Microchip Technology

ATSAMD20E18A-AN - 48MHz 256KB Cortex-M0+ MCU | Microchip

MPN: ATSAMD20E18A-AN ✓ सक्रिय
1.62 V to 3.63 V Vdss 32-pin TQFP, 7 x 7 mm Package 48 MHz Speed 256 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATSAMD20E18A-AN अवलोकन

The Microchip ATSAMD20E18A-AN is a low-power 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 256 KB of embedded flash and 32 KB of SRAM in a 32-pin TQFP package measuring 7 x 7 mm. Its operating supply range is 1.62 V to 3.63 V, making it suitable for compact embedded control, metering, consumer, home-automation, and industrial systems. The microcontroller combines deterministic real-time execution with flexible serial peripherals and low-power operating modes for energy-conscious designs.

An ARM Cortex-M0+ microcontroller is a 32-bit embedded processor designed around the Arm Thumb instruction set. It belongs to the microcontroller hierarchy, combining a CPU core, embedded nonvolatile memory, SRAM, general-purpose I/O, timers, and communication interfaces on one integrated device. Compared with a general-purpose application processor, the Cortex-M0+ architecture emphasizes deterministic control, compact software, and efficient peripheral-driven operation. The ATSAMD20E18 family targets applications where predictable response and low system complexity are more important than workstation-class computing.

The ATSAMD20E18A-AN provides 256 KB of flash for firmware, boot code, configuration data, and application routines. Its 32 KB of SRAM supports working data, stack operations, buffers, and real-time control tasks. Operation to 48 MHz allows the core to execute control loops and protocol handling efficiently, while the 1.62 V to 3.63 V supply range accommodates common low-voltage embedded systems. The green 32-TQFP package supports compact PCB layouts and is specified for operation from -40°C to +105°C.

The device architecture is organized around a 32-bit Cortex-M0+ processor, embedded flash, SRAM, GPIO, and dedicated serial peripherals. At 1.62 V through 3.63 V, the core can operate up to 48 MHz; the family datasheet also identifies reduced 32 MHz operation for higher-temperature conditions. This combination gives designers useful clocking flexibility when power, temperature, or peripheral performance limits must be balanced. The integration also reduces external component count by placing the core, memory, and communication functions in one device.

Typical uses include smart-metering equipment, connected home devices, industrial controllers, sensor nodes, consumer appliances, and compact automation products. In a metering design, the MCU can combine timer-based measurement, serial communication, and local data processing. In a sensor node, its low-voltage operation and multiple low-power states can simplify duty-cycled operation. For communication equipment, it can manage a local serial link and execute application logic without requiring an external processor.

Designers should pay close attention to the 1.62 V minimum operating voltage, especially when using 1.8 V sensors or radio modules. Confirm pin-level multiplexing, peripheral instance assignments, clock settings, and package dimensions against the Microchip ATSAMD20E18 datasheet before schematic capture. Decoupling and signal-return paths should follow the recommended layout practices to reduce switching noise and preserve reliable peripheral timing.

This product overview combines the confirmed ATSAMD20E18A-AN operating specifications with practical guidance for low-voltage embedded designs. It also organizes same-footprint Microchip alternatives, application considerations, and engineering checks to help accelerate component selection and PCB planning without obscuring the distinctions between package, temperature, and feature variants.

के लिए ड्रॉप-इन विकल्प ATSAMD20E18A-AN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATSAMD20E18A-AN (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, ADC, SRAM, Flash Memory, MSL Level.

Microchip Technology
Package: 32-pin TQFP (7x7 mm)
ADC: 12-bit SAR + 16-bit Sigma-Delta
Flash Memory: 256 KB (in-system programmable)
इसके साथ तुलना करें ATSAMD20E18A-AN →
Microchip Technology
Package: 32-TQFP (7x7 mm)
ADC: 12-bit, up to 14 channels
SRAM: 2 KB
इसके साथ तुलना करें ATSAMD20E18A-AN →
Microchip Technology
Package: 32-pin TQFP (7x7 mm)
ADC: 12-bit, up to 10 channels, 350 ksps
SRAM: 16 KB
इसके साथ तुलना करें ATSAMD20E18A-AN →
Microchip Technology
Package: 32-TQFP 7x7 mm
ADC: 12-bit, 350 ksps, up to 14 channels
MSL Level: 3 (168 hours)
इसके साथ तुलना करें ATSAMD20E18A-AN →
Microchip Technology
Package: 32-pin TQFP, 7 x 7 mm
SRAM: 32 KB
Flash Memory: 256 KB
इसके साथ तुलना करें ATSAMD20E18A-AN →

ATSAMD20E18A-AU

✅ ड्रॉप-इन
Microchip Technology
📦 32-TQFP (7x7)
ARM Cortex-M0+ · 32-bit · 48 MHz · 256 KB (256K x 8) · 32 KB · 1.62 V to 3.63 V · -40 C to +85 C (industrial) · 32-TQFP 7x7 mm

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATSAMD21E18A-AU

✅ ड्रॉप-इन
Microchip Technology
📦 32-TQFP (7x7)
32-bit ARM Cortex-M0+ Flash microcontroller · Arm Cortex-M0+ · 48 MHz · 256 KB · 32 KB · 1.6 V to 3.6 V · 32-pin TQFP, 7 x 7 mm · Approximately 26

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATSAMC20E18A-AUT

✅ ड्रॉप-इन
Microchip Technology
📦 32-TQFP (7x7)
ARM Cortex-M0+ (32-bit) · 48 MHz · 2.46 CoreMark/MHz · 256 KB (in-system programmable) · 8 KB (independent bank) · 32 KB · 2.7 V to 5.5 V · 5 V tolerant

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATSAMD20E18A-AN Maximum Ratings और Electrical Characteristics

Product Type 32-bit ARM Cortex-M0+ flash microcontroller
CPU Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 256 KB
Flash Organization 256K x 8 bits
SRAM 32 KB
Operating Supply Voltage Range 1.62 V to 3.63 V
Architecture 32-bit RISC
पैकेज 32-pin TQFP, 7 x 7 mm
माउंटिंग प्रकार Surface mount
Industrial Temperature Range -40°C to +85°C
Extended Temperature Range -40°C to +105°C
Maximum CPU Frequency at -40°C to +85°C 48 MHz
Maximum CPU Frequency at -40°C to +105°C 32 MHz
Green Manufacturing Classification Green

ATSAMD20E18A-AN 32-pin tqfp, 7 x 7 mm पिन कॉन्फ़िगरेशन गाइड

ATSAMD20E18A-AN (32-pin tqfp, 7 x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATSAMD20E18A-AN के लिए 32-pin tqfp, 7 x 7 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATSAMD20E18A-AN.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATSAMD20E18A-AN के लिए उपयुक्त है 6 अनुप्रयोगs: Smart Metering, Home Automation, Industrial Sensor Node, Consumer Appliance Control, Connected Equipment Gateway, Data Acquisition and Control.

🔧

Smart Metering

The ATSAMD20E18A-AN suits smart-metering controllers that must combine timing-sensitive measurement, local data processing, and serial communications. Its Arm Cortex-M0+ core operates up to 48 MHz, while 256 KB of flash holds measurement routines, communication stacks, and calibration data, and 32 KB of SRAM supports working buffers. The 1.62 V to 3.63 V operating range accommodates low-energy sensor and communication circuitry. At temperatures above the 48 MHz industrial limit, the MCU can be configured for up to 32 MHz through -40°C to +105°C, allowing one controller design to cover both metering and extended-temperature environments.

🧩

Home Automation

The ATSAMD20E18A-AN can serve as the local controller in a compact home-automation node that coordinates sensors, actuators, and communications. Its 48 MHz Cortex-M0+ processor provides adequate throughput for protocol handling and event-driven control, while 256 KB of flash and 32 KB of SRAM support connected-device firmware without an external memory device. The wide 1.62 V minimum supply supports common low-voltage power trees. Product developers can use the extended-temperature capability of 32 MHz operation from -40°C to +105°C for indoor equipment exposed to elevated enclosure temperatures.

🏭

Industrial Sensor Node

The ATSAMD20E18A-AN fits low-power industrial sensor nodes that periodically acquire measurements, filter data, and report through a local serial link. The 1.62 V to 3.63 V range gives designers flexibility when powering the MCU from low-energy sources or regulated sensor rails. With 256 KB of flash and 32 KB of SRAM, the device can maintain firmware, calibration tables, sample buffers, and communication state on-chip. It can run at 48 MHz through -40°C to +85°C, or reduce the maximum to 32 MHz for operation through -40°C to +105°C.

🔧

Consumer Appliance Control

The ATSAMD20E18A-AN can manage motor, display, and communication tasks in a compact consumer appliance controller. Its 48 MHz Cortex-M0+ core supports responsive state-machine control, and the on-chip 256 KB flash and 32 KB SRAM reduce system complexity by holding application code, user settings, and working buffers locally. The 1.62 V minimum operating voltage is useful for low-voltage mixed-signal systems, while the 32-pin TQFP package supports compact, high-density layouts. Firmware designers should use the device sleep modes and peripheral clock controls to reduce standby consumption.

🌐

Connected Equipment Gateway

The ATSAMD20E18A-AN is appropriate for a local equipment gateway that translates between sensors, actuators, and a host communications interface. Its 48 MHz processing capability allows concurrent handling of timers, packet processing, and control logic, while 256 KB of flash accommodates a bootloader and application firmware. The 32 KB SRAM region can hold communication buffers and state machines. Its 1.62 V to 3.63 V supply range supports integration with low-voltage radios and sensors, and its 7 x 7 mm TQFP package helps reduce board area in densely packaged industrial equipment.

📺

Data Acquisition and Control

The ATSAMD20E18A-AN supports compact data-acquisition and deterministic control systems requiring local processing close to sensors or actuators. The 48 MHz Arm Cortex-M0+ core can service timers and communications while 32 KB of SRAM provides space for acquisition buffers. Its 256 KB flash stores configuration, calibration, and application code, while the 1.62 V to 3.63 V range enables use with low-voltage analog front ends. For extended-temperature installations, the device supports up to 32 MHz from -40°C to +105°C, trading peak processing rate for broader environmental tolerance.

What are the key specifications of ATSAMD20E18A-AN that engineers should know?
The ATSAMD20E18A-AN is a 32-bit Arm Cortex-M0+ flash MCU with a 48 MHz maximum CPU frequency, 256 KB of flash, 32 KB of SRAM, and a 1.62 V to 3.63 V operating supply range. According to the Microchip ATSAMD20E18 datasheet, it is available in a compact 32-pin TQFP package measuring 7 x 7 mm. The family supports operation from -40°C to +85°C at 48 MHz and from -40°C to +105°C at up to 32 MHz, providing useful guidance for industrial product designs.
What is the operating voltage of ATSAMD20E18A-AN?
The ATSAMD20E18A-AN operates from 1.62 V to 3.63 V. According to the Microchip ATSAMD20E18 datasheet, the 1.62 V minimum provides compatibility with low-voltage embedded systems, while the 3.63 V upper limit covers common 3.3 V rails. Designers should verify that every attached sensor, transceiver, and pull network remains within its own valid voltage limits. A regulated 3.3 V source or a compatible 1.8 V system supply can therefore be used when the associated peripheral requirements are satisfied.
How much flash and SRAM does ATSAMD20E18A-AN have?
The ATSAMD20E18A-AN contains 256 KB of flash and 32 KB of SRAM. According to the Microchip ATSAMD20E18 family information, the flash is organized as 256K x 8 bits and can hold firmware, configuration values, calibration constants, and application data. The 32 KB SRAM region supports stack space, protocol buffers, control variables, and working data. Engineers should size the linker configuration and real-time memory allocation against those two independently defined memory pools before finalizing the application architecture.
Where can I download the ATSAMD20E18A-AN datasheet PDF?
The ATSAMD20E18A-AN datasheet can be downloaded from the Microchip ATSAMD20E18 product page or from the ATSAMD20E18 datasheet PDF link associated with this listing. The document is titled ATSAMD20E18 and covers the SAM D20E family's operating conditions, electrical characteristics, memory, peripherals, and package information. Use the pin-description and memory-map sections during schematic review, and use the electrical-characteristics tables when selecting the system supply and decoupling components.
Where can I find the ATSAMD20E18A-AN pinout?
The ATSAMD20E18A-AN pinout is documented in the pin-description and package drawings of the Microchip ATSAMD20E18 datasheet. This device uses a 32-pin TQFP package measuring 7 x 7 mm. Assign signals from the manufacturer pin table rather than relying on a generic 32-pin footprint because peripheral multiplexing and power pins must match the specific ATSAMD20E18A-AN variant. Also verify the exposed programming or test functions shown for this ordering code before finalizing the board layout.
Is ATSAMD20E18A-AN suitable for industrial control applications?
The ATSAMD20E18A-AN is suitable for industrial control applications requiring an Arm Cortex-M0+ MCU, 256 KB of flash, 32 KB of SRAM, and operation from 1.62 V to 3.63 V. According to the Microchip ATSAMD20E18 datasheet, the family supports -40°C to +85°C operation at up to 48 MHz and -40°C to +105°C operation at up to 32 MHz. This makes it appropriate for controllers, meters, and industrial sensor nodes when the selected extended-temperature configuration and all peripheral requirements are confirmed.
What can replace ATSAMD20E18A-AN on the same 32-pin TQFP footprint?
ATSAMD20E18A-AU is the closest documented same-family option because it uses the 32-pin TQFP configuration and provides the same ATSAMD20E18A core, memory, and voltage framework. ATSAMD21E18A-AU is also a 32-pin TQFP option for designs that can validate the peripheral and software differences. Use the pin tables, peripheral assignments, and device configuration before replacing ATSAMD20E18A-AN. Contact XAIPART through the Request a Quote form for a fit review of the exact replacement.
Is ATSAMD20E18A-AN the same as ATSAMD20E18A-AU?
The ATSAMD20E18A-AN and ATSAMD20E18A-AU share the ATSAMD20E18A device family and 32-pin TQFP format, but the final ordering suffix can identify a different delivery package. The suffix also affects orderable configuration and should be checked against the manufacturer product page. For PCB compatibility, compare the complete pin tables, peripheral multiplexing, temperature grade, and programming requirements. Use the Request a Quote form to confirm the exact suffix and intended assembly configuration.
ATSAMD20E18A-AN vs ATSAMD21E18A-AU - which is better for a new design?
The ATSAMD20E18A-AN is the direct choice when the design is being developed specifically around the ATSAMD20E18 family, while ATSAMD21E18A-AU belongs to the related SAM D21 family. Both can use a 32-pin TQFP format and offer Arm Cortex-M0+ processing, but their peripheral sets, feature sets, and software support must be compared rather than assumed identical. Choose the ATSAMD20E18A-AN when its documented peripherals meet the design requirements; choose the SAM D21 option only after confirming compatibility.
When should I choose ATSAMD20E18A-AN over ATSAMD20E18A-AU?
Choose the ATSAMD20E18A-AN ordering code when its package and delivery format match the product plan; choose ATSAMD20E18A-AU when that suffix is the required manufacturing configuration. The electrical architecture remains within the ATSAMD20E18A family, so the key decision is orderable-package and assembly fit rather than a change in core type. Confirm the package drawing, temperature grade, and quantity format on the Microchip product page before committing a PCB or production BOM.
Is ATSAMD20E18A-AN suitable for a home automation sensor node?
The ATSAMD20E18A-AN is well suited to a compact home-automation sensor node because it combines a 48 MHz Arm Cortex-M0+ core, 256 KB of flash, 32 KB of SRAM, and a 1.62 V minimum operating voltage. According to the Microchip ATSAMD20E18 datasheet, the device also supports -40°C to +105°C operation at a reduced 32 MHz maximum. It can execute protocol handling, periodic measurements, and local control while selected peripherals manage communications and sensor interfaces.
How does the ATSAMD20E18A-AN support low-power embedded designs?
The ATSAMD20E18A-AN supports low-power embedded designs by combining a compact Arm Cortex-M0+ core with a broad 1.62 V to 3.63 V operating range and multiple clock-performance options. The Microchip ATSAMD20E18 datasheet specifies up to 48 MHz from -40°C to +85°C and up to 32 MHz from -40°C to +105°C. Duty-cycled sensors can therefore spend more time idle between measurements, while product software can reduce operating frequency when thermal or power requirements call for it.
What is the lead time for ATSAMD20E18A-AN?
The current lead time for ATSAMD20E18A-AN should be requested through the Request a Quote form on this page rather than inferred from a generic catalog listing. Lead time can vary with order quantity, package variant, manufacturing schedule, and shipment destination. Provide the target quantity, delivery location, and required assembly date in the request so procurement can confirm the most appropriate supply plan for the exact ATSAMD20E18A-AN ordering code.
Where can I buy ATSAMD20E18A-AN online?
Use the Request a Quote form on this page to inquire about ATSAMD20E18A-AN availability, current commercial terms, and order quantity. The form supports a direct sourcing response for the exact 32-pin TQFP ordering code without relying on a generic inventory page. Include the required quantity, date code preference, shipment destination, and target delivery date when requesting a quote. This approach is especially useful for production builds where multiple order quantities may affect allocation.
What is the price of ATSAMD20E18A-AN?
The current commercial terms for ATSAMD20E18A-AN can be obtained through the Request a Quote form on this page. Quote processing accounts for order quantity, package variant, market conditions, and current supply, so a static unit-price statement would not reliably represent the offered configuration. Submit the required quantity and delivery destination with the request to receive a current response for the exact ATSAMD20E18A-AN part number.
Is ATSAMD20E18A-AN in stock?
Stock status for ATSAMD20E18A-AN should be confirmed through the Request a Quote form on this page. Availability can vary by quantity and manufacturing schedule, and a catalog search result does not guarantee allocation for a production order. Include the required order quantity, acceptable delivery date, and shipment destination in the request. The form allows procurement to establish an accurate supply commitment for the exact ATSAMD20E18A-AN configuration.

के लिए इंजीनियरिंग संदर्भ डेटा ATSAMD20E18A-AN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ATSAMD20E18A-AN when the product is being designed specifically around the ATSAMD20E18A family and needs 48 MHz Arm Cortex-M0+ performance, 256 KB of flash, 32 KB of SRAM, and operation from 1.62 V to 3.63 V in a 32-pin TQFP package. ATSAMD20E18A-AU is the closest same-family option when its delivery format matches the assembly plan, but the ordering suffix must still be checked. Consider ATSAMD21E18A-AU when its additional peripheral capabilities provide a clear benefit and the firmware, pin multiplexing, and clock configuration are validated. ATSAMC20E18A-AUT is relevant when AEC-Q100 Grade 1 qualification and documented drop-in compatibility are required. For every substitution, compare the manufacturer pin tables, memory map, peripheral assignments, operating limits, debug interface, and package drawing before releasing production firmware or artwork.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATSAMD20E18A-AU ATSAMD21E18A-AU ATSAMC20E18A-AUT
Package 32-TQFP (7x7) 32-TQFP (7x7) 32-TQFP (7x7) 32-TQFP (7x7)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB
Pin Count 32 pins 32 pins 32 pins 32 pins

मुख्य विशेषताएँ

  • Direct ATSAMD20E18A family fit (बनामATSAMD21E18A-AU)
  • Extended-temperature clock flexibility (बनामATSAMC20E18A-AUT)
  • Low-voltage operating range (बनामATSAMD20E18A-AU)

डिज़ाइन नोट्स

Design the supply network for the full 1.62 V to 3.63 V operating range and place the manufacturer-recommended decoupling capacitors close to the VDD and VDDIO pins. Check every attached peripheral for voltage compatibility at the 1.62 V minimum, especially input thresholds and pull-up networks. If a 3.3 V rail drives both the MCU and peripherals, verify startup sequencing and signal levels rather than assuming the MCU voltage tolerance also applies to every external device.

Use the package drawing and pin-description tables in the Microchip ATSAMD20E18 datasheet to assign all 32 TQFP pins. Route sensitive analog and communications signals away from fast-switching nodes, maintain continuous ground references beneath signal paths, and keep supply returns close to their associated pins. The exposed thermal behavior and exact land pattern should follow the manufacturer drawing for the selected ordering code rather than a generic 32-pin TQFP footprint.

Account for both temperature-grade and clock-rate limits during product planning. The family permits up to 48 MHz from -40°C to +85°C, but the maximum is 32 MHz from -40°C to +105°C. Configure firmware and the power plan so worst-case ambient temperature, regulator dissipation, and PCB heating do not exceed the operating assumptions. If the enclosure can exceed the lower grade's ambient limit, use the reduced-frequency configuration or select a suitably qualified MCU variant.

Do not treat ATSAMD20E18, ATSAMD21E18, and ATSAMC20E18 ordering codes as automatically interchangeable. Although the compared 32-pin TQFP options share a footprint, peripheral multiplexing, memory organization, clock behavior, and firmware requirements must be checked against the manufacturer pin tables and device documentation. Validate startup, communications pins, debug access, and brownout behavior on hardware before converting the design to a different family member.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The listing identifies ATSAMD20E18A-AN as a green 32-TQFP device, but a target-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 declaration was not confirmed. The ATSAMC20E18A-AUT cross-reference entry is identified as AEC-Q100 Grade 1 qualified; that qualification is not assigned to ATSAMD20E18A-AN.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ATSAMD20E18A-AN datasheet ATSAMD20E18A-AN datasheet pdf ATSAMD20E18A-AN pinout ATSAMD20E18A-AN specifications ATSAMD20E18A-AN equivalent ATSAMD20E18A-AN replacement ATSAMD20E18A-AN cross reference ATSAMD20E18A-AN price ATSAMD20E18A-AN stock Microchip ATSAMD20E18A-AN ATSAMD20E18A-AN 48MHz 256KB ATSAMD20E18A-AN TQFP-32 footprint ATSAMD20E18A-AN smart metering ATSAMD20E18A-AN vs ATSAMD21E18A-AU

संबंधित कंपोनेंट्स और शब्द

Microchip Technology ATSAMD20E18A-AN ATSAMD20E18A-AU ATSAMD21E18A-AU ATSAMC20E18A-AUT ATSAMD20E18 Arm Cortex-M0+ ARM architecture microcontroller embedded microcontroller 32-bit RISC flash memory SRAM semiconductor 32-pin TQFP TQFP package family surface-mount package 1.62 V to 3.63 V operation 48 MHz 256 KB flash 32 KB SRAM smart metering home automation industrial sensor node
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें