AD9952YSV - 400 MSPS 14-Bit DDS | Analog Devices
料号: AD9952YSV ✓ 量产中AD9952YSV 概述
A direct digital synthesizer, or DDS, is a frequency synthesizer that generates an output waveform from phase and frequency data rather than relying entirely on a conventional analog oscillator loop. In the signal hierarchy, the AD9952 belongs to the DDS family within clock and timing ICs, combining a digital phase accumulator, tuning-word registers, a DAC, and a comparator. This architecture provides digital frequency, phase, and amplitude control while retaining a conventional analog output.
Principal features include an internal clock rate of 400 MSPS, a 14-bit DAC, programmable phase and amplitude dithering, and a 32-bit frequency tuning word. The DAC output phase noise is specified at 125 dBc/Hz with a 1 kHz offset. Dynamic performance reaches 80 dB SFDR at a 130 MHz output with a 100 kHz offset. An integrated high-speed comparator allows the device to provide a digital clock output in addition to its analog I/O functions.
Technically, the AD9952 generates a stepped approximation to a sine wave at the selected output frequency. The 32-bit tuning word defines the phase increment applied by the phase accumulator, while the 14-bit DAC converts the accumulated phase into an analog voltage. Phase and amplitude dithering can spread quantization energy away from the carrier, improving spectral purity in demanding signal-generation systems. The high-speed internal architecture supports demanding waveform generation, clock synthesis, and frequency conversion applications.
Typical uses include communications test equipment, local oscillators, digital waveform generation, clock synthesis, tunable filters, and frequency-agile RF subsystems. The 400 MSPS operating rate and 14-bit output resolution are particularly useful when compact instrumentation must combine fine frequency resolution with high update and comparison rates.
The main design consideration is package and layout planning. The exposed pad requires careful connection to ground and adequate thermal copper, while the analog and digital supply paths must be decoupled close to their respective pins. High-speed output edges can couple into adjacent circuitry, so return-current paths and output routing deserve attention during PCB implementation.
This product overview combines manufacturer specifications, package details, application guidance, replacement considerations, and practical layout notes to support faster component selection and first-pass PCB planning.
直接替换替代料: AD9952YSV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD9952YSVZ
✅ 直接替换📋 参考替代料(不在目录中)
AD9952YSV 规格参数
| Device Type | Direct Digital Synthesizer (DDS) |
| Maximum Internal Clock Speed | 400 MSPS |
| DAC Resolution | 14 bit |
| Frequency Tuning Word Width | 32 bit |
| 电源电压 | 1.8 V |
| Logic Technology | 1.8 V CMOS |
| DAC Output Phase Noise | 125 dBc/Hz at 1 kHz offset |
| Spurious-Free Dynamic Range | 80 dB at 130 MHz output and 100 kHz offset |
| Phase Dithering | Programmable |
| Amplitude Dithering | Programmable |
| Integrated Converter | 14-bit DAC |
| Integrated Comparator | High-speed comparator |
| 封装 | 48-lead TQFP exposed pad, 7 x 7 mm |
| Lead Pitch | 0.5 mm |
| Termination Count | 48 |
| 安装类型 | Surface mount |
| Recommended for New Designs | Yes |
AD9952YSV 48-lead tqfp exposed pad, 7 x 7 mm 引脚配置指南
AD9952YSV(48-lead tqfp exposed pad, 7 x 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: AD9952YSV.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD9952YSV 适用于 6 应用s: Communications Test Equipment, Precision Local Oscillator, Digital Waveform Generation, Clock Synthesis, Tunable Filter and Modulator, Industrial Frequency Reference.
Communications Test Equipment
The AD9952YSV fits communications test equipment that requires a compact, digitally controlled excitation source. Its 400 MSPS internal clock and 14-bit DAC support waveform generation at high update rates, while the 32-bit tuning word provides fine frequency control. Programmable phase and amplitude dithering can reduce discrete spectral artifacts, and the specified 125 dBc/Hz phase noise at a 1 kHz offset is valuable when receiver and transmitter performance is being evaluated. The high-speed comparator also supports clock-oriented instrumentation where a square-wave reference is needed in addition to the analog DAC output. The 1.8 V CMOS supply keeps the device compatible with compact, high-density test systems.
推荐
Precision Local Oscillator
The AD9952YSV can generate an adjustable local-oscillator signal for RF test benches and frequency-conversion subsystems. A 32-bit frequency tuning word allows the output frequency to be selected precisely from the serial interface, avoiding the coarse channel spacing associated with simpler integer-only dividers. The integrated 14-bit DAC generates the analog output directly, and programmable dithering helps spread quantization energy. For phase-sensitive measurements, the datasheet's 125 dBc/Hz phase-noise figure at a 1 kHz offset provides a useful close-in performance reference. The device is particularly attractive where instrument control, fine frequency resolution, and compact integration are more important than implementing a discrete synthesizer loop.
推荐
Digital Waveform Generation
The AD9952YSV is suited to digital waveform-generation modules that combine frequency agility with direct analog output. The internal phase accumulator and 14-bit DAC operate at up to 400 MSPS, allowing the synthesizer to update at rates appropriate for laboratory and communications signal simulation. The 32-bit tuning word supports fine output-frequency resolution, while programmable phase and amplitude dithering help decorrelate quantization-related harmonics. A high-speed comparator provides a digital output derived from the same timing architecture, which is useful when both analog and digital trigger references are required. The device simplifies the signal path by integrating the DAC and comparator rather than requiring separate output components.
推荐
Clock Synthesis
The AD9952YSV can support programmable clock synthesis in instrumentation and communication circuits. Its 32-bit tuning word establishes the desired frequency with high resolution, while the integrated high-speed comparator converts the internal waveform into a usable digital clock. Phase and amplitude dithering can spread quantization energy and improve spectral behavior when the generated waveform is observed with a spectrum analyzer. The 400 MSPS internal architecture is relevant to systems that need flexible frequency selection without relying on a bank of discrete oscillators. The 1.8 V CMOS supply and integrated high-speed output functions help reduce the component count of compact clock-generation assemblies.
推荐
Tunable Filter and Modulator
The AD9952YSV can serve as the controllable signal source for tunable-filter, modulation, and frequency-analysis experiments. Its digitally selected output frequency is derived from the 32-bit tuning word, allowing a test system to sweep or reposition a stimulus without analog tuning components. The 14-bit DAC provides the analog excitation, while programmable phase and amplitude dithering offers ways to manage coherent quantization artifacts. The specified 80 dB SFDR at a 130 MHz output with a 100 kHz offset gives designers a reference for expected spectral performance. Integrating the synthesizer and DAC also keeps the analog source compact while retaining remote frequency and phase control through the serial interface.
推荐
Industrial Frequency Reference
The AD9952YSV can provide a compact programmable reference for industrial test and control systems that require stable, digitally selected frequencies. The 32-bit tuning word gives the controller fine authority over output frequency, and the integrated 14-bit DAC removes the need for a separate converter in simple signal-chain designs. The high-speed comparator supports systems that require a digital timing reference as well as an analog output. At a 1.8 V supply, the device fits compact control electronics, although PCB designers must preserve short return paths and adequate grounding around the exposed pad. The manufacturer recommends the AD9952 family for new designs, making it appropriate for long-life instrumentation platforms.
推荐
推荐产品汇总
工程参考数据: AD9952YSV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD9952YSVZ |
|---|---|---|
| Package | 48-lead TQFP exposed pad, 7 x 7 mm, 0.5 mm pitch | 48-lead TQFP exposed pad, 7 x 7 mm, 0.5 mm pitch |
| Brand | Analog Devices | Analog Devices |
| Internal Clock Speed | 400 MSPS | 400 MSPS |
| DAC Resolution | 14 bit | 14 bit |
| Frequency Tuning Word | 32 bit | 32 bit |
| Supply Voltage | 1.8 V | 1.8 V |
| DAC Output Phase Noise | 125 dBc/Hz at 1 kHz offset | 125 dBc/Hz at 1 kHz offset |
| Spurious-Free Dynamic Range | 80 dB at 130 MHz output and 100 kHz offset | 80 dB at 130 MHz output and 100 kHz offset |
| Dithering | Programmable phase and amplitude dithering | Programmable phase and amplitude dithering |
| Comparator | Integrated high-speed comparator | Integrated high-speed comparator |
关键差异点
- Exact core conversion performance in the identified replacement (对比 AD9952YSVZ)
- Integrated phase and amplitude dithering (对比 AD9952YSVZ)
- Identical exposed-pad mechanical format (对比 AD9952YSVZ)
设计说明
Connect the exposed pad to the ground plane using a low-impedance thermal and electrical path. The pad is part of the thermal path as well as the return reference for high-speed signals. Follow the exposed-pad and land-pattern guidance in the Analog Devices manufacturer datasheet, and avoid interrupting the ground plane beneath the device with unrelated routing.
Place the required supply and ground bypass capacitors immediately adjacent to their corresponding pins. Keep analog and digital return currents separated until they reach a deliberate common-ground point, and minimize the loop area around the 1.8 V supply network. The high-speed internal clock makes short, direct return paths especially important for repeatable output and comparator performance.
Route the DAC output and comparator output as controlled-impedance transmission lines if they extend beyond the immediate board area. Avoid running these outputs beneath noisy digital buses, switching-node traces, or discontinuous plane boundaries. Terminate unused outputs according to the device recommendations and confirm the final ringing and amplitude behavior with an oscilloscope.
Do not substitute a DDS with a different package or interface based only on clock rate and DAC resolution. The 32-bit tuning word, serial programming protocol, comparator behavior, exposed-pad construction, and register map must all match the original design. Review the manufacturer datasheet's pin description, serial-interface timing, and initialization sequence before releasing a PCB or production design.
合规信息
Analog Devices recommends the AD9952 family for new designs. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.