instrumentation and Arbitrary-Waveform Front Ends
AD9854AST supports instrumentation front ends that combine precise digital frequency control with two synchronous analog outputs. The 300 MSPS sampling rate and 12-bit resolution make it appropriate for building compact arbitrary-waveform or complex-signal generators around an embedded controller. The dual outputs can represent real and imaginary components of a complex waveform, while the controller manages tuning, phase, and operating modes. Practical implementation requires stable supplies, a low-jitter clock source, matched output routing, and carefully selected reconstruction filters.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD9854AST — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD9854ASTZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 80-LQFP (14 x 14 mm) | 80-LQFP (14 x 14 mm) |
| Product Type | Direct Digital Synthesis (DDS) | Direct Digital Synthesis IC |
| Sampling Rate | 300 MSPS | 300 MHz |
| DAC Resolution | 12 bits | 12 bits |
| Tuning Capability | 48-bit tuning | 48-bit |
主な差別化要因
- Integrated quadrature DAC outputs (vs AD9854ASTZ)
- High tuning granularity (vs AD9854ASTZ)
- Production industrial-temperature positioning (vs AD9854ASTZ)
設計ノート
Use the manufacturer reference-clock and DDS update timing requirements when selecting the clock source. The AD9854 internal reference-clock multiplier can reduce the noise floor and increase phase noise compared with operation without the multiplier, so evaluate the complete clock chain against the required spur and phase-noise limits.
Place the AD9854AST close to the controller and clock circuitry, and route the programming and synchronization signals away from the analog I and Q outputs. Use a continuous ground-plane strategy and follow the manufacturer’s recommended decoupling and component-placement layout. Confirm the exact pin names and exposed-pad requirements against the official datasheet before release.
Treat the I and Q outputs as sampled signals and use appropriate reconstruction or anti-imaging filters. Keep the two paths symmetric in routing and filtering, and measure phase balance at the highest operating frequency. Reference-clock jitter, DAC settling behavior, and filter mismatch can all degrade quadrature purity even when the digital control words are correct.
コンプライアンス情報
The available manufacturer and distributor information does not explicitly provide the requested compliance declarations for AD9854AST.