AK4101AVQ - Quad 192kHz 24-Bit Audio DIT | AKM
Référence : AK4101AVQ ✓ ActifAK4101AVQ Présentation
A digital audio transmitter converts an internal digital audio stream into standards-compliant digital audio outputs for transmission or routing. The AK4101A family provides four output channels, allowing one transmitter IC to serve multichannel systems without requiring four separate single-output devices. Support for AES3 and IEC60958 is valuable in professional studio equipment, broadcast consoles, digital mixers, and format converters that exchange 24-bit digital audio over balanced digital connections.
The AK4101AVQ supports data rates corresponding to sample rates up to 192 kHz and 24-bit operation. Its four-output architecture consolidates multiple digital audio paths into one 44-LQFP package, potentially reducing board area and simplifying system-level routing compared with four discrete transmitter packages. The 44-pin LQFP uses a 0.8 mm pitch and is specified for temperatures from -40 °C to +85 °C, supporting industrial as well as commercial equipment.
The transmitter implements digital interface standards rather than analog-to-digital or digital-to-analog conversion. Consequently, its principal design considerations are input and output data timing, supported channel formats, clock and mode configuration, signal integrity across digital audio connections, and correct mapping of audio frames across the four outputs. These considerations are distinct from analog audio mixer and DAC designs, where converter resolution and analog signal integrity dominate device selection.
Typical applications include professional digital mixers, multichannel audio routing equipment, broadcast consoles, digital recording interfaces, sample-rate converters, and studio monitor systems. Four outputs allow several routed channels to share one transmitter package, provided that all attached receivers support the selected format and that the system channel map is configured consistently.
For PCB implementation, follow the manufacturer pin-description and application-circuit tables when assigning data, clock, control, and power pins. Preserve the recommended interface topology, provide adequate decoupling at the supply pins, and route high-speed digital audio signals with continuous reference planes. Confirm the selected output standard, master-clock relationship, channel mapping, and sample rate against the receiver connected to each output before releasing the production design.
This page consolidates the documented AK4101AVQ capabilities, standards support, package information, application context, and sourcing guidance into an engineering-focused product record. It also distinguishes verified device functions from parameters that require confirmation from the complete manufacturer datasheet or an application-specific design review.
Alternatives de remplacement direct pour AK4101AVQ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesAK4101AVQ Spécifications
| Product Type | Four-output digital audio transmitter (DIT) |
| Nombre de sorties | 4 outputs |
| Maximum Sample Rate | 192 kHz |
| Audio Word Length | 24 bit |
| Supported Interface Standard | AES3 |
| Supported Interface Standard | IEC60958 |
| Supported Interface Standard | S/PDIF |
| Supported Interface Standard | EIAJ CP1201 |
| Boîtier | 44-pin LQFP (10 x 10 mm) |
| Package Pitch | 0.8 mm |
| Type de montage | Surface mount |
| Plage de température de fonctionnement | -40 °C to +85 °C |
Guide de configuration des broches du AK4101AVQ 0.8 mm
Configuration des broches du AK4101AVQ (boîtier 0.8 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour AK4101AVQ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AK4101AVQ convient pour 6 applications: Professional Digital Audio Mixers, Broadcast Console Signal Routing, Digital Studio Monitor Systems, Multichannel Recording Interfaces, Sample-Rate Conversion Equipment, Digital Audio Format Routers.
Professional Digital Audio Mixers
The AK4101AVQ fits professional digital mixers that route several channels through one transmitter package. Its four outputs support operation up to a 192 kHz sample rate with 24-bit audio data, while AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface support covers several digital-audio connection requirements. Using one quad-output device can reduce the number of transmitter packages compared with four single-channel implementations. The designer must still map each output to the correct receiver format, synchronize the required clocks, and verify that the selected 192 kHz mode is supported by every connected destination.
Recommandé
Broadcast Console Signal Routing
The AK4101AVQ is appropriate for broadcast consoles that require several independently routed digital-audio outputs in a compact package. Four outputs, 192 kHz maximum sample-rate operation, and 24-bit data support accommodate high-resolution broadcast workflows, while the four documented interface standards provide flexibility for connecting studio and transmission equipment. The four-output arrangement can shorten board routing compared with separate single-output transmitters. Before layout approval, engineers should establish the channel map, required clock relationships, output standard for each receiver, and signal-integrity constraints imposed by the console backplane.
Recommandé
Digital Studio Monitor Systems
The AK4101AVQ can support digital studio-monitor systems in which several audio channels must be transmitted to powered monitors or digital audio receivers. Its four-output architecture allows four routed channels to share one device, while operation up to 192 kHz provides headroom for high-resolution monitoring formats. AES3, IEC60958, S/PDIF, and EIAJ CP1201 support gives the system designer several receiver-facing options. Practical implementation requires matching the transmitter configuration to each monitor input and checking master-clock, sample-rate, and cable-distance requirements before selecting passive and active interface components.
Recommandé
Multichannel Recording Interfaces
The AK4101AVQ fits multichannel recording interfaces that distribute digital audio to external converters, synchronizers, or processing equipment. Four digital outputs can carry routed channels at rates up to 192 kHz and 24-bit resolution, reducing package count compared with four separate transmitters. Support for both professional and consumer-oriented digital-audio standards allows integration with a broader range of receivers, provided each output is configured for the correct format. Designers should use the manufacturer application guidance to confirm clock relationships, data-input format, control behavior, and the channel assignment used by the recording system.
Recommandé
Sample-Rate Conversion Equipment
The AK4101AVQ is applicable in sample-rate conversion and digital audio routing equipment that must distribute multiple converted channels to downstream receivers. Its four outputs and 192 kHz maximum sample-rate capability support high-resolution audio paths, while the available interface standards allow integration with equipment using different digital audio formats. Four independently routed outputs can simplify the physical output stage, but channel mapping and format configuration must align with the converter architecture. Engineers should also verify whether downstream receivers require a particular relationship between the device clock, source audio clock, and output data before finalizing the system timing plan.
Recommandé
Digital Audio Format Routers
The AK4101AVQ fits digital audio format routers that need four transmitter outputs and support for several interface conventions. AES3, IEC60958, S/PDIF, and EIAJ CP1201 operation up to a 192 kHz sample rate provide a broad foundation for routing high-resolution channels between professional and consumer-oriented equipment. Quad output can reduce board-level component count compared with discrete single-output transmitters. The central engineering task is configuring each output for the format expected by its destination, validating clock and channel alignment, and maintaining compatible signal integrity across internal board traces and external balanced digital audio connections.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AK4101AVQ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Product Type | Four-output digital audio transmitter (DIT) |
| Number of Outputs | 4 outputs |
| Maximum Sample Rate | 192 kHz |
| Audio Word Length | 24 bit |
| Supported Standards | AES3, IEC60958, S/PDIF, EIAJ CP1201 |
| Package | 44-LQFP (10 x 10 mm, 0.8 mm pitch) |
| Brand | Asahi Kasei Microdevices/AKM |
| Operating Temperature Range | -40 °C to +85 °C |
| Mounting Type | Surface mount |
| Safe Operating Area | Not applicable to an audio interface IC |
Principaux différenciateurs
- Four digital audio outputs in one package (vs Single-output digital audio transmitter)
- High-resolution multichannel operation (vs Lower-rate digital audio transmitter)
- Support for four digital-audio interface standards (vs Single-interface S/PDIF transmitter)
- Industrial temperature capability (vs Commercial-temperature digital transmitter)
Notes de conception
Use the manufacturer application circuit and pin-description table to assign the AK4101AVQ data, clock, control, power, and ground pins. Keep the digital audio data routes short and continuous, avoid crossings between clock and data where practical, and provide a continuous reference plane beneath the device. The 44-LQFP package has a 0.8 mm pitch, so assembly planning should account for fine-pitch lead alignment, adequate solder-mask spacing, and inspection access.
Establish the required clock, sample-rate, and data relationships before routing the four output channels. Confirm whether each downstream receiver expects AES3, IEC60958, S/PDIF, or EIAJ CP1201 and configure the transmitter output accordingly. Keep clock and data impedances consistent, minimize stubs, and use the manufacturer application guidance when adding termination or connector-driver components. Receiver compatibility must be evaluated across every supported operating mode.
Place the required supply bypass capacitors close to the device's supply and ground pins using the shortest practical return paths. Validate capacitor voltage rating, effective capacitance, dielectric behavior, and tolerance against the complete datasheet requirements. Because the current consumption and detailed decoupling network are not stated in the accessible product listing, the engineer should derive the final power network from the manufacturer application circuit rather than selecting values from generic guidance.
Do not treat the AK4101A family name and the AK4101AVQ ordering code as interchangeable BOM entries. Use AK4101AVQ exactly, verify its 44-LQFP package and -40 °C to +85 °C temperature grade, and confirm channel mapping, clock source, and interface standard for all four outputs. A device with the same general transmitter function is not necessarily pin-compatible, and no verified drop-in substitute was identified for this exact orderable MPN.
Informations de conformité
No explicit compliance declarations were included for the exact AK4101AVQ ordering code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before using the component in a regulated design.