Texas Instruments

ADS7813PB - 16-Bit 40kHz SAR ADC | Texas Instruments

MPN: ADS7813PB ✓ सक्रिय
Single +5 V Vdss 16-pin PDIP, 0.3 inch Package Internal or external Speed
न्यूनतम ऑर्डर मात्रा: 1 |

ADS7813PB अवलोकन

The Texas Instruments ADS7813PB is a low-power, 16-bit successive-approximation analog-to-digital converter with one analog input, a 40 kSPS sampling rate, and a 16-pin PDIP package. It operates from a single +5 V supply and supports an internal or external clock through a flexible SPI-compatible serial interface.

An ADC is an interface device that converts a continuously varying analog voltage into a numerical value for processing by a microcontroller, digital signal processor, or industrial controller. The ADS7813 belongs to the successive-approximation, or SAR, ADC family within the broader data-acquisition and signal-conversion hierarchy. Its sampling architecture is appropriate for industrial measurement, instrumentation, control, and embedded systems that require higher resolution than a conventional 8-bit or 12-bit converter.

Key characteristics include 16-bit resolution, 40 kSPS conversion throughput, ±2.0 LSB maximum integral nonlinearity, and at least 87 dB SINAD. The single +5 V supply simplifies system power planning, while the serial interface reduces the number of data lines required on a circuit board. The converter also uses either an internal or external clock, allowing the system designer to synchronize conversion timing with a local microcontroller or peripheral.

The serial interface can operate with an internal or external clock and is described by Texas Instruments as SPI compatible. The ADS7813PB uses a 0.3-inch 16-pin plastic DIP package, which supports through-hole assembly and prototyping. A maximum conversion time of 20 microseconds establishes the basic acquisition-rate limit before system overhead and conversion-control requirements are considered.

Typical applications include process-control instrumentation, pressure and temperature measurement, laboratory data acquisition, industrial sensor interfaces, and embedded control systems. The 16-bit resolution preserves small changes in analog input, while the 40 kSPS rate is sufficient for many slowly changing sensor signals. It is not intended for high-bandwidth waveform capture requiring substantially higher sampling rates.

Design the input network to keep the analog signal within the converter's permitted input range, and follow the manufacturer datasheet when assigning digital signal timing and grounding. Use a stable reference arrangement, adequate bypass capacitance, and clean layout between the analog input, reference, digital interface, and supply pins. Verify acquisition timing with the external-clock option when deterministic system sampling is required.

के लिए ड्रॉप-इन विकल्प ADS7813PB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADS7813PB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Mounting Type, Architecture, Input Type, Operating Temperature Range.

Texas Instruments
Package: 16-pin DIP, 0.3 inch
Architecture: Capacitor-based SAR with sample-and-hold
Input Type: Single-ended
इसके साथ तुलना करें ADS7813PB →
Texas Instruments
Package: 16-SOIC (DW)
Mounting Type: Surface Mount
Architecture: SAR (Successive Approximation)

ADS7813PBG4

✅ ड्रॉप-इन
📦 PDIP-16
Same 16-bit, 40 kSPS ADS7813 function and PDIP-16 package; the G4 grade designation may change ordering limits, so qualification details require confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7813P

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 PDIP-16
Successive-approximation register (SAR) ADC · 16 bit · 40 kSPS · 20 us · 1 channel · Single-ended · +5 V · +/-10 V, +/-5 V, 0 V to 10 V, and 0.5 V to 4.5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS7812PB

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 PDIP-16
Same PDIP-16 pin-compatible SAR ADC and 20 us maximum conversion time, but resolution is 12 bit versus 16 bit, a 25% reduction.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7811PB

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 PDIP-16
Same family, SAR architecture, and PDIP-16 format; resolution is 12 bit versus 16 bit, a 25% reduction, so conversion-code and timing checks are required.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7813PB Maximum Ratings और Electrical Characteristics

ADC Type Successive Approximation (SAR)
रेज़ोल्यूशन 16 bit
Number of Input Channels 1 channel
सैंपलिंग रेट 40 kSPS
Maximum Conversion Time 20 us
सप्लाई वोल्टेज Single +5 V
Integral Nonlinearity ±2.0 LSB maximum
Signal-to-Noise and Distortion 87 dB minimum
ऑपरेटिंग तापमान रेंज -40°C to +85°C
Serial Interface SPI compatible
Clock Source Internal or external
पैकेज 16-pin PDIP, 0.3 inch
पिन काउंट 16 pins
माउंटिंग प्रकार Through-hole
Technology CMOS
Product Type Low-power sampling analog-to-digital converter

ADS7813PB 16-pin pdip, 0.3 inch पिन कॉन्फ़िगरेशन गाइड

ADS7813PB (16-pin pdip, 0.3 inch पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

ADS7813PB के लिए 16-pin pdip, 0.3 inch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS7813PB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADS7813PB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Process Measurement, Laboratory Data Acquisition, Precision Sensor Interface, Embedded Control Systems, Automated Test Equipment, Low-Power Monitoring Panel.

🏭

Industrial Process Measurement

ADS7813PB fits industrial process measurement because its 16-bit resolution can preserve small voltage changes produced by pressure, level, or temperature sensors. The 40 kSPS conversion rate is more than adequate for process variables that evolve over milliseconds rather than requiring high-speed waveform capture. Place the converter between the conditioned sensor signal and a controller, using a stable reference and a single +5 V analog supply. Compared with an 8-bit or 12-bit converter, the 16-bit result offers four additional bits of resolution and can reduce quantization uncertainty by a factor of 16. The -40°C to +85°C operating range also supports equipment deployed across industrial temperature zones.

🖥️

Laboratory Data Acquisition

For laboratory instrumentation, ADS7813PB provides a useful balance between resolution, throughput, and interface simplicity. A 16-bit result supports precise recording of slowly varying or moderate-bandwidth analog signals, while the 40 kSPS rate permits repeated acquisition faster than the stated 20 us maximum conversion time. Its SPI-compatible serial interface reduces the number of wiring connections and can synchronize with an external clock when deterministic acquisition timing is important. Use a low-noise reference and careful grounding to ensure that system accuracy is not limited by the analog front end or reference network.

🧩

Precision Sensor Interface

ADS7813PB is suitable for conditioning and digitizing outputs from slow, high-resolution sensors such as strain, pressure, and temperature elements. The converter's 16-bit resolution captures changes that may occupy only a small portion of the full-scale input range, while its 40 kSPS throughput supports periodic polling without requiring a high-speed ADC. Implement the sensor, analog filter, ADC, and digital controller on the same measurement board to minimize interference. Pay particular attention to reference stability, input settling, and separating analog return paths from digital clock and serial-data traces.

⚡

Embedded Control Systems

ADS7813PB can serve as the measurement front end in an embedded controller that needs more analog resolution than a typical low-cost converter. Its single +5 V supply simplifies integration with digital control circuitry, and the flexible SPI-compatible interface can use an internal or external clock to coordinate acquisition with control software. The 16-bit output provides fine numerical granularity for closed-loop adjustments, while 40 kSPS is suitable for many supervisory and slow-loop feedback functions. Validate digital timing, settling behavior, and reference accuracy in the final controller board because firmware configuration and PCB routing materially affect realized performance.

🔧

Automated Test Equipment

ADS7813PB can serve as the sampling element in automated test equipment that measures modest analog outputs with useful numeric granularity. Its 16-bit resolution improves the visibility of small deviations from a nominal value, and the 40 kSPS rate supports rapid repeated measurements when the test does not demand high-frequency sampling. The serial interface reduces board-space requirements compared with a parallel-output converter. For production-test accuracy, use the external-clock mode where deterministic start timing is required, and ensure the reference remains stable between measurements. Board-level calibration should account for offset, gain, and noise at the operating temperature.

📺

Low-Power Monitoring Panel

ADS7813PB works in monitoring panels where multiple analog channels are sampled sequentially under centralized control. Although it has one analog input, its 40 kSPS conversion rate allows one multiplexed input to be updated much faster than many temperature, voltage, or status signals change. The 16-bit resolution can improve display and thresholding precision, while the single +5 V supply supports compact embedded designs. Use the external-clock capability when multiple monitored values must be acquired on a predictable schedule. Pay attention to channel-switching transients, input settling time, and return-current paths to prevent neighboring channels from introducing errors.

अनुशंसित उत्पादों का सारांश

ADS7813PBG4 Same-family 16-pin PDIP ADC option for controlled design variants उपयोग में: Industrial Process Measurement, Laboratory Data Acquisition, Embedded Control Systems, Automated Test Equipment ADS7813P Texas Instruments उपयोग में: Industrial Process Measurement, Precision Sensor Interface, Embedded Control Systems, Low-Power Monitoring Panel ADS7812PB Pin-compatible lower-resolution ADC option उपयोग में: Laboratory Data Acquisition, Automated Test Equipment ADS7811PB Pin-compatible reduced-resolution family option उपयोग में: Precision Sensor Interface, Low-Power Monitoring Panel
What is the ADS7813PB?
The ADS7813PB is a Texas Instruments low-power, 16-bit, single-channel SAR analog-to-digital converter in a 16-pin PDIP package. According to the manufacturer product page, it operates from a single +5 V supply, supports an internal or external clock, and uses a flexible SPI-compatible serial interface. Its 40 kSPS conversion rate is suited to precision instrumentation, industrial measurement, sensor acquisition, and embedded control systems.
What is the sampling rate and resolution of ADS7813PB?
The ADS7813PB provides 16-bit resolution at a sampling rate of 40 kSPS. According to the Texas Instruments ADS7813 product information, conversion time is no more than 20 microseconds. These figures make the device appropriate for slowly changing or moderate-bandwidth analog signals, including process-control measurements and laboratory instrumentation, rather than high-speed waveform capture.
What is the power supply requirement for ADS7813PB?
The ADS7813PB operates from a single +5 V supply. The Texas Instruments product page identifies the converter as a low-power, single-supply device, simplifying analog and digital power distribution compared with a converter requiring separate positive and negative rails. Follow the manufacturer datasheet for bypass-capacitor values, supply sequencing, grounding, and the relationship between supply voltage and logic levels.
What is the operating temperature range of ADS7813PB?
The ADS7813PB is specified over a -40°C to +85°C operating-temperature range. The Texas Instruments product information specifically identifies this range for the 40 kSPS sampling-rate specification. For designs operating near the limits, account for thermal conditions at the device, verify conversion accuracy across temperature, and use layout practices that reduce temperature gradients and supply noise.
Where can I download the ADS7813PB datasheet PDF?
The official ADS7813PB datasheet can be accessed from the Texas Instruments ADS7813 product page at https://www.ti.com/product/ADS7813. Use the manufacturer's document for the complete ordering table, electrical characteristics, pin-description table, timing diagrams, reference configuration, and application guidance. The product-page search phrase “ADS7813PB datasheet PDF” also leads to third-party copies, but the TI document is the appropriate authoritative reference.
Where can I find the ADS7813PB pinout?
The ADS7813PB pin assignments are shown in the pin-description table of the Texas Instruments ADS7813 datasheet. The commercial ordering code identifies a 16-pin, 0.3-inch PDIP package. Use the package drawing and pin table together when assigning analog input, reference, supply, clock, and serial-data nets; do not infer connections from a generic 16-pin DIP outline.
What is the difference between ADS7813PB and ADS7813PBG4?
Both ADS7813PB and ADS7813PBG4 use the same 16-pin PDIP format and implement the same 16-bit, 40 kSPS ADS7813 conversion function. The G4 ordering code identifies a different device grade or ordering configuration, so it should not be treated as an identical unqualified substitute without checking the manufacturer ordering table for voltage, temperature, marking, and qualification limits. Both can serve as the basis for a controlled replacement review.
When should I choose ADS7813PB over ADS7812PB?
Choose ADS7813PB when the design requires 16-bit conversion resolution, while ADS7812PB provides only 12-bit resolution and a maximum conversion time of 20 microseconds. The manufacturer datasheet identifies ADS7812 as pin-compatible with ADS7813, so the decision is primarily functional rather than footprint-driven. Select ADS7813PB when four additional bits of resolution materially improve measurement resolution.
Can ADS7813PB be used in a 5 V industrial measurement system?
Yes, ADS7813PB is suitable for many 5 V industrial measurement systems because it accepts a single +5 V supply and operates from -40°C to +85°C. Its 16-bit resolution can represent small sensor-voltage changes, while the 40 kSPS rate suits process variables that change on a millisecond scale. Input protection, isolation, grounding, reference stability, and safety requirements must be evaluated separately.
What is the best drop-in replacement for ADS7813PB?
ADS7813PBG4 is the closest same-package candidate identified in the cross-reference material because it is listed as a 16-pin PDIP ADS7813 variant. ADS7813P is another through-hole ordering option, while ADS7812PB offers pin compatibility but reduces resolution from 16 bits to 12 bits. No cross-brand drop-in replacement was established, so any substitution should be checked against the manufacturer datasheet and qualified through board-level testing.
What can replace ADS7813PB without changing the PCB?
ADS7813PBG4 and ADS7813P are same-family, through-hole candidates for an ADS7813PB replacement, while ADS7812PB is pin-compatible but limited to 12-bit resolution. The replacement must match the 16-pin PDIP footprint, supply requirements, clock behavior, and serial timing. Confirm the ordering details and verify the analog accuracy and digital interface on production hardware before approving the change.
Is ADS7813PB suitable for sensor and instrumentation applications?
The ADS7813PB is well matched to sensor and instrumentation applications that require more resolution than a 12-bit ADC but do not need megahertz-class sampling. Its 16-bit resolution, 40 kSPS rate, single +5 V supply, and -40°C to +85°C specification cover many pressure, temperature, position, and laboratory-acquisition channels. A low-reference-noise design and careful analog layout remain essential for accurate results.
ADS7813PB vs ADS7812PB — which is better for precision measurement?
ADS7813PB is better when maximum conversion resolution is the priority because it provides 16-bit output, compared with 12 bits from ADS7812PB. The ADS7812 is described as pin-compatible with ADS7813, making the footprint usable without changing the package arrangement. ADS7812PB can still be adequate when 12-bit resolution meets the measurement requirement and its conversion specifications satisfy the system.
Where to buy ADS7813PB online?
Use the Request a Quote form on this page to request ADS7813PB availability, lot traceability, delivery information, and an order quotation. The form keeps the request associated with the exact 16-pin PDIP ordering code rather than a similar package variant. The manufacturer product page is also the appropriate reference for current part documentation and lifecycle information.
What is the price of ADS7813PB?
The current commercial price for ADS7813PB should be obtained through the Request a Quote form on this page so the response can reflect the requested quantity and exact ordering code. No static price should be copied from this technical overview because market pricing changes and a lone unit price does not represent a usable quantity-break schedule. The form also allows clarification of packaging, traceability, and lead-time requirements.
What is the lead time and stock status for ADS7813PB?
Request the current ADS7813PB stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Stock can vary by exact suffix, quantity, and shipment destination, so a generic availability statement is not sufficient for production planning. Include your requested date and packaging requirements in the quotation request to obtain an actionable schedule.

के लिए इंजीनियरिंग संदर्भ डेटा ADS7813PB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ADS7813PB when the system needs 16-bit measurement resolution at up to 40 kSPS and can use a 16-pin PDIP footprint with a single +5 V supply. It is a strong fit for industrial sensors, laboratory instrumentation, and embedded control where four additional bits beyond a 12-bit converter materially improve measurement precision. Consider ADS7812PB when 12-bit resolution is sufficient and the same pin-compatible SAR architecture is acceptable; its four fewer bits provide a 16-fold reduction in nominal numerical resolution. ADS7811PB is another same-family, pin-compatible lower-resolution option when its timing and accuracy characteristics satisfy the design. Use ADS7813PBG4 or ADS7813P for controlled same-family ordering variants, but verify their complete electrical limits and qualification details before substitution. No cross-brand drop-in alternative was established, so a competitor part should not be selected solely from a generic parametric-similarity listing.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADS7813PBG4 ADS7813P ADS7812PB ADS7811PB
Package PDIP-16, 0.3 inch PDIP-16 PDIP-16 PDIP-16 PDIP-16
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

मुख्य विशेषताएँ

  • Higher conversion resolution within the same ADS7813 family (बनामADS7812PB)
  • Direct same-package family configuration (बनामADS7813PBG4)
  • Single +5 V operation with a flexible serial interface (बनामADS7811PB)

डिज़ाइन नोट्स

Route the analog input and reference connections away from serial clock, chip-select, and digital return paths. Keep the analog and digital grounds connected according to the manufacturer datasheet's recommended grounding scheme, and place bypass capacitors close to their associated supply pins. For a mixed-signal board, minimize copper area under high-impedance input and reference nets to reduce parasitic pickup and sensitivity to adjacent switching signals.

Use the external-clock mode when conversion start timing must be deterministic across acquisition cycles. Confirm setup and hold timing for CS, SCLK, SDI, and SDO from the manufacturer timing diagrams. If the controller and ADC share a ground reference through a cable or backplane, account for ground offset in the analog input range and avoid routing clock returns through sensitive input regions.

Do not assume that a 16-bit data width guarantees 16-bit usable measurement accuracy. The overall error also depends on the reference voltage, analog front-end noise, input settling, PCB contamination, and the conversion timing relative to the sample-and-hold interval. Verify the reference configuration and acquisition sequence in the manufacturer datasheet, and avoid changing the input range or switching network without repeating calibration and settling tests.

Estimated: a 40 kSPS conversion rate produces up to 40,000 conversions per second, but converter power cannot be calculated from that rate alone without the operating current. Measure current at the actual +5 V supply under the chosen clocking and conversion duty cycle. Use the manufacturer operating-current specification and application information to select bypass capacitance and ensure that the supply can support transient demand without disturbing adjacent analog circuitry.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product page and cited snippets do not state the requested compliance details. AEC-Q100 status is recorded as not_applicable because this ordering code is not identified as an automotive-qualified variant.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADS7813PB datasheet ADS7813PB pinout ADS7813PB datasheet pdf ADS7813PB specifications ADS7813PB schematic ADS7813PB footprint ADS7813PB equivalent ADS7813PB replacement ADS7813PB vs ADS7812PB Texas Instruments ADS7813PB ADS7813PB price ADS7813PB stock

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS7813 ADS7813PB ADS7813PBG4 ADS7813P ADS7812PB ADS7811PB analog-to-digital converter ADC successive-approximation ADC SAR ADC data acquisition SPI-compatible serial interface single-channel ADC 16-bit resolution 40 kSPS sampling rate single +5 V supply internal or external clock integral nonlinearity SINAD PDIP-16 through-hole package industrial instrumentation sensor interface precision measurement
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें