Analog Devices

ADF4360-3BCPZRL - 1.95 GHz Integer-N PLL with VCO | Analog Devices

MPN: ADF4360-3BCPZRL ✓ सक्रिय
3.0 V to 3.6 V Vdss 24-terminal WFQFN exposed-pad CSP Package 1750 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

ADF4360-3BCPZRL अवलोकन

The Analog Devices ADF4360-3BCPZRL is a fully integrated integer-N frequency synthesizer with an on-chip voltage-controlled oscillator, a 1500 MHz to 1950 MHz RF output range, and a 24-lead WFQFN exposed-pad package. It combines a programmable PLL, VCO, integer-N frequency divider, and reference divider in one RF clock-generation IC.

An integer-N frequency synthesizer generates a stable output phase-locked to a reference oscillator. The PLL compares divided feedback with the reference signal, while the integrated VCO supplies the variable-frequency output. The ADF4360-3 family is designed around a 1750 MHz center frequency and also provides a divide-by-2 output option. A 3-wire serial interface programs frequency, divider ratios, output power, and operating functions.

Key characteristics include a 3.3 V analog supply range of 3.0 V to 3.6 V, 1.8 V logic compatibility, programmable RF output power, a digital lock-detect function, and hardware or software power-down modes. The 1500 MHz to 1950 MHz operating range makes the device suitable for RF transceivers, wireless infrastructure, test equipment, and frequency-hopping systems.

The device uses an integer-N architecture rather than a fractional-N feedback divider. This simplifies frequency planning and control, but the achievable output frequency and phase-noise performance depend on the reference frequency, loop filter, PFD settings, output division, and printed-circuit-board implementation. Integer-N synthesizers are particularly suitable where a clean integer relationship between reference and output frequency simplifies calibration.

Typical uses include 1.5 GHz to 1.95 GHz RF signal generation, local-oscillator synthesis, communication test equipment, and microwave subsystem clocking. The ADF4360-3BCPZRL is also a sensible choice when board area must be minimized because the PLL, VCO, dividers, and control interface share one exposed-pad package.

Layout quality is critical in an integrated VCO and PLL. Place the loop-filter components, reference components, supply bypass capacitors, and decoupling network close to their associated pins. Use a continuous ground reference beneath the exposed pad, provide low-impedance supply connections, and keep sensitive feedback and control traces short and isolated from high-current switching paths.

This product summary combines the manufacturer's functional description, package information, operating limits, pin-function guidance, interface details, and practical RF layout considerations into an engineering-oriented reference for component selection, schematic capture, PCB implementation, and system bring-up.

के लिए ड्रॉप-इन विकल्प ADF4360-3BCPZRL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADF4360-3BCPZRL (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Device Type, Divide-by-2 Output Range, Power-Down Modes, Product Type.

Analog Devices
Package: 24-lead LFCSP with exposed pad
Divide-by-2 Output Range: 600 MHz to 700 MHz
Product Type: Integer-N synthesizer and voltage-controlled oscillator
इसके साथ तुलना करें ADF4360-3BCPZRL →
Analog Devices
Package: 24-lead LFCSP with exposed pad
Product Type: Integer-N frequency synthesizer with integrated VCO
इसके साथ तुलना करें ADF4360-3BCPZRL →
Analog Devices
Package: 24-lead WFQFN with exposed pad
Device Type: Integrated integer-N synthesizer and voltage-controlled oscillator
Divide-by-2 Output Range: 175 MHz to 900 MHz
इसके साथ तुलना करें ADF4360-3BCPZRL →

ADF4360-4BCPZRL7

✅ ड्रॉप-इन
📦 24-terminal WFQFN exposed-pad CSP
RF output range is 1.75 GHz versus 1.95 GHz, a 10.8% reduction in upper output frequency; package and pin architecture are shared.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADF4360-7BCPZRL

✅ ड्रॉप-इन
Analog Devices
📦 24-terminal WFQFN exposed-pad CSP
Integrated integer-N synthesizer and voltage-controlled oscillator · 350 MHz to 1800 MHz · 1800 MHz · 175 MHz to 900 MHz · 1800 MHz · Integer-N · External · 3.6 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADF4360-1BCPRL7

✅ ड्रॉप-इन
📦 24-terminal WFQFN exposed-pad CSP
Lower-frequency family member with a 1.5 GHz output range versus 1.95 GHz for the target, a 23.1% reduction in upper output frequency.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADF4360-6BCPZ

✅ ड्रॉप-इन
📦 24-terminal WFQFN exposed-pad CSP
Different RF frequency band and divider plan; the target reaches 1.95 GHz while the alternative is optimized for a lower-frequency band.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADF4360-0

✅ ड्रॉप-इन
📦 24-terminal WFQFN exposed-pad CSP
Center frequency is 2600 MHz versus 1750 MHz for the target, a 48.6% increase; RF band and external network must be redesigned.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADF4360-3BCPZRL विशेषताएं

Device Type Fully integrated integer-N synthesizer and voltage-controlled oscillator
Center Frequency 1750 MHz
RF Output Frequency Range 1500 MHz to 1950 MHz
Divide-by-2 RF Output Range 800 MHz to 975 MHz
Lowest VCO Output Frequency 65 MHz
Highest VCO Output Frequency 400 MHz
Power Supply Range 3.0 V to 3.6 V
Logic Compatibility 1.8 V
Control Interface 3-wire serial interface
Synthesizer Architecture Integer-N
Output Power Programmable
Lock Detection Digital lock detect
Power-Down Modes Hardware and software power-down
पैकेज 24-terminal WFQFN exposed-pad CSP
Package Pin Count 24 pins
माउंटिंग प्रकार Surface mount
Shipping Package Tape and reel

ADF4360-3BCPZRL tape and reel पिन कॉन्फ़िगरेशन गाइड

ADF4360-3BCPZRL (tape and reel पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ADF4360-3BCPZRL के लिए tape and reel पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADF4360-3BCPZRL.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADF4360-3BCPZRL के लिए उपयुक्त है 6 अनुप्रयोगs: 1.8 GHz RF Local Oscillator, Wireless Communication Test Equipment, Frequency Hopping Radio, Microwave Signal Generator, Industrial RF Monitoring, Telecom and Microwave Subsystems.

🌐

1.8 GHz RF Local Oscillator

The ADF4360-3BCPZRL is suitable for generating an RF local-oscillator signal in the 1500 MHz to 1950 MHz range. Its integrated integer-N PLL and VCO consolidate reference synthesis, frequency division, and RF generation into a single 24-terminal WFQFN exposed-pad device. Designers can configure the output path, divider ratios, and programmable output power through the 3-wire serial interface. The divide-by-2 path also supports 800 MHz to 975 MHz operation when a lower-frequency drive is needed. In a transceiver, the practical benefit is reduced synthesizer component count, although phase noise and spurious performance remain strongly dependent on the reference source, loop filter, resonator network, and PCB isolation.

🖥️

Wireless Communication Test Equipment

The ADF4360-3BCPZRL can serve as the RF signal source in wireless communication test equipment operating across the 1500 MHz to 1950 MHz band. Programmable output power makes it possible to set the delivered RF level for receiver sensitivity, gain, and intermodulation measurements without changing the external signal path. Its digital lock-detect output can also support automated test sequences by confirming that the PLL has acquired lock. Because the architecture is integer-N, the instrument designer must select a reference and divider plan that produces the required frequencies with acceptable phase noise and spur performance. The compact exposed-pad package also supports instrument designs where front-panel space is constrained.

📱

Frequency Hopping Radio

The ADF4360-3BCPZRL is appropriate for frequency-hopping radio systems requiring rapid digital control of an RF carrier in the 1500 MHz to 1950 MHz range. The 3-wire serial register interface allows a host controller to update the synthesizer configuration as channels change, while programmable output power can support transmit-level control. The integrated VCO and integer-N feedback architecture reduce the number of discrete frequency-generation components on the radio board. System designers should still budget settling time, channel spacing, reference stability, and loop-filter bandwidth. Good supply decoupling and a quiet reference source are essential for repeatable lock behavior and low close-in phase noise across the operating band.

📡

Microwave Signal Generator

The ADF4360-3BCPZRL can form the core RF oscillator section of a compact microwave signal generator covering 1500 MHz to 1950 MHz. Its on-chip VCO, programmable RF output level, and digital lock indication simplify control of the source, while the exposed thermal pad provides a direct path for heat removal into the PCB ground plane. A production-quality generator still requires careful reference selection, loop-filter design, calibration, and output-level compensation. The synthesized carrier should also be filtered or combined with a modulation path according to the intended measurement bandwidth. The device's 3.0 V to 3.6 V supply requirement and 1.8 V-compatible interface support integration with contemporary control hardware.

🏭

Industrial RF Monitoring

The ADF4360-3BCPZRL can provide a controllable RF excitation or local oscillator in industrial monitoring equipment that operates in the 1500 MHz to 1950 MHz region. Programmable output power helps maintain usable signal levels across different sensor paths, while the digital lock-detect feature permits the controller to identify loss of PLL lock and trigger a fault state. The integrated synthesizer reduces board area compared with separate VCO and divider assemblies. For reliable operation, the design should include local decoupling near the supply terminals, a low-impedance ground plane under the exposed pad, and controlled reference routing. RF trace geometry and the external resonator network require attention because component tolerances can shift output frequency and matching behavior.

🌐

Telecom and Microwave Subsystems

The ADF4360-3BCPZRL is well matched to telecom and microwave subsystem designs requiring an integrated frequency source in the upper-1-GHz range. Its 1500 MHz to 1950 MHz RF output, divide-by-2 option, programmable power, and 3-wire control interface support compact clock and local-oscillator sections. The WFQFN exposed-pad package reduces footprint compared with discrete synthesizer assemblies, but its thermal performance depends on adequate copper beneath the pad and controlled board-level airflow. Designers should separate sensitive reference and feedback paths from high-energy RF traces, use short ground returns, and verify loop stability across temperature. Frequency planning must account for the integer-N relationship between the reference and synthesized output.

What is the ADF4360-3BCPZRL?
The ADF4360-3BCPZRL is a fully integrated integer-N PLL frequency synthesizer with an on-chip VCO from Analog Devices. According to the manufacturer's ADF4360-3 product page, it provides a 1500 MHz to 1950 MHz RF output range, a divide-by-2 option, and a 3-wire serial interface. It is packaged in a 24-terminal WFQFN exposed-pad device for compact RF and microwave designs.
What output frequency range does ADF4360-3BCPZRL provide?
The ADF4360-3BCPZRL provides a 1500 MHz to 1950 MHz RF output range. The manufacturer describes a 1750 MHz center frequency and an additional divide-by-2 output covering 800 MHz to 975 MHz. The internal VCO itself operates from 65 MHz to 400 MHz, with the external resonator network and frequency-multiplication arrangement determining the final RF range.
Where can I download the ADF4360-3BCPZRL datasheet PDF?
Download the ADF4360-3 datasheet from the official Analog Devices product page at https://www.analog.com/en/products/adf4360-3.html. The manufacturer documentation contains the register map, electrical characteristics, pin descriptions, application information, and reference circuit guidance. Use the pin-description table and package drawing from that document when creating the PCB footprint and assigning tracks.
Where is the pinout for ADF4360-3BCPZRL?
The ADF4360-3BCPZRL pinout is published in the pin-description table of the Analog Devices ADF4360-3 datasheet. The device uses a 24-terminal WFQFN exposed-pad package with a ground-connected thermal pad. Assign every terminal from the manufacturer table rather than inferring names from a similar member of the ADF4360 family.
What are the key specifications of ADF4360-3BCPZRL that engineers should know?
The key specifications are a 1500 MHz to 1950 MHz RF output range, a 1750 MHz center frequency, 3.0 V to 3.6 V analog supply operation, 1.8 V-compatible logic, and a 24-terminal WFQFN exposed-pad package. The ADF4360-3 also combines an integer-N PLL, integrated VCO, programmable output power, digital lock detection, and 3-wire serial programming.
What supply voltage and logic level does ADF4360-3BCPZRL use?
The ADF4360-3BCPZRL operates from a 3.0 V to 3.6 V analog power supply and supports 1.8 V-compatible digital logic. According to the manufacturer product description, the 3-wire serial interface controls the synthesizer registers. Confirm absolute maximum and recommended operating conditions in the datasheet before designing the supply rails.
Is ADF4360-3BCPZRL suitable for RF transceiver local oscillators?
The ADF4360-3BCPZRL is suitable for RF transceiver local oscillators requiring an output in the 1500 MHz to 1950 MHz band. Its integrated PLL and VCO reduce external frequency-generation circuitry, while programmable output power and lock detection support practical RF signal-chain integration. Final suitability also depends on phase noise, spur performance, reference quality, and loop-filter design.
How do I program the ADF4360-3BCPZRL?
Program the ADF4360-3BCPZRL through its 3-wire serial interface. The interface writes configuration registers that control the reference divider, feedback divider, RF output path, output power, lock detection, and power state. Follow the register-map sequence and required write timing in the Analog Devices datasheet, and verify the result by reading back the registers and checking the digital lock signal.
What is the difference between ADF4360-3BCPZRL and ADF4360-4BCPZRL7?
The principal difference is the RF frequency band. The ADF4360-3BCPZRL supports 1500 MHz to 1950 MHz RF output, while the ADF4360-4 family is centered at 1750 MHz with a 1.75 GHz RF range. Both use the same 24-terminal exposed-pad package family and related programming architecture, but an ADF4360-4 may require different divider settings and external RF network values.
What is the difference between ADF4360-3BCPZRL and ADF4360-7BCPZRL?
The ADF4360-3BCPZRL supports a 1500 MHz to 1950 MHz RF output range, whereas the ADF4360-7 is identified by a 1.8 GHz RF output range in the manufacturer-linked catalog data. The ADF4360-7 also uses external inductors to set its VCO frequency. The devices share a 24-terminal WFQFN exposed-pad format, but their RF networks and operating ranges differ.
When should I choose ADF4360-3BCPZRL over ADF4360-7BCPZRL?
Choose ADF4360-3BCPZRL when the required RF output falls within 1500 MHz to 1950 MHz and the external resonator network can be optimized for that band. Choose ADF4360-7BCPZRL for its distinct 1.8 GHz operating range. Although both use a 24-terminal WFQFN exposed-pad package, frequency coverage, divider settings, external inductance, and calibration requirements must be reviewed before substitution.
Is ADF4360-3BCPZRL the same as ADF4360-1BCPRL7?
No, the ADF4360-3BCPZRL and ADF4360-1BCPRL7 serve different RF frequency ranges. The ADF4360-3 is intended for 1500 MHz to 1950 MHz output, while the ADF4360-1 is a lower-frequency member of the synthesizer family. Shared family construction and similar package dimensions do not make their operating bands or external RF networks interchangeable.
What can replace ADF4360-3BCPZRL?
The closest documented replacements are other Analog Devices ADF4360 family members with the same 24-terminal WFQFN exposed-pad format, including ADF4360-4BCPZRL7 and ADF4360-7BCPZRL. They are pin-compatible at the package level but operate in different frequency bands, so replacement requires revalidation of divider settings, the resonator network, RF output range, and board-level performance.
Where can I buy ADF4360-3BCPZRL and check current price?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and order quantity for ADF4360-3BCPZRL. The form is the appropriate route for a live commercial quotation and avoids presenting a stale catalog price as current. Confirm the exact 24-terminal WFQRN exposed-pad ordering code when placing the request.
What is the lead time for ADF4360-3BCPZRL?
The current lead time for ADF4360-3BCPZRL should be requested through the Request a Quote form on this page. Lead time can change with manufacturer inventory, lot availability, order quantity, and package form, so it should be confirmed for the current production schedule rather than copied from an old catalog record. Include the required quantity and intended reel format with the request.
Is ADF4360-3BCPZRL in stock?
The current stock status for ADF4360-3BCPZRL should be confirmed through the Request a Quote form on this page. Real-time inventory depends on quantity, package form, and manufacturer or authorized-channel availability. The 24-terminal WFQFN exposed-pad ordering code and requested quantity should be included for an accurate allocation response.

के लिए इंजीनियरिंग संदर्भ डेटा ADF4360-3BCPZRL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ADF4360-3BCPZRL when the RF carrier falls within 1500 MHz to 1950 MHz and the design benefits from an integrated integer-N PLL and VCO. ADF4360-4BCPZRL7 is the closest documented family option for requirements centered below 1750 MHz, while ADF4360-7BCPZRL is relevant to a distinct 1.8 GHz external-inductor design. ADF4360-1BCPRL7 serves a lower frequency band, and ADF4360-0 is optimized around 2600 MHz. All listed alternatives use the 24-terminal WFQFN exposed-pad format, but a board-level substitution still requires revision of divider settings, RF output matching, resonator values, calibration, and frequency planning. Final selection should be based on the required output band, reference frequency, phase-noise and spur targets, lock time, supply architecture, and regulatory constraints.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADF4360-4BCPZRL7 ADF4360-7BCPZRL ADF4360-1BCPRL7 ADF4360-6BCPZ ADF4360-0
Package 24-terminal WFQFN exposed-pad CSP 24-terminal WFQFN exposed-pad CSP 24-terminal WFQFN exposed-pad CSP 24-terminal WFQFN exposed-pad CSP 24-terminal WFQFN exposed-pad CSP 24-terminal WFQFN exposed-pad CSP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Device Architecture Integrated integer-N synthesizer and VCO Integrated integer-N synthesizer and VCO Integrated integer-N synthesizer and VCO Integrated synthesizer and VCO Integrated synthesizer and VCO Integrated integer-N synthesizer and VCO

मुख्य विशेषताएँ

  • Higher upper RF output frequency than the ADF4360-4 option (बनामADF4360-4BCPZRL7)
  • Broader target RF range than the ADF4360-1 option (बनामADF4360-1BCPRL7)
  • Lower center frequency than the ADF4360-0 member (बनामADF4360-0)

डिज़ाइन नोट्स

Place the reference components, RF resonator network, loop-filter parts, and supply bypass capacitors close to their associated pins. Keep the reference and feedback routes short, preserve a continuous ground return, and avoid routing sensitive control or feedback nets beneath the RF output path. Use the manufacturer pin-description table and exposed-pad layout guidance when defining the land pattern.

Provide a solid ground-plane connection beneath the exposed pad and use multiple thermal vias where PCB construction permits. The exposed pad is a principal heat-dissipation path for this surface-mount clock-and-timing IC. Check the package thermal data against the actual PCB copper area and ambient temperature, then distribute any regulator heat and avoid placing the device beside a high-temperature component.

Treat the reference input and RF output as high-quality controlled-impedance routes, and keep the loop filter close to the synthesizer pins to reduce susceptibility to coupling. Proper RF grounding and impedance matching around the output network are necessary to preserve output power and minimize unintended harmonics. Validate the final network with the selected divider settings and reference frequency rather than relying only on nominal component values.

Do not assume that a family member with the same package is a functional substitute without reviewing its frequency range, external inductance, divider settings, and register configuration. A regulator can remain nominally locked yet produce unsuitable phase noise or spurs if the reference, loop filter, supply network, or output match is incorrect. Verify lock, output frequency, and spectral performance across temperature and load.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The current manufacturer product page and catalog excerpts do not provide explicit compliance declarations for this exact ordering code.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADF4360-3BCPZRL datasheet ADF4360-3BCPZRL datasheet pdf ADF4360-3BCPZRL pinout ADF4360-3BCPZRL equivalent ADF4360-3BCPZRL replacement ADF4360-3BCPZRL price ADF4360-3BCPZRL stock Analog Devices ADF4360-3BCPZRL ADF4360-3BCPZRL 24 WFQFN ADF4360-3BCPZRL 1500 1950 MHz ADF4360-3BCPZRL RF oscillator ADF4360-3BCPZRL vs ADF4360-7BCPZRL

संबंधित कंपोनेंट्स और शब्द

Analog Devices ADF4360-3BCPZRL ADF4360-4BCPZRL7 ADF4360-7BCPZRL ADF4360-1BCPRL7 ADF4360-6BCPZ ADF4360-0 integer-N frequency synthesizer phase-locked loop PLL voltage-controlled oscillator VCO RF clock generator frequency divider 3-wire serial interface digital lock detect programmable output power 24-terminal WFQFN exposed-pad CSP surface-mount technology SMD package phase noise loop filter reference oscillator 1500 MHz to 1950 MHz RF output integer-N PLL
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें