ATSAMD20E18A-AN - 48MHz 256KB Cortex-M0+ MCU | Microchip
MPN: ATSAMD20E18A-AN ✓ Hoạt độngATSAMD20E18A-AN Tóm tắt
An ARM Cortex-M0+ microcontroller is a 32-bit embedded processor designed around the Arm Thumb instruction set. It belongs to the microcontroller hierarchy, combining a CPU core, embedded nonvolatile memory, SRAM, general-purpose I/O, timers, and communication interfaces on one integrated device. Compared with a general-purpose application processor, the Cortex-M0+ architecture emphasizes deterministic control, compact software, and efficient peripheral-driven operation. The ATSAMD20E18 family targets applications where predictable response and low system complexity are more important than workstation-class computing.
The ATSAMD20E18A-AN provides 256 KB of flash for firmware, boot code, configuration data, and application routines. Its 32 KB of SRAM supports working data, stack operations, buffers, and real-time control tasks. Operation to 48 MHz allows the core to execute control loops and protocol handling efficiently, while the 1.62 V to 3.63 V supply range accommodates common low-voltage embedded systems. The green 32-TQFP package supports compact PCB layouts and is specified for operation from -40°C to +105°C.
The device architecture is organized around a 32-bit Cortex-M0+ processor, embedded flash, SRAM, GPIO, and dedicated serial peripherals. At 1.62 V through 3.63 V, the core can operate up to 48 MHz; the family datasheet also identifies reduced 32 MHz operation for higher-temperature conditions. This combination gives designers useful clocking flexibility when power, temperature, or peripheral performance limits must be balanced. The integration also reduces external component count by placing the core, memory, and communication functions in one device.
Typical uses include smart-metering equipment, connected home devices, industrial controllers, sensor nodes, consumer appliances, and compact automation products. In a metering design, the MCU can combine timer-based measurement, serial communication, and local data processing. In a sensor node, its low-voltage operation and multiple low-power states can simplify duty-cycled operation. For communication equipment, it can manage a local serial link and execute application logic without requiring an external processor.
Designers should pay close attention to the 1.62 V minimum operating voltage, especially when using 1.8 V sensors or radio modules. Confirm pin-level multiplexing, peripheral instance assignments, clock settings, and package dimensions against the Microchip ATSAMD20E18 datasheet before schematic capture. Decoupling and signal-return paths should follow the recommended layout practices to reduce switching noise and preserve reliable peripheral timing.
This product overview combines the confirmed ATSAMD20E18A-AN operating specifications with practical guidance for low-voltage embedded designs. It also organizes same-footprint Microchip alternatives, application considerations, and engineering checks to help accelerate component selection and PCB planning without obscuring the distinctions between package, temperature, and feature variants.
Bộ thay thế dễ dàng lắp đặt cho ATSAMD20E18A-AN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATSAMD20E18A-AN (cùng hình factor và footprint) — khác nhau ở Package, ADC, SRAM, Flash Memory, MSL Level.
ATSAMD20E18A-AU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAMD21E18A-AU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAMC20E18A-AUT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAMD20E18A-AN Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M0+ flash microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 32 KB |
| Operating Supply Voltage Range | 1.62 V to 3.63 V |
| Architecture | 32-bit RISC |
| Hộp | 32-pin TQFP, 7 x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Industrial Temperature Range | -40°C to +85°C |
| Extended Temperature Range | -40°C to +105°C |
| Maximum CPU Frequency at -40°C to +85°C | 48 MHz |
| Maximum CPU Frequency at -40°C to +105°C | 32 MHz |
| Green Manufacturing Classification | Green |
Hướng dẫn cấu hình chân ATSAMD20E18A-AN 32-pin tqfp, 7 x 7 mm
Cấu hình chân cho ATSAMD20E18A-AN (32-pin tqfp, 7 x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATSAMD20E18A-AN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATSAMD20E18A-AN phù hợp cho 6 Áp dụngs: Smart Metering, Home Automation, Industrial Sensor Node, Consumer Appliance Control, Connected Equipment Gateway, Data Acquisition and Control.
Smart Metering
The ATSAMD20E18A-AN suits smart-metering controllers that must combine timing-sensitive measurement, local data processing, and serial communications. Its Arm Cortex-M0+ core operates up to 48 MHz, while 256 KB of flash holds measurement routines, communication stacks, and calibration data, and 32 KB of SRAM supports working buffers. The 1.62 V to 3.63 V operating range accommodates low-energy sensor and communication circuitry. At temperatures above the 48 MHz industrial limit, the MCU can be configured for up to 32 MHz through -40°C to +105°C, allowing one controller design to cover both metering and extended-temperature environments.
Được đề xuất
Home Automation
The ATSAMD20E18A-AN can serve as the local controller in a compact home-automation node that coordinates sensors, actuators, and communications. Its 48 MHz Cortex-M0+ processor provides adequate throughput for protocol handling and event-driven control, while 256 KB of flash and 32 KB of SRAM support connected-device firmware without an external memory device. The wide 1.62 V minimum supply supports common low-voltage power trees. Product developers can use the extended-temperature capability of 32 MHz operation from -40°C to +105°C for indoor equipment exposed to elevated enclosure temperatures.
Được đề xuất
Industrial Sensor Node
The ATSAMD20E18A-AN fits low-power industrial sensor nodes that periodically acquire measurements, filter data, and report through a local serial link. The 1.62 V to 3.63 V range gives designers flexibility when powering the MCU from low-energy sources or regulated sensor rails. With 256 KB of flash and 32 KB of SRAM, the device can maintain firmware, calibration tables, sample buffers, and communication state on-chip. It can run at 48 MHz through -40°C to +85°C, or reduce the maximum to 32 MHz for operation through -40°C to +105°C.
Được đề xuất
Consumer Appliance Control
The ATSAMD20E18A-AN can manage motor, display, and communication tasks in a compact consumer appliance controller. Its 48 MHz Cortex-M0+ core supports responsive state-machine control, and the on-chip 256 KB flash and 32 KB SRAM reduce system complexity by holding application code, user settings, and working buffers locally. The 1.62 V minimum operating voltage is useful for low-voltage mixed-signal systems, while the 32-pin TQFP package supports compact, high-density layouts. Firmware designers should use the device sleep modes and peripheral clock controls to reduce standby consumption.
Được đề xuất
Connected Equipment Gateway
The ATSAMD20E18A-AN is appropriate for a local equipment gateway that translates between sensors, actuators, and a host communications interface. Its 48 MHz processing capability allows concurrent handling of timers, packet processing, and control logic, while 256 KB of flash accommodates a bootloader and application firmware. The 32 KB SRAM region can hold communication buffers and state machines. Its 1.62 V to 3.63 V supply range supports integration with low-voltage radios and sensors, and its 7 x 7 mm TQFP package helps reduce board area in densely packaged industrial equipment.
Được đề xuất
Data Acquisition and Control
The ATSAMD20E18A-AN supports compact data-acquisition and deterministic control systems requiring local processing close to sensors or actuators. The 48 MHz Arm Cortex-M0+ core can service timers and communications while 32 KB of SRAM provides space for acquisition buffers. Its 256 KB flash stores configuration, calibration, and application code, while the 1.62 V to 3.63 V range enables use with low-voltage analog front ends. For extended-temperature installations, the device supports up to 32 MHz from -40°C to +105°C, trading peak processing rate for broader environmental tolerance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATSAMD20E18A-AN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATSAMD20E18A-AU | ATSAMD21E18A-AU | ATSAMC20E18A-AUT |
|---|---|---|---|---|
| Package | 32-TQFP (7x7) | 32-TQFP (7x7) | 32-TQFP (7x7) | 32-TQFP (7x7) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB |
| Pin Count | 32 pins | 32 pins | 32 pins | 32 pins |
Bảo phân biệt quan trọng
- Direct ATSAMD20E18A family fit (vsATSAMD21E18A-AU)
- Extended-temperature clock flexibility (vsATSAMC20E18A-AUT)
- Low-voltage operating range (vsATSAMD20E18A-AU)
Ghi chú thiết kế
Design the supply network for the full 1.62 V to 3.63 V operating range and place the manufacturer-recommended decoupling capacitors close to the VDD and VDDIO pins. Check every attached peripheral for voltage compatibility at the 1.62 V minimum, especially input thresholds and pull-up networks. If a 3.3 V rail drives both the MCU and peripherals, verify startup sequencing and signal levels rather than assuming the MCU voltage tolerance also applies to every external device.
Use the package drawing and pin-description tables in the Microchip ATSAMD20E18 datasheet to assign all 32 TQFP pins. Route sensitive analog and communications signals away from fast-switching nodes, maintain continuous ground references beneath signal paths, and keep supply returns close to their associated pins. The exposed thermal behavior and exact land pattern should follow the manufacturer drawing for the selected ordering code rather than a generic 32-pin TQFP footprint.
Account for both temperature-grade and clock-rate limits during product planning. The family permits up to 48 MHz from -40°C to +85°C, but the maximum is 32 MHz from -40°C to +105°C. Configure firmware and the power plan so worst-case ambient temperature, regulator dissipation, and PCB heating do not exceed the operating assumptions. If the enclosure can exceed the lower grade's ambient limit, use the reduced-frequency configuration or select a suitably qualified MCU variant.
Do not treat ATSAMD20E18, ATSAMD21E18, and ATSAMC20E18 ordering codes as automatically interchangeable. Although the compared 32-pin TQFP options share a footprint, peripheral multiplexing, memory organization, clock behavior, and firmware requirements must be checked against the manufacturer pin tables and device documentation. Validate startup, communications pins, debug access, and brownout behavior on hardware before converting the design to a different family member.
Thông tin tuân thủ
The listing identifies ATSAMD20E18A-AN as a green 32-TQFP device, but a target-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 declaration was not confirmed. The ATSAMC20E18A-AUT cross-reference entry is identified as AEC-Q100 Grade 1 qualified; that qualification is not assigned to ATSAMD20E18A-AN.