ADF4360-3BCPZRL - 1.95 GHz Integer-N PLL with VCO | Analog Devices
N.º da peça: ADF4360-3BCPZRL ✓ AtivoADF4360-3BCPZRL Visão geral
An integer-N frequency synthesizer generates a stable output phase-locked to a reference oscillator. The PLL compares divided feedback with the reference signal, while the integrated VCO supplies the variable-frequency output. The ADF4360-3 family is designed around a 1750 MHz center frequency and also provides a divide-by-2 output option. A 3-wire serial interface programs frequency, divider ratios, output power, and operating functions.
Key characteristics include a 3.3 V analog supply range of 3.0 V to 3.6 V, 1.8 V logic compatibility, programmable RF output power, a digital lock-detect function, and hardware or software power-down modes. The 1500 MHz to 1950 MHz operating range makes the device suitable for RF transceivers, wireless infrastructure, test equipment, and frequency-hopping systems.
The device uses an integer-N architecture rather than a fractional-N feedback divider. This simplifies frequency planning and control, but the achievable output frequency and phase-noise performance depend on the reference frequency, loop filter, PFD settings, output division, and printed-circuit-board implementation. Integer-N synthesizers are particularly suitable where a clean integer relationship between reference and output frequency simplifies calibration.
Typical uses include 1.5 GHz to 1.95 GHz RF signal generation, local-oscillator synthesis, communication test equipment, and microwave subsystem clocking. The ADF4360-3BCPZRL is also a sensible choice when board area must be minimized because the PLL, VCO, dividers, and control interface share one exposed-pad package.
Layout quality is critical in an integrated VCO and PLL. Place the loop-filter components, reference components, supply bypass capacitors, and decoupling network close to their associated pins. Use a continuous ground reference beneath the exposed pad, provide low-impedance supply connections, and keep sensitive feedback and control traces short and isolated from high-current switching paths.
This product summary combines the manufacturer's functional description, package information, operating limits, pin-function guidance, interface details, and practical RF layout considerations into an engineering-oriented reference for component selection, schematic capture, PCB implementation, and system bring-up.
Alternativas drop-in para ADF4360-3BCPZRL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADF4360-3BCPZRL (mesmo formato e footprint) — diferindo em Package, Device Type, Divide-by-2 Output Range, Power-Down Modes, Product Type.
ADF4360-4BCPZRL7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADF4360-7BCPZRL
✅ Drop-InConsulte o preço
Ver ficha técnica →ADF4360-1BCPRL7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADF4360-6BCPZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADF4360-0
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADF4360-3BCPZRL Especificações
| Device Type | Fully integrated integer-N synthesizer and voltage-controlled oscillator |
| Center Frequency | 1750 MHz |
| RF Output Frequency Range | 1500 MHz to 1950 MHz |
| Divide-by-2 RF Output Range | 800 MHz to 975 MHz |
| Lowest VCO Output Frequency | 65 MHz |
| Highest VCO Output Frequency | 400 MHz |
| Power Supply Range | 3.0 V to 3.6 V |
| Logic Compatibility | 1.8 V |
| Control Interface | 3-wire serial interface |
| Synthesizer Architecture | Integer-N |
| Output Power | Programmable |
| Lock Detection | Digital lock detect |
| Power-Down Modes | Hardware and software power-down |
| Encapsulamento | 24-terminal WFQFN exposed-pad CSP |
| Package Pin Count | 24 pins |
| Tipo de montagem | Surface mount |
| Shipping Package | Tape and reel |
Guia de Configuração de Pinos do ADF4360-3BCPZRL tape and reel
Configuração de pinos para ADF4360-3BCPZRL (pacote tape and reel). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADF4360-3BCPZRL.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADF4360-3BCPZRL é adequado para 6 aplicaçãos: 1.8 GHz RF Local Oscillator, Wireless Communication Test Equipment, Frequency Hopping Radio, Microwave Signal Generator, Industrial RF Monitoring, Telecom and Microwave Subsystems.
1.8 GHz RF Local Oscillator
The ADF4360-3BCPZRL is suitable for generating an RF local-oscillator signal in the 1500 MHz to 1950 MHz range. Its integrated integer-N PLL and VCO consolidate reference synthesis, frequency division, and RF generation into a single 24-terminal WFQFN exposed-pad device. Designers can configure the output path, divider ratios, and programmable output power through the 3-wire serial interface. The divide-by-2 path also supports 800 MHz to 975 MHz operation when a lower-frequency drive is needed. In a transceiver, the practical benefit is reduced synthesizer component count, although phase noise and spurious performance remain strongly dependent on the reference source, loop filter, resonator network, and PCB isolation.
Recomendado
Wireless Communication Test Equipment
The ADF4360-3BCPZRL can serve as the RF signal source in wireless communication test equipment operating across the 1500 MHz to 1950 MHz band. Programmable output power makes it possible to set the delivered RF level for receiver sensitivity, gain, and intermodulation measurements without changing the external signal path. Its digital lock-detect output can also support automated test sequences by confirming that the PLL has acquired lock. Because the architecture is integer-N, the instrument designer must select a reference and divider plan that produces the required frequencies with acceptable phase noise and spur performance. The compact exposed-pad package also supports instrument designs where front-panel space is constrained.
Recomendado
Frequency Hopping Radio
The ADF4360-3BCPZRL is appropriate for frequency-hopping radio systems requiring rapid digital control of an RF carrier in the 1500 MHz to 1950 MHz range. The 3-wire serial register interface allows a host controller to update the synthesizer configuration as channels change, while programmable output power can support transmit-level control. The integrated VCO and integer-N feedback architecture reduce the number of discrete frequency-generation components on the radio board. System designers should still budget settling time, channel spacing, reference stability, and loop-filter bandwidth. Good supply decoupling and a quiet reference source are essential for repeatable lock behavior and low close-in phase noise across the operating band.
Recomendado
Microwave Signal Generator
The ADF4360-3BCPZRL can form the core RF oscillator section of a compact microwave signal generator covering 1500 MHz to 1950 MHz. Its on-chip VCO, programmable RF output level, and digital lock indication simplify control of the source, while the exposed thermal pad provides a direct path for heat removal into the PCB ground plane. A production-quality generator still requires careful reference selection, loop-filter design, calibration, and output-level compensation. The synthesized carrier should also be filtered or combined with a modulation path according to the intended measurement bandwidth. The device's 3.0 V to 3.6 V supply requirement and 1.8 V-compatible interface support integration with contemporary control hardware.
Recomendado
Industrial RF Monitoring
The ADF4360-3BCPZRL can provide a controllable RF excitation or local oscillator in industrial monitoring equipment that operates in the 1500 MHz to 1950 MHz region. Programmable output power helps maintain usable signal levels across different sensor paths, while the digital lock-detect feature permits the controller to identify loss of PLL lock and trigger a fault state. The integrated synthesizer reduces board area compared with separate VCO and divider assemblies. For reliable operation, the design should include local decoupling near the supply terminals, a low-impedance ground plane under the exposed pad, and controlled reference routing. RF trace geometry and the external resonator network require attention because component tolerances can shift output frequency and matching behavior.
Recomendado
Telecom and Microwave Subsystems
The ADF4360-3BCPZRL is well matched to telecom and microwave subsystem designs requiring an integrated frequency source in the upper-1-GHz range. Its 1500 MHz to 1950 MHz RF output, divide-by-2 option, programmable power, and 3-wire control interface support compact clock and local-oscillator sections. The WFQFN exposed-pad package reduces footprint compared with discrete synthesizer assemblies, but its thermal performance depends on adequate copper beneath the pad and controlled board-level airflow. Designers should separate sensitive reference and feedback paths from high-energy RF traces, use short ground returns, and verify loop stability across temperature. Frequency planning must account for the integer-N relationship between the reference and synthesized output.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADF4360-3BCPZRL — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADF4360-4BCPZRL7 | ADF4360-7BCPZRL | ADF4360-1BCPRL7 | ADF4360-6BCPZ | ADF4360-0 |
|---|---|---|---|---|---|---|
| Package | 24-terminal WFQFN exposed-pad CSP | 24-terminal WFQFN exposed-pad CSP | 24-terminal WFQFN exposed-pad CSP | 24-terminal WFQFN exposed-pad CSP | 24-terminal WFQFN exposed-pad CSP | 24-terminal WFQFN exposed-pad CSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Architecture | Integrated integer-N synthesizer and VCO | Integrated integer-N synthesizer and VCO | Integrated integer-N synthesizer and VCO | Integrated synthesizer and VCO | Integrated synthesizer and VCO | Integrated integer-N synthesizer and VCO |
Principais diferenciais
- Higher upper RF output frequency than the ADF4360-4 option (vs ADF4360-4BCPZRL7)
- Broader target RF range than the ADF4360-1 option (vs ADF4360-1BCPRL7)
- Lower center frequency than the ADF4360-0 member (vs ADF4360-0)
Notas de projeto
Place the reference components, RF resonator network, loop-filter parts, and supply bypass capacitors close to their associated pins. Keep the reference and feedback routes short, preserve a continuous ground return, and avoid routing sensitive control or feedback nets beneath the RF output path. Use the manufacturer pin-description table and exposed-pad layout guidance when defining the land pattern.
Provide a solid ground-plane connection beneath the exposed pad and use multiple thermal vias where PCB construction permits. The exposed pad is a principal heat-dissipation path for this surface-mount clock-and-timing IC. Check the package thermal data against the actual PCB copper area and ambient temperature, then distribute any regulator heat and avoid placing the device beside a high-temperature component.
Treat the reference input and RF output as high-quality controlled-impedance routes, and keep the loop filter close to the synthesizer pins to reduce susceptibility to coupling. Proper RF grounding and impedance matching around the output network are necessary to preserve output power and minimize unintended harmonics. Validate the final network with the selected divider settings and reference frequency rather than relying only on nominal component values.
Do not assume that a family member with the same package is a functional substitute without reviewing its frequency range, external inductance, divider settings, and register configuration. A regulator can remain nominally locked yet produce unsuitable phase noise or spurs if the reference, loop filter, supply network, or output match is incorrect. Verify lock, output frequency, and spectral performance across temperature and load.
Informações de conformidade
The current manufacturer product page and catalog excerpts do not provide explicit compliance declarations for this exact ordering code.