AKM

AK4101AVQ - Quad 192kHz 24-Bit Audio DIT | AKM

MPN: AK4101AVQ ✓ सक्रिय
44-pin LQFP (10 x 10 mm) Package
न्यूनतम ऑर्डर मात्रा: 1 |

AK4101AVQ अवलोकन

Asahi Kasei Microdevices/AKM AK4101AVQ is a four-output digital audio transmitter (DIT) for professional audio and digital audio equipment. It supports operation up to a 192 kHz sample rate with 24-bit audio data and provides four transmitter outputs. The device supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards, placing it in the digital audio interface hierarchy of audio codec, interface IC, and semiconductor.

A digital audio transmitter converts an internal digital audio stream into standards-compliant digital audio outputs for transmission or routing. The AK4101A family provides four output channels, allowing one transmitter IC to serve multichannel systems without requiring four separate single-output devices. Support for AES3 and IEC60958 is valuable in professional studio equipment, broadcast consoles, digital mixers, and format converters that exchange 24-bit digital audio over balanced digital connections.

The AK4101AVQ supports data rates corresponding to sample rates up to 192 kHz and 24-bit operation. Its four-output architecture consolidates multiple digital audio paths into one 44-LQFP package, potentially reducing board area and simplifying system-level routing compared with four discrete transmitter packages. The 44-pin LQFP uses a 0.8 mm pitch and is specified for temperatures from -40 °C to +85 °C, supporting industrial as well as commercial equipment.

The transmitter implements digital interface standards rather than analog-to-digital or digital-to-analog conversion. Consequently, its principal design considerations are input and output data timing, supported channel formats, clock and mode configuration, signal integrity across digital audio connections, and correct mapping of audio frames across the four outputs. These considerations are distinct from analog audio mixer and DAC designs, where converter resolution and analog signal integrity dominate device selection.

Typical applications include professional digital mixers, multichannel audio routing equipment, broadcast consoles, digital recording interfaces, sample-rate converters, and studio monitor systems. Four outputs allow several routed channels to share one transmitter package, provided that all attached receivers support the selected format and that the system channel map is configured consistently.

For PCB implementation, follow the manufacturer pin-description and application-circuit tables when assigning data, clock, control, and power pins. Preserve the recommended interface topology, provide adequate decoupling at the supply pins, and route high-speed digital audio signals with continuous reference planes. Confirm the selected output standard, master-clock relationship, channel mapping, and sample rate against the receiver connected to each output before releasing the production design.

This page consolidates the documented AK4101AVQ capabilities, standards support, package information, application context, and sourcing guidance into an engineering-focused product record. It also distinguishes verified device functions from parameters that require confirmation from the complete manufacturer datasheet or an application-specific design review.

के लिए ड्रॉप-इन विकल्प AK4101AVQ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

AK4101AVQ विशेषताएं

Product Type Four-output digital audio transmitter (DIT)
आउटपुट की संख्या 4 outputs
Maximum Sample Rate 192 kHz
Audio Word Length 24 bit
Supported Interface Standard AES3
Supported Interface Standard IEC60958
Supported Interface Standard S/PDIF
Supported Interface Standard EIAJ CP1201
पैकेज 44-pin LQFP (10 x 10 mm)
Package Pitch 0.8 mm
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C

AK4101AVQ 0.8 mm पिन कॉन्फ़िगरेशन गाइड

AK4101AVQ (0.8 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

AK4101AVQ के लिए 0.8 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AK4101AVQ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AK4101AVQ के लिए उपयुक्त है 6 अनुप्रयोगs: Professional Digital Audio Mixers, Broadcast Console Signal Routing, Digital Studio Monitor Systems, Multichannel Recording Interfaces, Sample-Rate Conversion Equipment, Digital Audio Format Routers.

🎧

Professional Digital Audio Mixers

The AK4101AVQ fits professional digital mixers that route several channels through one transmitter package. Its four outputs support operation up to a 192 kHz sample rate with 24-bit audio data, while AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface support covers several digital-audio connection requirements. Using one quad-output device can reduce the number of transmitter packages compared with four single-channel implementations. The designer must still map each output to the correct receiver format, synchronize the required clocks, and verify that the selected 192 kHz mode is supported by every connected destination.

🌐

Broadcast Console Signal Routing

The AK4101AVQ is appropriate for broadcast consoles that require several independently routed digital-audio outputs in a compact package. Four outputs, 192 kHz maximum sample-rate operation, and 24-bit data support accommodate high-resolution broadcast workflows, while the four documented interface standards provide flexibility for connecting studio and transmission equipment. The four-output arrangement can shorten board routing compared with separate single-output transmitters. Before layout approval, engineers should establish the channel map, required clock relationships, output standard for each receiver, and signal-integrity constraints imposed by the console backplane.

🎧

Digital Studio Monitor Systems

The AK4101AVQ can support digital studio-monitor systems in which several audio channels must be transmitted to powered monitors or digital audio receivers. Its four-output architecture allows four routed channels to share one device, while operation up to 192 kHz provides headroom for high-resolution monitoring formats. AES3, IEC60958, S/PDIF, and EIAJ CP1201 support gives the system designer several receiver-facing options. Practical implementation requires matching the transmitter configuration to each monitor input and checking master-clock, sample-rate, and cable-distance requirements before selecting passive and active interface components.

🖥️

Multichannel Recording Interfaces

The AK4101AVQ fits multichannel recording interfaces that distribute digital audio to external converters, synchronizers, or processing equipment. Four digital outputs can carry routed channels at rates up to 192 kHz and 24-bit resolution, reducing package count compared with four separate transmitters. Support for both professional and consumer-oriented digital-audio standards allows integration with a broader range of receivers, provided each output is configured for the correct format. Designers should use the manufacturer application guidance to confirm clock relationships, data-input format, control behavior, and the channel assignment used by the recording system.

🔧

Sample-Rate Conversion Equipment

The AK4101AVQ is applicable in sample-rate conversion and digital audio routing equipment that must distribute multiple converted channels to downstream receivers. Its four outputs and 192 kHz maximum sample-rate capability support high-resolution audio paths, while the available interface standards allow integration with equipment using different digital audio formats. Four independently routed outputs can simplify the physical output stage, but channel mapping and format configuration must align with the converter architecture. Engineers should also verify whether downstream receivers require a particular relationship between the device clock, source audio clock, and output data before finalizing the system timing plan.

🏭

Digital Audio Format Routers

The AK4101AVQ fits digital audio format routers that need four transmitter outputs and support for several interface conventions. AES3, IEC60958, S/PDIF, and EIAJ CP1201 operation up to a 192 kHz sample rate provide a broad foundation for routing high-resolution channels between professional and consumer-oriented equipment. Quad output can reduce board-level component count compared with discrete single-output transmitters. The central engineering task is configuring each output for the format expected by its destination, validating clock and channel alignment, and maintaining compatible signal integrity across internal board traces and external balanced digital audio connections.

What is the AK4101AVQ?
The AK4101AVQ is a four-output digital audio transmitter, or DIT, from Asahi Kasei Microdevices/AKM. According to the AKM AK4101A datasheet, it operates at data rates up to a 192 kHz sample rate and supports 24-bit digital audio. The device also supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 interfaces, making it suitable for multichannel professional-audio routing equipment.
How many digital audio outputs does the AK4101AVQ have?
The AK4101AVQ provides four digital audio outputs. According to the AKM AK4101A datasheet, it is a quad-output digital audio transmitter capable of operation up to 192 kHz. Consolidating four outputs into one 44-LQFP device can simplify PCB routing compared with four separate single-output transmitters, although channel format and receiver compatibility must be confirmed for each output.
What audio formats does the AK4101AVQ support?
The AK4101AVQ supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 digital audio interfaces. These formats are documented in the AKM AK4101A datasheet. AES3 and IEC60958 are commonly associated with professional digital audio connections, while S/PDIF is used for consumer digital audio. The device can therefore support multiple receiver types when configured correctly.
What is the maximum sample rate of the AK4101AVQ?
The AK4101AVQ supports data rates corresponding to sample rates up to 192 kHz. The AKM AK4101A datasheet also identifies 24-bit operation, making the device appropriate for high-resolution multichannel audio routing. Actual usable combinations can depend on interface mode, clock configuration, and the connected receiver, so those settings should be checked before production deployment.
Where can I download the AK4101AVQ datasheet PDF?
The AK4101AVQ datasheet PDF is available at https://www.micro-semiconductor.com/datasheet/bb-AK4101AVQ.pdf. The document contains the AK4101A family description, ordering information, package details, and technical characteristics. For a new design, use the complete datasheet to verify pin assignments, electrical limits, clock requirements, and application circuits before assigning PCB connections.
Where can I find the AK4101AVQ pinout?
The AK4101AVQ pin assignment is defined in the pin-description table of the AKM AK4101A datasheet. The device uses a 44-pin LQFP package with 0.8 mm pitch and a 10 x 10 mm body. Use the complete datasheet rather than relying on a generic package drawing, because power, ground, clock, serial-data, control, and channel-specific signals must be assigned exactly as documented.
Where can I buy the AK4101AVQ and request a quote?
The AK4101AVQ can be requested through the Request a Quote form on this page. The form is the appropriate channel for current unit availability, order quantity, lead time, and package-specific shipment requirements. Commercial status can change, so submit the exact MPN AK4101AVQ and identify whether the required quantity is for prototype, production, or scheduled replenishment.
What is the lead time for the AK4101AVQ?
The current lead time for the AK4101AVQ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, allocation, and requested delivery schedule. Include the target quantity, production schedule, and acceptable package condition in the request so procurement can confirm the most relevant supply information for the design.
Is the AK4101AVQ currently in stock?
Current AK4101AVQ inventory should be confirmed through the Request a Quote form on this page. Because distributor inventory can change rapidly, a listing does not guarantee that a unit quantity is immediately available for shipment. Provide your required quantity and delivery date, and request a written availability and lead-time confirmation before committing the component to a build schedule.
What can replace the AK4101AVQ?
No pin-to-pin drop-in replacement for the AK4101AVQ could be confirmed from the available manufacturer and cross-reference information. A valid replacement must reproduce the 44-LQFP pinout, four digital outputs, AES3, IEC60958, S/PDIF, and EIAJ CP1201 support, 192 kHz operation, and 24-bit audio capability. Any proposed substitute should therefore be checked against the complete AK4101A datasheet before being treated as a drop-in part.
Is the AK4101AVQ the same as the AK4101A?
AK4101AVQ is the orderable AK4101A-family designation for the four-output digital audio transmitter described in the datasheet. The AK4101A name identifies the underlying device family, while the full ordering code identifies a particular package, grade, and ordering option. Use AK4101AVQ when creating the BOM and verify the complete suffix, temperature range, package, and lifecycle status against the ordering guide.
When should I choose the AK4101AVQ over a single-output digital transmitter?
Choose the AK4101AVQ when the design needs four digital audio outputs in one device and every channel can use a compatible interface configuration. Its 192 kHz maximum sample rate and four supported standards can reduce component count and simplify channel routing in multichannel equipment. Select a single-output device instead when the system uses only one channel or requires a format or pin arrangement not provided by the AK4101A.
Is the AK4101AVQ suitable for broadcast consoles and professional mixers?
The AK4101AVQ is suitable for multichannel broadcast-console and professional-mixer signal paths when the system uses compatible digital audio receivers. Its four outputs, operation up to 192 kHz, and support for AES3, IEC60958, S/PDIF, and EIAJ CP1201 address several common digital-audio routing needs. Confirm clocking, channel mapping, connector implementation, and format configuration with the manufacturer application guidance.
AK4101AVQ versus AK4101A - which ordering designation should be used?
Use AK4101AVQ for procurement because it is the complete orderable MPN for the specified 44-LQFP device, while AK4101A is the broader family name used in the device description. The AKM AK4101A datasheet and ordering guide distinguish the family from its package and ordering variants. BOMs should carry AK4101AVQ exactly to avoid ambiguity during component inspection and assembly.
What are the key specifications of AK4101AVQ that engineers should know?
The key AK4101AVQ specifications are four digital audio outputs, operation up to a 192 kHz sample rate, 24-bit audio operation, and support for AES3, IEC60958, S/PDIF, and EIAJ CP1201. The package is a 44-pin LQFP measuring 10 x 10 mm with 0.8 mm pitch, and the specified temperature range is -40 °C to +85 °C. These characteristics come from the AKM AK4101A datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा AK4101AVQ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AK4101AVQ when a system needs four digital audio outputs, operation up to 192 kHz, and support for AES3, IEC60958, S/PDIF, or EIAJ CP1201. It is particularly useful in professional mixers, broadcast consoles, recording interfaces, format routers, and studio monitor equipment where multiple channels must be transmitted from one package. Select a single-output transmitter when only one channel is required or when a different pinout provides a better fit. Do not substitute a generic digital transmitter merely because it handles similar sample rates: the replacement must reproduce the 44-LQFP pin assignment, four outputs, supported formats, clock behavior, and channel configuration. No verified pin-to-pin drop-in alternative was identified for AK4101AVQ, so an unverified cross-reference should be treated as a redesign candidate rather than a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Product Type Four-output digital audio transmitter (DIT)
Number of Outputs 4 outputs
Maximum Sample Rate 192 kHz
Audio Word Length 24 bit
Supported Standards AES3, IEC60958, S/PDIF, EIAJ CP1201
Package 44-LQFP (10 x 10 mm, 0.8 mm pitch)
Brand Asahi Kasei Microdevices/AKM
Operating Temperature Range -40 °C to +85 °C
Mounting Type Surface mount
Safe Operating Area Not applicable to an audio interface IC

मुख्य विशेषताएँ

  • Four digital audio outputs in one package (बनामSingle-output digital audio transmitter)
  • High-resolution multichannel operation (बनामLower-rate digital audio transmitter)
  • Support for four digital-audio interface standards (बनामSingle-interface S/PDIF transmitter)
  • Industrial temperature capability (बनामCommercial-temperature digital transmitter)

डिज़ाइन नोट्स

Use the manufacturer application circuit and pin-description table to assign the AK4101AVQ data, clock, control, power, and ground pins. Keep the digital audio data routes short and continuous, avoid crossings between clock and data where practical, and provide a continuous reference plane beneath the device. The 44-LQFP package has a 0.8 mm pitch, so assembly planning should account for fine-pitch lead alignment, adequate solder-mask spacing, and inspection access.

Establish the required clock, sample-rate, and data relationships before routing the four output channels. Confirm whether each downstream receiver expects AES3, IEC60958, S/PDIF, or EIAJ CP1201 and configure the transmitter output accordingly. Keep clock and data impedances consistent, minimize stubs, and use the manufacturer application guidance when adding termination or connector-driver components. Receiver compatibility must be evaluated across every supported operating mode.

Place the required supply bypass capacitors close to the device's supply and ground pins using the shortest practical return paths. Validate capacitor voltage rating, effective capacitance, dielectric behavior, and tolerance against the complete datasheet requirements. Because the current consumption and detailed decoupling network are not stated in the accessible product listing, the engineer should derive the final power network from the manufacturer application circuit rather than selecting values from generic guidance.

Do not treat the AK4101A family name and the AK4101AVQ ordering code as interchangeable BOM entries. Use AK4101AVQ exactly, verify its 44-LQFP package and -40 °C to +85 °C temperature grade, and confirm channel mapping, clock source, and interface standard for all four outputs. A device with the same general transmitter function is not necessarily pin-compatible, and no verified drop-in substitute was identified for this exact orderable MPN.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit compliance declarations were included for the exact AK4101AVQ ordering code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before using the component in a regulated design.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AK4101AVQ datasheet AK4101AVQ datasheet pdf AK4101AVQ pinout AK4101AVQ 44-LQFP AK4101AVQ digital audio transmitter AK4101AVQ 192kHz 24-bit AK4101AVQ AES3 IEC60958 AK4101AVQ equivalent AK4101AVQ replacement AK4101AVQ cross reference AK4101AVQ buy price AK4101AVQ stock AK4101AVQ professional audio AK4101AVQ digital mixer AK4101AVQ broadcast console

संबंधित कंपोनेंट्स और शब्द

Asahi Kasei Microdevices/AKM AK4101AVQ AK4101A digital audio transmitter DIT audio interface IC digital audio codec semiconductor AES3 IEC60958 S/PDIF EIAJ CP1201 192 kHz sample rate 24-bit audio four-channel output 44-LQFP LQFP package family surface mount SMD professional audio mixer broadcast console digital audio routing studio monitor sample-rate conversion RoHS REACH AEC-Q100
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें