Microchip Technology

ATSAMD20E14B-MU - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD20E14B-MU ✓ सक्रिय
1.6 V to 3.6 V Vdss 32-VFQFN, 5 x 5 mm, exposed pad Package 48 MHz Speed 16 KB (16K x 8 bits) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATSAMD20E14B-MU अवलोकन

The Microchip Technology ATSAMD20E14B-MU is a low-power, 32-bit ARM Cortex-M0+ flash microcontroller operating at up to 48 MHz, with 16 KB of flash memory and 2 KB of SRAM in a 32-VFQFN 5 x 5 mm package with an exposed pad. It is designed for compact embedded systems that require efficient control, analog measurement, and low-power peripheral integration.

A microcontroller is a programmable control IC that combines a processor core, memory, and peripherals on one semiconductor device. The Cortex-M0+ core provides a compact instruction set suited to real-time control, while the ATSAMD20E14 family integrates flash, SRAM, communication interfaces, analog conversion functions, and timing resources into a low-power embedded platform.

Key device characteristics include a maximum operating frequency of 48 MHz, 16 KB of flash, and 2 KB of SRAM. The 1.6 V to 3.6 V operating range supports low-voltage 3.3 V systems, while the industrial-temperature B grade targets applications requiring operation across an extended commercial temperature range. The 32-VFQFN package also provides an exposed thermal pad that improves heat dissipation when the device operates at higher clock frequencies or with active peripherals.

The ATSAMD20E14 belongs to Microchip's SAM D20 series and is based on the ARM Cortex-M0+ architecture. Its compact memory configuration is suitable for protocol translation, data acquisition, basic control loops, and auxiliary embedded tasks where a larger application controller is unnecessary. The SAM D20 family also supports peripherals including a 12-bit ADC, a 10-bit DAC, PTC temperature sensing, and an RTC, according to the family datasheet description.

Typical uses include home automation, consumer products, metering equipment, and industrial controls. A metering design can use the ADC for analog sensor inputs, the RTC for timekeeping, and serial interfaces for communicating with a display or upstream controller. In a smart-home node, low-power operation and compact packaging support cost- and space-constrained control boards.

PCB design should follow the manufacturer land pattern and pin-description tables for the 32-VFQFN package. Place decoupling capacitors close to the supply pins, connect the exposed pad to the appropriate ground plane, and preserve clearances around the package perimeter. Validate signal routing, clock stability, analog grounding, and thermal performance across the intended voltage and temperature ranges.

This product summary combines the device architecture, memory configuration, package details, sourcing context, and practical implementation considerations needed to plan an ATSAMD20E14B-MU-based design. It also highlights the distinctions to review before approving a replacement or transferring the circuit to another SAM D20 member.

के लिए ड्रॉप-इन विकल्प ATSAMD20E14B-MU — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATSAMD20E14B-MU (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Package.

Microchip Technology
Flash Memory: 16 KB
Package: 32-pin VQFN (5x5 mm) with Exposed Pad
इसके साथ तुलना करें ATSAMD20E14B-MU →

ATSAMD20E14B-MUT

✅ ड्रॉप-इन
Microchip Technology
📦 32-VFQFN (5x5) Exposed Pad
ARM Cortex-M0+ (32-bit) · 48 MHz · 16 KB · 2 KB · 1.62 V to 3.6 V · 26 · 6 (UART/SPI/I2C configurable) · 12-bit, up to 16 channels, 350 ksps

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATSAMD20E14B-MNT

✅ ड्रॉप-इन
📦 32-VFQFN (5x5) Exposed Pad
Same 48 MHz Cortex-M0+ core and 16 KB flash in a 32-terminal package; verify package drawing, pinout, and temperature grade against the existing PCB

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMD20E14B-MU Maximum Ratings और Electrical Characteristics

Processor Core ARM Cortex-M0+
Architecture 32-bit
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8 bits)
SRAM 2 KB
ऑपरेटिंग सप्लाई वोल्टेज 1.6 V to 3.6 V
Nominal Supply Voltage 3.3 V
Device Type Low-power flash microcontroller
Product Series SAM D20E
पैकेज 32-VFQFN, 5 x 5 mm, exposed pad
माउंटिंग प्रकार Surface mount
Temperature Grade Industrial temperature grade
ADC Resolution 12 bits
DAC Resolution 10 bits
Temperature Sensing 256-channel PTC support
Real-Time Clock Supported
Green Product Yes

ATSAMD20E14B-MU 32-vfqfn, 5 x 5 mm, exposed pad पिन कॉन्फ़िगरेशन गाइड

ATSAMD20E14B-MU (32-vfqfn, 5 x 5 mm, exposed pad पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATSAMD20E14B-MU के लिए 32-vfqfn, 5 x 5 mm, exposed pad पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATSAMD20E14B-MU.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATSAMD20E14B-MU के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Metering Controller, Smart Home Sensor Node, Consumer Appliance Control, Home Automation Gateway Module, Battery-Powered Data Logger, Portable Medical Sensor Interface.

🏭

Industrial Metering Controller

The ATSAMD20E14B-MU fits compact metering controllers where a 48 MHz Cortex-M0+ core can perform control and measurement functions without a larger memory footprint. Its 12-bit ADC supports analog sensor conditioning, while the integrated 10-bit DAC can provide basic analog control or test signals. The 16 KB flash and 2 KB SRAM place explicit limits on application code and working data, so the firmware should use compact drivers and an RTOS only when its memory overhead is justified. The 1.6 V to 3.6 V operating range supports 3.3 V meter electronics, and the 32-VFQFN footprint simplifies dense, low-cost meter boards.

🧩

Smart Home Sensor Node

The ATSAMD20E14B-MU can act as the local controller for a connected sensor node that gathers measurements and manages low-power peripherals. Its 48 MHz Cortex-M0+ core provides responsive handling of sensor data and communication interrupts, while 16 KB of flash suits a focused firmware image rather than a feature-rich gateway. The integrated ADC and PTC temperature-sensing support reduce external signal-conditioning requirements. Because the 5 x 5 mm VFQFN package leaves little room for excess decoupling or routing errors, place bypass capacitors directly beside the supply pins and route analog inputs away from switching-node currents.

🔧

Consumer Appliance Control

ATSAMD20E14B-MU is appropriate for a small consumer appliance controller where deterministic low-cost control matters more than large application storage. The 32-bit Cortex-M0+ processor executes motor, button, and interface logic at up to 48 MHz, and the 2 KB SRAM is sufficient for compact state machines and short communication buffers. A 3.3 V system architecture aligns with the device's 1.6 V to 3.6 V operating range. Designers should reserve flash space for calibration and firmware updates, and should use the exposed pad as a deliberate thermal path rather than leaving it isolated during board layout.

🌐

Home Automation Gateway Module

The ATSAMD20E14B-MU can serve as a peripheral or leaf controller within a home-automation system, coordinating inputs, local outputs, and a low-speed communications interface. Its 48 MHz processing rate supports event handling and protocol routines, while the compact 32-VFQFN package allows placement alongside a radio or communications component. The limited 16 KB flash and 2 KB SRAM favor a focused gateway role rather than local data aggregation or graphics. Power-budget design should include the MCU, analog peripherals, and any attached radio because the MCU's own operating range does not determine the accuracy of peripheral measurements.

⚡

Battery-Powered Data Logger

ATSAMD20E14B-MU can support a compact battery-powered logger when its low-power operating modes and on-chip memory are sufficient for the application. The 48 MHz Cortex-M0+ core can timestamp and process samples between sleep intervals, while the ADC enables direct connection to suitable analog sensors. With only 16 KB of flash and 2 KB of SRAM, buffered data should normally be transferred rather than accumulated indefinitely. Validate sleep-mode current, wake-up behavior, and analog accuracy at the minimum system voltage, and isolate analog inputs when the device is inactive to avoid collecting unintended sensor bias.

💊

Portable Medical Sensor Interface

The ATSAMD20E14B-MU can be evaluated for a portable medical-sensor interface where compactness, low supply voltage, and deterministic embedded control are important. Its 12-bit ADC provides a starting point for low-bandwidth physiological or diagnostic sensor conditioning, while the 10-bit DAC can generate low-level excitation or test signals. The 16 KB flash and 2 KB SRAM require careful partitioning for safety checks, acquisition routines, and communications. For medical use, complete the appropriate risk assessment, validate input leakage and accuracy, and confirm the applicable regulatory requirements independently of the component's RoHS status.

अनुशंसित उत्पादों का सारांश

ATSAMD20E14 Base SAM D20 family device उपयोग में: Industrial Metering Controller, Smart Home Sensor Node, Consumer Appliance Control, Home Automation Gateway Module, Battery-Powered Data Logger, Portable Medical Sensor Interface ATSAMD20E14B-MUT Microchip Technology उपयोग में: Industrial Metering Controller, Consumer Appliance Control, Battery-Powered Data Logger ATSAMD20E14B-MNT Pin-compatible alternate ordering code उपयोग में: Smart Home Sensor Node, Home Automation Gateway Module, Portable Medical Sensor Interface
What are the key specifications of ATSAMD20E14B-MU that engineers should know?
The ATSAMD20E14B-MU is a 32-bit ARM Cortex-M0+ microcontroller rated for operation up to 48 MHz, with 16 KB of flash memory and 2 KB of SRAM. It operates from 1.6 V to 3.6 V and is packaged in a 32-VFQFN 5 x 5 mm format with an exposed pad. Microchip identifies the device as an industrial-temperature, green-product member of the SAM D20E family for embedded control and metering designs.
Where can I download the ATSAMD20E14B-MU datasheet PDF?
The ATSAMD20E14 family documentation is available through the official Microchip product page for ATSAMD20E14. Use the manufacturer datasheet and pin-description tables to confirm the 32-VFQFN footprint, exposed-pad connection, electrical limits, and peripheral multiplexing for the ATSAMD20E14B-MU ordering code. The direct family page is https://www.microchip.com/en-us/product/ATSAMD20E14 and is the authoritative starting point for current documentation.
Where can I find the ATSAMD20E14B-MU pinout?
The ATSAMD20E14B-MU pinout is defined in the pin-description section of the Microchip ATSAMD20E family datasheet. The device uses a 32-VFQFN 5 x 5 mm package with an exposed pad, so the PCB footprint, exposed-pad geometry, and pin multiplexing must all match the package drawing. Use the manufacturer's pin-description table when assigning alternate peripheral functions or planning the exposed-pad connection.
What is the operating voltage range of ATSAMD20E14B-MU?
The ATSAMD20E14B-MU operates from 1.6 V to 3.6 V, supporting low-voltage embedded systems that commonly use a 3.3 V rail. The product listing identifies 3.3 V as the nominal operating condition, while another device description gives the broader 1.6 V to 3.6 V range. Confirm power-up, timing, and peripheral-specific limits in the family datasheet before finalizing the system power architecture.
How much flash and SRAM does ATSAMD20E14B-MU have?
The ATSAMD20E14B-MU contains 16 KB of flash memory organized as 16K x 8 bits and 2 KB of SRAM. This configuration suits compact control tasks, data acquisition, protocol handling, and products where the application code and working data fit within a small memory footprint. Firmware planning should include room for boot code, interrupt handlers, application logic, stack usage, and any bootloader update requirements.
Is ATSAMD20E14B-MU suitable for industrial control and metering applications?
Yes, the ATSAMD20E14B-MU is suitable for compact industrial-control and metering designs that fit within 16 KB of flash and 2 KB of SRAM. Microchip identifies the SAM D20 family for home automation, consumer, metering, and industrial applications. Its 48 MHz Cortex-M0+ core, 1.6 V to 3.6 V supply range, and industrial-temperature grade support responsive embedded processing in space-constrained systems.
Can ATSAMD20E14B-MU measure analog signals and generate analog output?
Yes, the SAM D20 family includes a 12-bit ADC and a 10-bit DAC, making the ATSAMD20E14B-MU appropriate for sensor acquisition and basic analog-output requirements. The family documentation also identifies 256-channel PTC temperature-sensing support. Exact channel count, input range, acquisition timing, and DAC behavior for the selected device must be confirmed in the ATSAMD20E datasheet before circuit design.
What can replace ATSAMD20E14B-MU?
The closest documented drop-in alternative is the ATSAMD20E14B-MUT, which retains the same Microchip SAM D20E device characteristics, 48 MHz maximum frequency, 16 KB flash, and 32-VFQFN package but uses a different orderable shipping format. Any substitution must be checked against the exact package drawing, pin multiplexing, exposed pad, temperature grade, and stored firmware compatibility before it is approved.
Is ATSAMD20E14B-MU the same as ATSAMD20E14B-MUT?
The ATSAMD20E14B-MUT is electrically and pin compatible with the ATSAMD20E14B-MU, but it is a different orderable code associated with a different shipping format. Both are listed as 48 MHz Cortex-M0+ SAM D20E devices with 16 KB flash in a 32-VFQFN 5 x 5 mm package. The distinction should be handled as a procurement configuration choice rather than a functional redesign.
ATSAMD20E14B-MU vs ATSAMD20E14B-MNT - which is better for an existing design?
Choose ATSAMD20E14B-MU when the exact orderable code and its listed package configuration are required by the BOM. Choose ATSAMD20E14B-MNT only after verifying that its 32-terminal package drawing, pin functions, exposed-pad implementation, and temperature limits match the existing PCB. Both are Microchip SAM D20E variants, but package-code compatibility must be confirmed rather than inferred from the shared family name.
When should I choose ATSAMD20E14B-MU over another Cortex-M0+ microcontroller?
Choose ATSAMD20E14B-MU when the design specifically benefits from the SAM D20E feature set, including 48 MHz operation, 16 KB flash, 2 KB SRAM, integrated ADC and DAC resources, PTC sensing support, and a 32-VFQFN 5 x 5 mm footprint. Compare these resources against the application firmware size, peripheral requirements, package dimensions, toolchain, and long-term supply needs before finalizing the MCU choice.
What is the best Microchip equivalent for ATSAMD20E14B-MU?
The best documented Microchip alternative is ATSAMD20E14B-MUT because it retains the 48 MHz Cortex-M0+ core, 16 KB flash, and 32-VFQFN package configuration. It is primarily an orderable-format change rather than a functional upgrade. If pinout, temperature grade, or exposed-pad requirements differ, use ATSAMD20E14B-MNT only after completing a package-level and electrical comparison.
How should I design the PCB for ATSAMD20E14B-MU?
Use the Microchip 32-VFQFN land pattern, place supply decoupling capacitors close to the relevant pins, and connect the exposed pad to the ground plane using the manufacturer layout guidance. Keep sensitive analog inputs away from high-current switching paths and maintain the required clearance around the 5 x 5 mm package. Validate the final stack-up, thermal behavior, and signal integrity with the applicable reference design.
What thermal considerations apply to ATSAMD20E14B-MU?
The 32-VFQFN package includes an exposed pad, so its thermal performance depends heavily on the PCB copper area, thermal-via pattern, internal plane connection, and ambient conditions. Estimate junction temperature from package dissipation and board thermal resistance, then verify operation at the highest expected clock frequency, peripheral load, and ambient temperature. Do not treat the exposed pad as an optional copper feature.
Where to buy ATSAMD20E14B-MU online and what is its lead time?
Use the Request a Quote form on this page to ask for ATSAMD20E14B-MU availability, lot traceability, current lead time, and minimum order quantity. The manufacturer product page confirms the device family, while distributor records identify the exact ordering code in a 32-VFQFN 5 x 5 mm package. Purchase decisions should use a current quote because stock and lead time can change rapidly.
Is ATSAMD20E14B-MU currently in stock and what does it cost?
ATSAMD20E14B-MU availability and pricing should be confirmed through the Request a Quote form on this page. The manufacturer lists the ATSAMD20E14 family for embedded applications, and distributor records identify the exact 48 MHz, 16 KB-flash ordering code. Use the quote form for the current unit price, quantity breaks, stock position, and lead time rather than relying on an outdated catalog figure.

के लिए इंजीनियरिंग संदर्भ डेटा ATSAMD20E14B-MU — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ATSAMD20E14B-MU when the design specifically requires the Microchip SAM D20E feature set, 48 MHz Cortex-M0+ performance, 16 KB flash, 2 KB SRAM, and a 32-VFQFN 5 x 5 mm footprint. Select ATSAMD20E14B-MUT when its orderable shipping format is preferable and the electrical configuration is otherwise identical. ATSAMD20E14B-MNT is a possible same-package alternative, but its package drawing, temperature grade, exposed-pad implementation, and pin functions must be matched to the existing PCB before approval. No cross-brand MCU is recommended solely from package size or clock speed because peripheral mappings, memory maps, interrupts, and toolchain requirements can prevent a true drop-in replacement. Validate firmware, startup, clock, debug, and peripheral behavior as one complete design review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATSAMD20E14B-MUT ATSAMD20E14B-MNT
Brand Microchip Technology Microchip Technology Microchip Technology
Package 32-VFQFN (5x5) Exposed Pad 32-VFQFN (5x5) Exposed Pad 32-terminal package; drawing requires verification
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz
Flash Memory 16 KB 16 KB 16 KB
SRAM 2 KB 2 KB 2 KB
Operating Supply Voltage 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
ADC Resolution 12 bits 12 bits 12 bits
DAC Resolution 10 bits 10 bits 10 bits

मुख्य विशेषताएँ

  • Directly preserves the documented SAM D20E configuration (बनामATSAMD20E14B-MUT)
  • Compact 16 KB flash configuration supports focused embedded firmware (बनामATSAMD20E14B-MNT)
  • Integrated analog resources reduce external support components (बनामATSAMD20E14B-MUT)

डिज़ाइन नोट्स

Use the manufacturer land pattern for the 32-VFQFN 5 x 5 mm package and place all required bypass capacitors adjacent to their associated supply pins. Keep analog inputs and references on the quiet side of the board, away from switching power paths and high-current return currents. Because the exposed pad is part of the thermal and electrical footprint, connect it to the recommended ground structure and thermal vias rather than treating it as spare area.

Design the 3.3 V supply path so its voltage remains between 1.6 V and 3.6 V under startup, load transients, and minimum operating conditions. Check the maximum total current from the MCU and attached peripherals against the regulator's capacity and dropout behavior. Account for inrush from external loads that may be switched around the MCU, and use the family's low-power modes deliberately when designing battery-powered applications.

Estimate the ATSAMD20E14B-MU's temperature rise at the highest expected clock rate and peripheral activity, then add that rise to the maximum ambient temperature. The 32-VFQFN exposed pad lowers junction temperature only when it is connected to an effective copper and via network. Validate thermal performance on the final board because PCB copper area, layer count, airflow, adjacent heat sources, and package orientation can materially change the result.

Do not assume that every ATSAMD20E14 orderable code has the same footprint or temperature rating. Verify the package drawing, exposed-pad connection, pin multiplexing, flash configuration, and maximum clock behavior against the exact MPN before releasing PCB artwork or production firmware. With only 16 KB of flash and 2 KB of SRAM, also check bootloader, stack, interrupt-vector, and application-code requirements before committing to the device.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device is identified as a green product. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or distributor documentation.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ATSAMD20E14B-MU datasheet ATSAMD20E14B-MU pinout ATSAMD20E14B-MU datasheet pdf ATSAMD20E14B-MU equivalent ATSAMD20E14B-MU replacement ATSAMD20E14B-MU cross reference ATSAMD20E14B-MU vs ATSAMD20E14B-MUT ATSAMD20E14B-MU footprint ATSAMD20E14B-MU application circuit ATSAMD20E14B-MU price ATSAMD20E14B-MU stock Microchip ATSAMD20E14B-MU

संबंधित कंपोनेंट्स और शब्द

Microchip Technology ATSAMD20E14B-MU ATSAMD20E14 ATSAMD20E14B-MUT ATSAMD20E14B-MNT ARM Cortex-M0+ SAM D20E microcontroller 32-bit microcontroller flash microcontroller embedded controller semiconductor 32-VFQFN QFN family surface mount SMD 16 KB flash 2 KB SRAM 48 MHz 12-bit ADC 10-bit DAC PTC temperature sensing real-time clock industrial metering home automation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें