Analog Devices

AD9952YSV - 400 MSPS 14-Bit DDS | Analog Devices

MPN: AD9952YSV ✓ सक्रिय
1.8 V Vdss 48-lead TQFP exposed pad, 7 x 7 mm Package 400 MSPS Speed
न्यूनतम ऑर्डर मात्रा: 1 |

AD9952YSV अवलोकन

The Analog Devices AD9952YSV is a 400 MSPS direct digital synthesizer with an integrated 14-bit DAC, 32-bit tuning word, and high-speed comparator in a 48-lead TQFP exposed-pad package. The device operates from a 1.8 V CMOS supply and combines digital phase accumulation with a high-performance DAC to generate precisely controlled analog output signals. It is recommended by Analog Devices for new designs.

A direct digital synthesizer, or DDS, is a frequency synthesizer that generates an output waveform from phase and frequency data rather than relying entirely on a conventional analog oscillator loop. In the signal hierarchy, the AD9952 belongs to the DDS family within clock and timing ICs, combining a digital phase accumulator, tuning-word registers, a DAC, and a comparator. This architecture provides digital frequency, phase, and amplitude control while retaining a conventional analog output.

Principal features include an internal clock rate of 400 MSPS, a 14-bit DAC, programmable phase and amplitude dithering, and a 32-bit frequency tuning word. The DAC output phase noise is specified at 125 dBc/Hz with a 1 kHz offset. Dynamic performance reaches 80 dB SFDR at a 130 MHz output with a 100 kHz offset. An integrated high-speed comparator allows the device to provide a digital clock output in addition to its analog I/O functions.

Technically, the AD9952 generates a stepped approximation to a sine wave at the selected output frequency. The 32-bit tuning word defines the phase increment applied by the phase accumulator, while the 14-bit DAC converts the accumulated phase into an analog voltage. Phase and amplitude dithering can spread quantization energy away from the carrier, improving spectral purity in demanding signal-generation systems. The high-speed internal architecture supports demanding waveform generation, clock synthesis, and frequency conversion applications.

Typical uses include communications test equipment, local oscillators, digital waveform generation, clock synthesis, tunable filters, and frequency-agile RF subsystems. The 400 MSPS operating rate and 14-bit output resolution are particularly useful when compact instrumentation must combine fine frequency resolution with high update and comparison rates.

The main design consideration is package and layout planning. The exposed pad requires careful connection to ground and adequate thermal copper, while the analog and digital supply paths must be decoupled close to their respective pins. High-speed output edges can couple into adjacent circuitry, so return-current paths and output routing deserve attention during PCB implementation.

This product overview combines manufacturer specifications, package details, application guidance, replacement considerations, and practical layout notes to support faster component selection and first-pass PCB planning.

के लिए ड्रॉप-इन विकल्प AD9952YSV — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

AD9952YSVZ

✅ ड्रॉप-इन
📦 48-lead TQFP exposed pad (7 x 7 mm, 0.5 mm pitch)
Core ratings are unchanged at 400 MSPS, 14-bit DAC, and 32-bit tuning word; the documented distinction is the ordering suffix and packaging presentation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD9952YSV विशेषताएं

Device Type Direct Digital Synthesizer (DDS)
Maximum Internal Clock Speed 400 MSPS
DAC Resolution 14 bit
Frequency Tuning Word Width 32 bit
सप्लाई वोल्टेज 1.8 V
Logic Technology 1.8 V CMOS
DAC Output Phase Noise 125 dBc/Hz at 1 kHz offset
Spurious-Free Dynamic Range 80 dB at 130 MHz output and 100 kHz offset
Phase Dithering Programmable
Amplitude Dithering Programmable
Integrated Converter 14-bit DAC
Integrated Comparator High-speed comparator
पैकेज 48-lead TQFP exposed pad, 7 x 7 mm
Lead Pitch 0.5 mm
Termination Count 48
माउंटिंग प्रकार Surface mount
Recommended for New Designs Yes

AD9952YSV 48-lead tqfp exposed pad, 7 x 7 mm पिन कॉन्फ़िगरेशन गाइड

AD9952YSV (48-lead tqfp exposed pad, 7 x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

AD9952YSV के लिए 48-lead tqfp exposed pad, 7 x 7 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD9952YSV.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD9952YSV के लिए उपयुक्त है 6 अनुप्रयोगs: Communications Test Equipment, Precision Local Oscillator, Digital Waveform Generation, Clock Synthesis, Tunable Filter and Modulator, Industrial Frequency Reference.

🌐

Communications Test Equipment

The AD9952YSV fits communications test equipment that requires a compact, digitally controlled excitation source. Its 400 MSPS internal clock and 14-bit DAC support waveform generation at high update rates, while the 32-bit tuning word provides fine frequency control. Programmable phase and amplitude dithering can reduce discrete spectral artifacts, and the specified 125 dBc/Hz phase noise at a 1 kHz offset is valuable when receiver and transmitter performance is being evaluated. The high-speed comparator also supports clock-oriented instrumentation where a square-wave reference is needed in addition to the analog DAC output. The 1.8 V CMOS supply keeps the device compatible with compact, high-density test systems.

📡

Precision Local Oscillator

The AD9952YSV can generate an adjustable local-oscillator signal for RF test benches and frequency-conversion subsystems. A 32-bit frequency tuning word allows the output frequency to be selected precisely from the serial interface, avoiding the coarse channel spacing associated with simpler integer-only dividers. The integrated 14-bit DAC generates the analog output directly, and programmable dithering helps spread quantization energy. For phase-sensitive measurements, the datasheet's 125 dBc/Hz phase-noise figure at a 1 kHz offset provides a useful close-in performance reference. The device is particularly attractive where instrument control, fine frequency resolution, and compact integration are more important than implementing a discrete synthesizer loop.

🧩

Digital Waveform Generation

The AD9952YSV is suited to digital waveform-generation modules that combine frequency agility with direct analog output. The internal phase accumulator and 14-bit DAC operate at up to 400 MSPS, allowing the synthesizer to update at rates appropriate for laboratory and communications signal simulation. The 32-bit tuning word supports fine output-frequency resolution, while programmable phase and amplitude dithering help decorrelate quantization-related harmonics. A high-speed comparator provides a digital output derived from the same timing architecture, which is useful when both analog and digital trigger references are required. The device simplifies the signal path by integrating the DAC and comparator rather than requiring separate output components.

🖥️

Clock Synthesis

The AD9952YSV can support programmable clock synthesis in instrumentation and communication circuits. Its 32-bit tuning word establishes the desired frequency with high resolution, while the integrated high-speed comparator converts the internal waveform into a usable digital clock. Phase and amplitude dithering can spread quantization energy and improve spectral behavior when the generated waveform is observed with a spectrum analyzer. The 400 MSPS internal architecture is relevant to systems that need flexible frequency selection without relying on a bank of discrete oscillators. The 1.8 V CMOS supply and integrated high-speed output functions help reduce the component count of compact clock-generation assemblies.

🔧

Tunable Filter and Modulator

The AD9952YSV can serve as the controllable signal source for tunable-filter, modulation, and frequency-analysis experiments. Its digitally selected output frequency is derived from the 32-bit tuning word, allowing a test system to sweep or reposition a stimulus without analog tuning components. The 14-bit DAC provides the analog excitation, while programmable phase and amplitude dithering offers ways to manage coherent quantization artifacts. The specified 80 dB SFDR at a 130 MHz output with a 100 kHz offset gives designers a reference for expected spectral performance. Integrating the synthesizer and DAC also keeps the analog source compact while retaining remote frequency and phase control through the serial interface.

🏭

Industrial Frequency Reference

The AD9952YSV can provide a compact programmable reference for industrial test and control systems that require stable, digitally selected frequencies. The 32-bit tuning word gives the controller fine authority over output frequency, and the integrated 14-bit DAC removes the need for a separate converter in simple signal-chain designs. The high-speed comparator supports systems that require a digital timing reference as well as an analog output. At a 1.8 V supply, the device fits compact control electronics, although PCB designers must preserve short return paths and adequate grounding around the exposed pad. The manufacturer recommends the AD9952 family for new designs, making it appropriate for long-life instrumentation platforms.

अनुशंसित उत्पादों का सारांश

AD9952YSV Analog Devices उपयोग में: Communications Test Equipment, Precision Local Oscillator, Digital Waveform Generation, Clock Synthesis, Tunable Filter and Modulator, Industrial Frequency Reference AD9952YSVZ Reel-oriented ordering option उपयोग में: Communications Test Equipment, Precision Local Oscillator, Digital Waveform Generation, Clock Synthesis, Tunable Filter and Modulator, Industrial Frequency Reference
Where can I download the AD9952YSV datasheet PDF?
The official AD9952YSV datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9952.pdf. According to the manufacturer datasheet, the AD9952 is a 1.8 V CMOS DDS with a 14-bit DAC operating up to 400 MSPS. The same document contains the electrical characteristics, timing information, register descriptions, application details, and package drawings needed for design review.
What are the key specifications of AD9952YSV that engineers should know?
The AD9952YSV combines a 400 MSPS internal clock, 14-bit DAC, 32-bit frequency tuning word, programmable phase and amplitude dithering, and a high-speed comparator. According to the Analog Devices manufacturer datasheet, DAC output phase noise is 125 dBc/Hz at a 1 kHz offset, while SFDR reaches 80 dB at a 130 MHz output with a 100 kHz offset. It uses a 1.8 V CMOS supply.
What is the operating voltage of AD9952YSV?
The AD9952YSV operates from a 1.8 V CMOS supply. According to the Analog Devices manufacturer datasheet, the device integrates a 14-bit DAC and digital synthesis circuitry optimized for this supply voltage. Its digital interface and internal synthesis functions therefore require a 1.8 V design environment, with supply decoupling implemented close to the device power pins.
How fast does the AD9952YSV internal clock operate?
The AD9952YSV internal clock operates up to 400 MSPS. According to the Analog Devices manufacturer datasheet, this high update rate drives the integrated 14-bit DAC and supports high-speed waveform generation and digital-to-analog conversion. The operating rate also underlies the specified 125 dBc/Hz phase-noise performance at a 1 kHz offset and 80 dB SFDR at a 130 MHz output.
What resolution does the AD9952YSV DAC provide?
The AD9952YSV includes a 14-bit DAC. According to the Analog Devices manufacturer datasheet, the converter operates with the DDS architecture and is driven by the device's 400 MSPS internal clock. The 14-bit output resolution supports controlled analog sine-wave generation, while programmable phase and amplitude dithering help redistribute quantization-related spectral energy.
Where can I find the AD9952YSV pinout and package information?
The AD9952YSV pinout and package drawing are in the Analog Devices manufacturer datasheet. The device is identified as a 48-lead TQFP exposed-pad package with a 7 x 7 mm body and 0.5 mm lead pitch. Use the pin-description table and land-pattern drawing in that document when assigning nets and creating the PCB footprint.
What can replace AD9952YSV?
The AD9952YSVZ is the closest identified drop-in option because it retains the AD9952 400 MSPS DDS, 14-bit DAC, 32-bit tuning word, 48-lead TQFP exposed-pad package, and 0.5 mm pitch. Its principal ordering difference is the reel-oriented package designation. Confirm the manufacturer's ordering information and the exact exposed-pad layout before approving it as a replacement.
Is AD9952YSV the same as AD9952YSVZ?
The AD9952YSV and AD9952YSVZ share the core AD9952 electrical architecture, including the 400 MSPS clock, 14-bit DAC, and 32-bit tuning word, and are associated with the same 48-lead TQFP exposed-pad format. The meaningful distinction is the ordering suffix and associated packaging presentation. Check the exact package drawing and required delivery format before treating them as interchangeable.
What is the best Analog Devices equivalent for AD9952YSV?
The AD9952YSVZ is the best identified Analog Devices equivalent because it preserves the 400 MSPS internal clock, 14-bit DAC, 32-bit tuning word, and 48-lead TQFP exposed-pad package. The AD9952YSVZ differs principally in its ordering suffix rather than in a documented change to the core DDS specifications. Verify the order code and mechanical details for the intended assembly process.
AD9952YSV vs AD9952YSVZ - which is better for an instrumented RF design?
Choose AD9952YSV when its ordering configuration matches the intended assembly method, and choose AD9952YSVZ when the reel-oriented configuration is appropriate. Both devices use the same AD9952 core with a 400 MSPS clock, 14-bit DAC, and 32-bit tuning word. According to Analog Devices product information, the meaningful selection consideration is the exact ordering code rather than a change in the core conversion performance.
When should I choose AD9952YSV over another DDS?
Choose AD9952YSV when the design requires a 400 MSPS synthesis engine, a 14-bit DAC, a 32-bit tuning word, and programmable dithering in a 48-lead TQFP exposed-pad package. Its 1.8 V CMOS architecture is suited to compact instrumentation and RF signal chains. Choose another DDS only when it provides a necessary interface, output, package, resolution, or performance advantage.
Is AD9952YSV suitable for RF and communications test equipment?
The AD9952YSV is suitable for RF and communications test equipment requiring a compact, digitally controlled signal source. Its 400 MSPS internal clock, 14-bit DAC, 32-bit tuning word, programmable dithering, and high-speed comparator support precise signal generation. According to the Analog Devices manufacturer datasheet, the output phase noise is 125 dBc/Hz at a 1 kHz offset.
Where can I buy AD9952YSV online and what is its price?
Use the Request a Quote form on this page to obtain current AD9952YSV commercial terms, availability, and a quote for the required quantity and packaging. The form supports direct sourcing without relying on static pricing information. For technical confirmation, the official Analog Devices product page and manufacturer datasheet remain the primary references for device selection.
What is the lead time for AD9952YSV?
Request the current AD9952YSV lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, manufacturing status, and shipment destination, so it should be confirmed for the specific order. Analog Devices lists the AD9952 for new designs, but a production-specific availability confirmation is still required for procurement.
Is AD9952YSV in stock?
Current AD9952YSV stock should be confirmed through the Request a Quote form on this page. Include the required quantity, tray or reel preference, target date, and shipment destination so the commercial response reflects the actual production need. The manufacturer's product page identifies AD9952 as recommended for new designs.

के लिए इंजीनियरिंग संदर्भ डेटा AD9952YSV — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose AD9952YSV for new compact signal-generation designs that require a 400 MSPS DDS, a 14-bit DAC, a 32-bit tuning word, programmable phase and amplitude dithering, and an integrated high-speed comparator. Its 1.8 V CMOS architecture is well suited to communications test equipment, programmable local oscillators, clock synthesis, and compact RF instrumentation. The AD9952YSVZ is the closest identified drop-in ordering option because it retains the same core specifications and 48-lead exposed-pad format; select it when its ordering and packaging presentation better match the assembly process. A different DDS should be considered only when it offers a necessary advantage in output resolution, interface architecture, package size, output current, spectral performance, or qualification. Any proposed replacement must be checked against the original register map, serial timing, pin assignments, initialization sequence, and exposed-pad layout rather than against clock speed alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD9952YSVZ
Package 48-lead TQFP exposed pad, 7 x 7 mm, 0.5 mm pitch 48-lead TQFP exposed pad, 7 x 7 mm, 0.5 mm pitch
Brand Analog Devices Analog Devices
Internal Clock Speed 400 MSPS 400 MSPS
DAC Resolution 14 bit 14 bit
Frequency Tuning Word 32 bit 32 bit
Supply Voltage 1.8 V 1.8 V
DAC Output Phase Noise 125 dBc/Hz at 1 kHz offset 125 dBc/Hz at 1 kHz offset
Spurious-Free Dynamic Range 80 dB at 130 MHz output and 100 kHz offset 80 dB at 130 MHz output and 100 kHz offset
Dithering Programmable phase and amplitude dithering Programmable phase and amplitude dithering
Comparator Integrated high-speed comparator Integrated high-speed comparator

मुख्य विशेषताएँ

  • Exact core conversion performance in the identified replacement (बनामAD9952YSVZ)
  • Integrated phase and amplitude dithering (बनामAD9952YSVZ)
  • Identical exposed-pad mechanical format (बनामAD9952YSVZ)

डिज़ाइन नोट्स

Connect the exposed pad to the ground plane using a low-impedance thermal and electrical path. The pad is part of the thermal path as well as the return reference for high-speed signals. Follow the exposed-pad and land-pattern guidance in the Analog Devices manufacturer datasheet, and avoid interrupting the ground plane beneath the device with unrelated routing.

Place the required supply and ground bypass capacitors immediately adjacent to their corresponding pins. Keep analog and digital return currents separated until they reach a deliberate common-ground point, and minimize the loop area around the 1.8 V supply network. The high-speed internal clock makes short, direct return paths especially important for repeatable output and comparator performance.

Route the DAC output and comparator output as controlled-impedance transmission lines if they extend beyond the immediate board area. Avoid running these outputs beneath noisy digital buses, switching-node traces, or discontinuous plane boundaries. Terminate unused outputs according to the device recommendations and confirm the final ringing and amplitude behavior with an oscilloscope.

Do not substitute a DDS with a different package or interface based only on clock rate and DAC resolution. The 32-bit tuning word, serial programming protocol, comparator behavior, exposed-pad construction, and register map must all match the original design. Review the manufacturer datasheet's pin description, serial-interface timing, and initialization sequence before releasing a PCB or production design.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Analog Devices recommends the AD9952 family for new designs. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD9952YSV datasheet AD9952YSV pinout AD9952YSV datasheet pdf AD9952YSV equivalent AD9952YSV replacement AD9952YSV cross reference AD9952YSV vs AD9952YSVZ AD9952YSV footprint AD9952YSV spice model AD9952YSV price AD9952YSV stock Analog Devices AD9952YSV AD9952 400 MSPS DDS AD9952 48 TQFP exposed pad AD9952 RF local oscillator

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD9952YSV AD9952YSVZ AD9952YSVZ-REEL7 direct digital synthesizer DDS frequency synthesizer digital-to-analog converter DAC 14-bit DAC 400 MSPS internal clock 32-bit frequency tuning word phase accumulator programmable phase dithering programmable amplitude dithering high-speed comparator 125 dBc/Hz phase noise 80 dB SFDR 1.8 V CMOS 48-lead TQFP exposed pad 7 x 7 mm package 0.5 mm lead pitch communications test equipment RF local oscillator clock synthesis
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें