Microchip Technology

ATSAMD51P20A-AU - 120MHz Cortex-M4F MCU | Microchip

MPN: ATSAMD51P20A-AU ✓ सक्रिय
3.3 V Vdss 128-lead TQFP (14 x 14 mm) Package 120 MHz Speed 1 MB (1M x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATSAMD51P20A-AU अवलोकन

The Microchip Technology ATSAMD51P20A-AU is a 32-bit ARM Cortex-M4F microcontroller with a floating-point unit, operating up to 120 MHz and containing 1 MB of dual-panel flash with ECC in a 128-lead TQFP package measuring 14 x 14 mm. It belongs to the SAM D51 series of general-purpose microcontrollers, combining high processing performance with substantial on-chip memory for embedded control designs.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one device. The ARM Cortex-M4F core provides a 32-bit instruction set and single-precision floating-point hardware, while the SAM D51 family extends that architecture with embedded flash, SRAM, communication interfaces, analog peripherals, and dedicated external-control hardware. This places the device in the hierarchy of embedded processor, microcontroller, and general-purpose control IC.

Principal features include a 120 MHz maximum clock speed, 1 MB of flash memory, up to 256 KB of SRAM with ECC, and a 128-lead TQFP package. The SAM D51 series is positioned for general-purpose applications that require more processing capability and I/O than small 8- or 16-bit controllers. USB, serial communications, and analog conversion capabilities make the device applicable to connected control systems, data acquisition, and industrial equipment.

The Cortex-M4F architecture supports efficient digital signal processing and real-time control while retaining a conventional microcontroller development model. Dual-panel flash with ECC improves the integrity of program storage, while ECC-protected SRAM supports reliable operation in systems where data integrity matters. The large peripheral mix reduces the need for external devices when implementing motor, communications, and measurement functions.

Typical uses include industrial automation, building and energy control, connected embedded products, medical and diagnostic equipment, and instrumentation. The 128-pin package provides a high peripheral count for designs that need numerous I/O, communication ports, timer channels, and analog inputs while remaining on a conventional surface-mount PCB.

When laying out a board, treat the 14 x 14 mm TQFP as a fine-pitch package and route power, ground, decoupling, and programming signals according to the Microchip pin-description and layout guidance. Verify the exact package pin mapping in the manufacturer datasheet before assigning signals, since alternate functions can be multiplexed across many of the 128 leads.

This page consolidates the verified device description, package and memory characteristics, drop-in order-code alternatives, and application-focused engineering guidance. It also distinguishes electrically equivalent ordering options from packages or device families that would require a different PCB footprint, helping designers assess replacement options before committing to a layout.

के लिए ड्रॉप-इन विकल्प ATSAMD51P20A-AU — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATSAMD51P20A-AU (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Package.

Microchip Technology
Flash Memory: 1 MB (1M x 8) with ECC, dual-panel
Package: 128-TQFP (14 x 14 mm)
इसके साथ तुलना करें ATSAMD51P20A-AU →

ATSAMD51P20A-AF

✅ ड्रॉप-इन
📦 128-lead TQFP (14 x 14 mm)
Same SAM D51 core, 120 MHz operation, and 1 MB flash configuration; ordering suffix changes the grade or qualification option, with no core-frequency difference.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMD51P20A-AZ

✅ ड्रॉप-इन
📦 128-lead TQFP (14 x 14 mm)
Same SAM D51 P20A configuration and 120 MHz Cortex-M4F performance; the -AZ suffix is an alternate grade or ordering option rather than a different memory size.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMD51P20A-AFT

✅ ड्रॉप-इन
📦 128-lead TQFP (14 x 14 mm)
Same SAM D51 device family, 120 MHz Cortex-M4F core, and 1 MB flash density; the -AFT ordering suffix changes temperature or packing options.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMD51P20A-AU-EFP

✅ ड्रॉप-इन
📦 128-lead TQFP (14 x 14 mm)
Same 120 MHz Cortex-M4F core, 1 MB flash, and 128-lead TQFP footprint; the EFP suffix denotes extended flash performance and requires firmware-timing review.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMD51P20A-AU Maximum Ratings और Electrical Characteristics

Product Type 32-bit ARM Cortex-M4F microcontroller
Manufacturer Microchip Technology
Series SAM D51
CPU Core ARM Cortex-M4 with FPU
Maximum CPU Frequency 120 MHz
Flash Memory 1 MB (1M x 8)
Flash Architecture Dual-panel flash with ECC
Maximum SRAM 256 KB with ECC
ऑपरेटिंग सप्लाई वोल्टेज 3.3 V
पैकेज 128-lead TQFP (14 x 14 mm)
माउंटिंग प्रकार Surface mount
Maximum Temperature 85 °C
Interface Feature USB
Bit Width 32 bit
Processor Core ARM Cortex-M4F

ATSAMD51P20A-AU 128-lead tqfp (14 x 14 mm) पिन कॉन्फ़िगरेशन गाइड

ATSAMD51P20A-AU (128-lead tqfp (14 x 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATSAMD51P20A-AU के लिए 128-lead tqfp (14 x 14 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATSAMD51P20A-AU.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATSAMD51P20A-AU के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Connected Sensor Gateway, Real-Time Signal Conditioning, Building and HVAC Control, Medical and Diagnostic Instrumentation, Motor and Power System Control.

🏭

Industrial Automation Controller

The ATSAMD51P20A-AU fits industrial automation controllers that combine real-time control with network-facing communications. Its ARM Cortex-M4F core operates up to 120 MHz, providing headroom for control loops, communications stacks, and supervisory logic, while 1 MB of flash supports a bootloader and substantial application firmware. ECC-protected dual-panel flash and up to 256 KB of SRAM improve reliability where control state must be preserved. The 128-lead TQFP also exposes a broad set of I/O for sensors, actuators, and field-bus transceivers. Firmware should use hardware timestamp counters and timers for deterministic sampling, while the board must provide clean decoupling, local analog ground partitioning, and robust ESD protection on externally accessible lines.

🧩

Connected Sensor Gateway

The ATSAMD51P20A-AU is appropriate for a connected sensor gateway that aggregates readings from multiple peripherals and forwards them over USB or another serial interface. The 120 MHz Cortex-M4F core can process protocol framing and filtering while leaving resources for local data acquisition. With 1 MB of dual-panel flash with ECC, the device provides ample room for firmware, configuration, and diagnostic data, and the SRAM supports packet buffering. Its 128-lead package makes numerous I/O available for SPI and I2C sensor buses without requiring large external interface expanders. A practical design should isolate analog inputs from switching regulators, route communications away from high-current outputs, and validate the USB or communications power path against the system load.

📈

Real-Time Signal Conditioning

The ATSAMD51P20A-AU suits real-time signal-conditioning and digital-filtering modules because the Cortex-M4F core combines a 32-bit pipeline with hardware single-precision floating-point support at up to 120 MHz. The floating-point unit accelerates filtering, calibration, and control algorithms without requiring a separate DSP. Its 1 MB flash provides room for lookup tables and complex algorithms, while ECC-protected SRAM supports working buffers. The 128-lead TQFP offers sufficient pin count for analog inputs, timer channels, and external memory or communications interfaces. For accurate results, keep the analog front end local to the MCU, use a separate analog supply section, and allow for settling time between acquisition and conversion rather than processing immediately after each edge.

🏠

Building and HVAC Control

The ATSAMD51P20A-AU can serve as the central controller in building and HVAC equipment that must manage sensors, relays, displays, and communications in one compact module. Its 120 MHz Cortex-M4F performance supports multitasking among control loops, user-interface updates, and network handling, and 1 MB of flash accommodates protocol stacks and field-service data. The 128-lead TQFP provides enough I/O for temperature inputs, fan or valve outputs, and serial transceivers. Because environmental and mains-adjacent interfaces are common in this application, the design should maintain separation between logic and power grounds, use transient-voltage protection on exposed wiring, and validate timing under full relay-load transients.

💊

Medical and Diagnostic Instrumentation

The ATSAMD51P20A-AU fits laboratory and diagnostic instrumentation requiring deterministic embedded control, data logging, and USB connectivity. The 120 MHz Cortex-M4F core can execute measurement algorithms and communicate with a host computer, while the ECC-protected flash and SRAM support dependable handling of calibration and operating data. The 128-lead TQFP provides a substantial pin budget for sensor inputs, status indicators, and isolated communication interfaces. In these systems, maintain analog and digital ground separation, use low-noise local regulation for sensitive measurement circuits, and validate leakage, isolation, and ESD requirements against the intended medical equipment category before production release.

⚡

Motor and Power System Control

The ATSAMD51P20A-AU is suitable for coordinating motors, valves, and power-conversion peripherals in supervisory control systems. The 120 MHz Cortex-M4F core provides enough performance for PWM timing, current or position supervision, and fault handling, while the large peripheral count available in the 128-lead package simplifies mixed-signal connections. The 1 MB flash supports layered control firmware and field diagnostics. Design the PCB so switching nodes and motor traces remain physically separated from analog and communication nets, use dedicated gate-driver interfaces rather than driving loads directly from GPIO pins, and include current sensing and shutdown paths that operate independently of the main firmware loop.

What is the ATSAMD51P20A-AU?
The ATSAMD51P20A-AU is a Microchip Technology SAM D51 general-purpose microcontroller built around a 32-bit ARM Cortex-M4F processor with a floating-point unit. According to the manufacturer product page, it runs up to 120 MHz, provides up to 1 MB of dual-panel flash with ECC, and offers up to 256 KB of SRAM with ECC. The device is supplied in a 128-lead TQFP package measuring 14 x 14 mm.
What are the key specifications of ATSAMD51P20A-AU?
The ATSAMD51P20A-AU combines a 120 MHz ARM Cortex-M4F core, 1 MB of dual-panel flash with ECC, up to 256 KB of SRAM with ECC, and USB connectivity in a 128-lead TQFP package. The Microchip product description identifies the SAM D51 family as a general-purpose MCU series with a 32-bit processor and floating-point unit. It is suited to control, connectivity, analog measurement, and real-time embedded applications.
Where can I download the ATSAMD51P20A-AU datasheet PDF?
The ATSAMD51P20A-AU datasheet and supporting documents are available through the official Microchip product page for the ATSAMD51P20A. The manufacturer page links the device data, pinout, and supporting documentation. Use the pin-description table and package drawings from those documents before laying out a 128-lead PCB, because several peripheral functions are multiplexed across the same pins.
Where can I find the ATSAMD51P20A-AU pinout?
The ATSAMD51P20A-AU pinout is documented in the Microchip device data and package documentation for the 128-lead TQFP option. The device also has a 120-ball TFBGA variant in the same base family, so package selection must be confirmed before using a pin-assignment chart. Use the manufacturer pin-description table to determine each lead's primary and alternate functions.
What can replace the ATSAMD51P20A-AU?
The closest drop-in choices are Microchip order-code variants that retain the same 128-lead TQFP footprint and the SAM D51 device function. ATSAMD51P20A-AF, ATSAMD51P20A-AZ, ATSAMD51P20A-AFT, and ATSAMD51P20A-AU-EFP are documented alternatives, but temperature grade, flash performance, and ordering options differ. Confirm the exact suffix requirements before substituting any of them.
Is ATSAMD51P20A-AF pin compatible with ATSAMD51P20A-AU?
The ATSAMD51P20A-AF is a Microchip SAM D51 order-code alternative documented for the same 128-pin PQFP-class footprint, but it is not an exact functional match for every purchasing requirement. Temperature grade, qualification, and order-code options can differ from the ATSAMD51P20A-AU. Treat it as a drop-in candidate only after checking the package drawing and device-specific temperature requirements.
When should I choose ATSAMD51P20A-AU over ATSAMD51P20A-AZ?
Choose the ATSAMD51P20A-AU when the required temperature grade and commercial ordering configuration match the -AU suffix. The ATSAMD51P20A-AZ provides an alternate grade within the same SAM D51 family and the same documented package family, so the decision is usually driven by qualification temperature rather than core performance. Both reach 120 MHz and use the 1 MB flash configuration associated with the P20A device.
What is the difference between ATSAMD51P20A-AU and ATSAMD51P20A-AU-EFP?
The ATSAMD51P20A-AU-EFP is documented as a 120 MHz Cortex-M4F microcontroller with 1 MB flash in a 128-lead TQFP package and an extended-flash-performance designation. It shares the core speed, memory density, and footprint of the ATSAMD51P20A-AU. The EFP ordering option changes the flash-performance configuration, so firmware timing and qualification assumptions must be reviewed before substitution.
Is there a cross-brand drop-in replacement for ATSAMD51P20A-AU?
No verified cross-brand 128-lead TQFP drop-in replacement was identified for the ATSAMD51P20A-AU. The published alternatives are Microchip order-code variants because software support, peripheral mapping, and package details are tightly associated with the SAM D51 family. A competitor device with similar CPU speed should be treated as a board redesign unless its package and peripheral configuration are demonstrated to be equivalent.
Where can I buy ATSAMD51P20A-AU online?
Use the Request a Quote form on this page to request ATSAMD51P20A-AU availability, current unit pricing, quantity breaks, and lead time. Quote requests also help confirm the required packaging method, because the same device can be ordered with different packing suffixes. A procurement request should state the 128-lead TQFP requirement and the production quantity needed.
What is the price of ATSAMD51P20A-AU?
Current ATSAMD51P20A-AU pricing depends on order quantity, packaging, and market conditions. Submit the part number and required quantity through the Request a Quote form on this page for a current quotation. The form is the appropriate channel for volume pricing, scheduled deliveries, and factory-programmed requirements without relying on a static price that may no longer reflect availability.
What is the lead time for ATSAMD51P20A-AU?
The current lead time should be confirmed through the Request a Quote form on this page after the required quantity and packing configuration are specified. Lead time can vary with procurement volume, supply status, and whether the shipment is tray-packed, reel-packed, or factory programmed. Including a complete forecast and target delivery date in the request improves scheduling accuracy.
Is ATSAMD51P20A-AU in stock?
ATSAMD51P20A-AU availability changes with order volume and packaging configuration. Use the Request a Quote form on this page to request current stock allocation and a delivery schedule for the quantity you need. For production planning, provide your required date and indicate whether partial delivery or scheduled split shipments would be acceptable.
Does the ATSAMD51P20A-AU include floating-point hardware?
Yes, the ATSAMD51P20A-AU uses an ARM Cortex-M4F core, and the F designation identifies the integrated single-precision floating-point unit. According to the Microchip product description, the processor is a 32-bit ARM Cortex-M4 with an FPU operating up to 120 MHz. This reduces software overhead for real-time control, filtering, and signal-processing workloads compared with an integer-only Cortex-M core.
Can ATSAMD51P20A-AU be used for industrial control applications?
The ATSAMD51P20A-AU is suitable for general-purpose industrial control when its 85 °C maximum temperature and package options meet the system requirements. Its 120 MHz Cortex-M4F core, 1 MB flash, ECC-protected memory, USB, and extensive I/O support real-time control, communications, and analog measurement. Confirm the exact suffix, temperature grade, and peripheral pin mapping for each industrial design.

के लिए इंजीनियरिंग संदर्भ डेटा ATSAMD51P20A-AU — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ATSAMD51P20A-AU when the design requires the established SAM D51 combination of a 120 MHz ARM Cortex-M4F core, 1 MB of ECC-protected dual-panel flash, up to 256 KB of ECC-protected SRAM, USB, and a 128-lead TQFP footprint. It is a strong fit for industrial controllers, connected measurement modules, and real-time embedded products that need substantial I/O and flash space. ATSAMD51P20A-AF and ATSAMD51P20A-AZ are sensible footprint-compatible options when the required grade or qualification differs, while ATSAMD51P20A-AFT offers another ordering route within the same device family. Select ATSAMD51P20A-AU-EFP only when the extended-flash-performance configuration has been reviewed against firmware timing requirements. The 85 °C maximum rating of the -AU ordering option must fit the enclosure temperature, and no competitor-family MCU should be treated as drop-in without a documented pin-, peripheral-, and software-level equivalence review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATSAMD51P20A-AF ATSAMD51P20A-AZ ATSAMD51P20A-AFT ATSAMD51P20A-AU-EFP
Package 128-lead TQFP (14 x 14 mm) 128-lead TQFP (14 x 14 mm) 128-lead TQFP (14 x 14 mm) 128-lead TQFP (14 x 14 mm) 128-lead TQFP (14 x 14 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Core ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F
Maximum Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 1 MB (1M x 8) 1 MB 1 MB 1 MB 1 MB
Maximum SRAM 256 KB with ECC 256 KB with ECC 256 KB with ECC 256 KB with ECC 256 KB with ECC
USB Connectivity USB USB USB USB USB
Ordering Configuration -AU suffix -AF suffix -AZ suffix -AFT suffix -AU-EFP suffix with extended flash performance

मुख्य विशेषताएँ

  • High-performance Cortex-M4F control with substantial on-chip memory (बनामATSAMD51P20A-AF)
  • Same-footprint choice with extended flash performance (बनामATSAMD51P20A-AU-EFP)
  • Broad I/O and mixed-signal integration in one package (बनामATSAMD51P20A-AZ)

डिज़ाइन नोट्स

Place the MCU close to the supporting circuitry assigned by the pin-multiplexing plan, but keep analog, communications, and high-current interfaces in their own physical regions. Follow the manufacturer package drawings for the 14 x 14 mm TQFP land pattern, fanout, and exposed routing rules. The 128-lead footprint has a fine lead pitch, so use consistent pad geometry, check annular rings after fabrication, and verify that the assembly house can place the selected package without bridging.

Estimated: if the 3.3 V rail supplies a 20 mA load and the device's own current is not added, the rail dissipates about 66 mW in the MCU supply path. Actual total rail demand can be higher once peripherals and external I/O are included, so size the regulator and copper area for the complete board rather than the core alone. Keep high-current loads on separate branches and use local bulk and high-frequency decoupling at the device supply pins.

Route externally accessible serial, USB, and debug signals away from switching or motor nodes, and provide series damping where edge rates require it. Use a continuous ground plane where possible and avoid splitting return paths beneath high-speed nets. Because the TQFP leads are densely spaced, watch for accidental shorts during rework and use a microscope when inspecting fine-pitch soldering. Validate USB, clock, and programming interfaces with appropriate termination and test equipment.

Do not assume that every similarly suffixed SAM D51 order code is a purchasing substitute. The EFP option changes flash-performance characteristics, while AF, AZ, AFT, and AU can denote different grade or ordering configurations. Before replacement, compare the package drawing, temperature range, flash timing, qualification status, and programming documentation. Software should also be rebuilt and tested against the exact device revision selected for production.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The ATSAMD51P20A-AU is presented by Microchip as a current general-purpose microcontroller, but the verified device information does not state the individual RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Review the manufacturer product page and the applicable material-declaration documents before making a compliance claim.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

atsamd51p20a aut ATSAMD51P20A-AU datasheet ATSAMD51P20A-AU datasheet pdf ATSAMD51P20A-AU pinout ATSAMD51P20A-AU specifications ATSAMD51P20A-AU replacement ATSAMD51P20A-AU equivalent ATSAMD51P20A-AU price ATSAMD51P20A-AU stock ATSAMD51P20A-AU vs ATSAMD51P20A-AF ATSAMD51P20A TQFP 128 pinout ATSAMD51P20A 120MHz Cortex-M4F Microchip ATSAMD51P20A ATSAMD51P20A industrial control application ATSAMD51P20A USB microcontroller

संबंधित कंपोनेंट्स और शब्द

Microchip Technology ATSAMD51P20A-AU ATSAMD51P20A ATSAMD51P20A-AF ATSAMD51P20A-AZ ATSAMD51P20A-AFT ATSAMD51P20A-AU-EFP SAM D51 ARM Cortex-M4F ARM Cortex-M4 floating-point unit general-purpose microcontroller embedded processor 32-bit microcontroller 1 MB dual-panel flash ECC-protected SRAM 128-lead TQFP TQFP package family 14 x 14 mm surface-mount package USB industrial automation connected sensor gateway real-time signal conditioning medical instrumentation motor and power system control
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें