Microchip Technology

ATXMEGA64A1U-AU - 32MHz 64KB AVR MCU | Microchip

MPN: ATXMEGA64A1U-AU ✓ सक्रिय
1.6 V to 3.6 V Vdss 100-pin TQFP (14 mm x 14 mm) Package 32 MHz Speed 64 KB (32K x 16) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATXMEGA64A1U-AU अवलोकन

The Microchip Technology ATXMEGA64A1U-AU is a low-power, high-performance 8/16-bit AVR XMEGA microcontroller with a 32 MHz clock, 64 KB self-programming Flash memory, 4 KB SRAM, and 2 KB EEPROM. The device operates from 1.6 V to 3.6 V and is packaged in a 100-pin TQFP measuring 14 mm by 14 mm.

An 8/16-bit AVR XMEGA microcontroller is an embedded-processing device that combines an AVR RISC core, programmable memories, real-time control peripherals, and serial interfaces in one integrated circuit. The XMEGA family extends the familiar AVR architecture with an event system, direct memory access, flexible timing channels, and enhanced interrupt handling, making it suitable for control-intensive systems requiring deterministic peripheral coordination.

The ATXMEGA64A1U-AU includes 64 KB of self-programming Flash, organized as 32K by 16 words, together with a 4 KB boot-code section. Its 4 KB SRAM supports working data, while 2 KB of EEPROM provides nonvolatile storage. Integrated resources include a four-channel DMA controller, an eight-channel event system, an external bus interface, and communication peripherals supporting I2C, SPI, UART, and IrDA-oriented applications.

The ATXMEGA64A1U-AU also integrates a 12-bit analog subsystem. Available descriptions identify a 16-channel, 12-bit ADC and four 12-bit DAC channels. These converters allow the controller to acquire sensor data and generate controlled analog voltage levels without requiring separate converters in every design. Its 32 MHz maximum operating frequency supports responsive protocol handling and multi-peripheral operation within a compact embedded platform.

Typical applications include industrial control modules, data-acquisition equipment, communications controllers, building automation, instrumentation, and low-power embedded products. The combination of 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, DMA, event-system hardware, and analog conversion is particularly useful when firmware must coordinate multiple sensors and communications interfaces without excessive CPU intervention.

PCB design should preserve clean analog and digital power distribution, route sensitive analog signals away from switching nodes, and follow the manufacturer’s pin and decoupling recommendations. Firmware planning should account for boot code, self-programming behavior, memory organization, and the interactions among DMA, timers, and the event system. The AU ordering code identifies the specified temperature, package, and reel configuration.

This product page consolidates the manufacturer specifications, ordering details, technical comparisons, and practical design guidance needed to evaluate the ATXMEGA64A1U-AU for a new embedded-control design.

के लिए ड्रॉप-इन विकल्प ATXMEGA64A1U-AU — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATXMEGA64A1U-AU (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, External Bus Interface, General-Purpose I/O, RoHS Status, Timer/Counter Count.

Microchip Technology
Package: 100-pin TQFP (14 x 14 mm)
External Bus Interface: Present
General-Purpose I/O: 78 lines
इसके साथ तुलना करें ATXMEGA64A1U-AU →
Microchip Technology
Package: 100-CBGA (9 x 9 mm)
RoHS Status: Compliant
इसके साथ तुलना करें ATXMEGA64A1U-AU →

ATXMEGA64A1U

✅ ड्रॉप-इन
📦 100-pin TQFP (14 mm x 14 mm)
Base ordering code with 0 MHz clock difference, 0 KB Flash difference, 0 KB SRAM difference, and 0 KB EEPROM difference; temperature and reel suffix must be confirmed

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATXMEGA64A1U-ANR

✅ ड्रॉप-इन
📦 100-pin TQFP (14 mm x 14 mm)
0 MHz clock difference, 0 KB Flash difference, 0 KB SRAM difference, and 0 KB EEPROM difference; ordering-code qualification and reel configuration differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATXMEGA64A1U-AUR

✅ ड्रॉप-इन
📦 100-pin TQFP (14 mm x 14 mm)
0 MHz clock difference, 0 KB Flash difference, 0 KB SRAM difference, and 0 KB EEPROM difference; ordering-code and reel configuration differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATXMEGA64A1U-CU

✅ ड्रॉप-इन
Microchip Technology
📦 100-pin TQFP (14 mm x 14 mm)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 64 KB (32K x 16) · 4 KB · 4 KB · 2 KB · 1.6 V to 3.6 V · 4 channels

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATXMEGA64A1U-CUR

✅ ड्रॉप-इन
📦 100-pin TQFP (14 mm x 14 mm)
0 MHz clock difference, 0 KB Flash difference, 0 KB SRAM difference, and 0 KB EEPROM difference; ordering-code and reel configuration differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATXMEGA64A1U-AU Maximum Ratings और Electrical Characteristics

Product Type 8/16-bit AVR XMEGA microcontroller
अधिकतम क्लॉक फ़्रीक्वेंसी 32 MHz
Operating Voltage Range 1.6 V to 3.6 V
Flash Memory 64 KB (32K x 16)
Self-Programming Flash Supported
Boot Code Section 4 KB
SRAM 4 KB
EEPROM 2 KB
ADC Resolution and Channels 12-bit, 16 channels
DAC Resolution and Channels 12-bit, 4 channels
DMA Controller 4 channels
Event System 8 channels
External Bus Interface 1 interface
General-Purpose I/O Up to 78 lines
Timer/Counter Count 8 timers/counters
Real-Time Counter 16-bit
पैकेज 100-pin TQFP (14 mm x 14 mm)
माउंटिंग प्रकार Surface mount
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification unknown

ATXMEGA64A1U-AU 100-pin tqfp (14 mm x 14 mm) पिन कॉन्फ़िगरेशन गाइड

ATXMEGA64A1U-AU (100-pin tqfp (14 mm x 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATXMEGA64A1U-AU के लिए 100-pin tqfp (14 mm x 14 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATXMEGA64A1U-AU.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATXMEGA64A1U-AU के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor and Control Hub, Communications Controller, Data-Acquisition Instrument, Building Automation Controller, Precision Analog Test Equipment, Low-Power Embedded Gateway.

🏭

Industrial Sensor and Control Hub

The ATXMEGA64A1U-AU fits an industrial sensor hub that must acquire multiple analog inputs and respond through several digital outputs without relying on a separate converter subsystem. Its 16-channel, 12-bit ADC supports sensor conditioning, while four 12-bit DAC channels can generate control or reference voltages. The 32 MHz core provides scheduling headroom, and the four-channel DMA controller can transfer sampled data with reduced CPU involvement. The 1.6 V to 3.6 V operating range supports compact low-voltage equipment, provided that the manufacturer’s power, grounding, and analog-reference requirements are followed.

🌐

Communications Controller

The ATXMEGA64A1U-AU is suitable for a communications controller that must maintain multiple peripheral data paths while responding to precise timing events. Its external bus interface, four-channel DMA controller, eight-channel event system, and eight timer/counters allow data transfer and protocol timing to be divided between dedicated hardware and firmware. The 64 KB self-programming Flash supports application code and update-oriented bootloader designs, while 4 KB SRAM accommodates active protocol buffers. This architecture is particularly useful in gateways, protocol translators, and compact interface modules operating from a 1.6 V to 3.6 V supply.

📟

Data-Acquisition Instrument

The ATXMEGA64A1U-AU supports a compact data-acquisition instrument requiring digital control and analog measurement in one package. The 16-channel, 12-bit ADC can collect sensor signals, while the four 12-bit DAC channels support excitation, calibration, or analog-output tests. At up to 32 MHz, the AVR core can manage acquisition sequencing and communications concurrently. The 64 KB Flash provides room for calibration tables and control firmware, and the separate 4 KB boot-code section can reserve memory for field upgrades.

🧩

Building Automation Controller

The ATXMEGA64A1U-AU is well matched to building-automation controllers that combine analog sensing, scheduled outputs, and serial communications. Its 32 MHz processing capability supports multiple control loops, while the event system and timers can automate deterministic switching tasks. The 16-channel ADC can monitor environmental or occupancy sensors, and the four DAC channels can support controlled analog functions where required. A low operating-voltage range of 1.6 V to 3.6 V is useful for centralized power systems, but the final supply architecture should preserve clean analog and digital rails.

🔧

Precision Analog Test Equipment

The ATXMEGA64A1U-AU can serve as the control engine in precision analog test equipment where measurement and output generation share one microcontroller. The integrated 12-bit ADC provides 16 acquisition channels, while four 12-bit DAC channels allow programmable test levels without an external converter package. Its 32 MHz clock and hardware event system can coordinate acquisition, timing, and communications. Designers should use the manufacturer’s reference and analog-layout guidance to minimize offset, noise, and supply coupling in the analog signal chain.

📡

Low-Power Embedded Gateway

The ATXMEGA64A1U-AU fits a low-power embedded gateway that must supervise sensors and forward information over local interfaces. Four DMA channels can move data among memory and peripherals, while the eight-channel event system can react to timers and peripheral events with less continuous processor activity. The 64 KB Flash stores application firmware, 4 KB SRAM handles active traffic, and 2 KB EEPROM preserves configuration data. The 1.6 V to 3.6 V range provides design flexibility for compact industrial, building-control, or instrumentation gateways.

What are the key specifications of ATXMEGA64A1U-AU that engineers should know?
The ATXMEGA64A1U-AU is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 64 KB of self-programming Flash, 4 KB SRAM, 2 KB EEPROM, and a 1.6 V to 3.6 V operating range. According to the Microchip product page, it also provides four DMA channels, an eight-channel event system, and an external bus interface. The device is offered in a 100-pin TQFP package measuring 14 mm by 14 mm.
Where can I download the ATXMEGA64A1U-AU datasheet PDF?
The official ATXMEGA64A1U-AU datasheet PDF is available from Microchip Technology at the manufacturer download link on this page. The document covers the ATxmega64A1U and ATxmega128A1U devices, including part-specific peripheral descriptions and electrical information. Use the manufacturer datasheet for package pin assignments, timing limits, memory organization, and detailed analog-converter characteristics.
Where can I find the ATXMEGA64A1U-AU pinout for the 100-pin TQFP?
The ATXMEGA64A1U-AU uses a 100-pin TQFP package, and its complete pin assignments are shown in the pin-description tables of the official Microchip datasheet. The device also appears in the XMEGA AU manual, which documents the associated peripherals in greater depth. Assign PCB tracks directly from the manufacturer pin table so that alternate functions, power pins, and ground connections match the selected ordering code.
What memory resources are available in the ATXMEGA64A1U-AU?
The ATXMEGA64A1U-AU provides 64 KB of Flash memory, a 4 KB boot-code section, 4 KB of SRAM, and 2 KB of EEPROM. According to the Microchip product page, the Flash is self-programming, allowing firmware updates without removing the microcontroller. These resources support bootloader separation, configuration storage, and moderate protocol or control-buffer workloads.
Does the ATXMEGA64A1U-AU include ADC and DAC converters?
Yes, the ATXMEGA64A1U-AU includes a 12-bit ADC with 16 channels and four 12-bit DAC channels. These converters support sensor acquisition and controlled analog-output generation inside the same device. The exact input range, sampling behavior, reference configuration, and channel multiplexing requirements must be taken from the manufacturer datasheet before analog front-end design.
What is the operating voltage range of ATXMEGA64A1U-AU?
The ATXMEGA64A1U-AU operates from 1.6 V to 3.6 V. According to the Microchip ordering information, the complete ordering code identifies a 1.6 V to 3.6 V device with 64 KB Flash, 2 KB EEPROM, and 4 KB SRAM. Designers should verify individual peripheral operating conditions and timing constraints in the manufacturer datasheet for the selected supply voltage.
What can replace the ATXMEGA64A1U-AU on an existing PCB?
The closest drop-in choices are order-code variants of the ATxmega64A1U device that retain the same 32 MHz core, 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, and TQFP-100 electrical organization. Compatibility still depends on the exact temperature, package, and reel suffix as well as firmware and errata requirements. The ATxmega64A1 non-U device and ATmega640V-8AU share a package format but are not interchangeable drop-ins for this design.
Is ATXMEGA64A1U-AU the same as ATXMEGA64A1-AU?
No. The ATXMEGA64A1U-AU and ATXMEGA64A1-AU both provide 64 KB Flash and use a 100-pin TQFP, but the U designation identifies a materially different device family member. Pin, peripheral, and firmware compatibility must therefore be checked rather than assuming that the common memory capacity and package make them interchangeable. The manufacturer migration documentation is the appropriate starting point for an A1-to-A1U conversion.
When should I choose ATXMEGA64A1U-AU over ATMEGA640V-8AU?
Choose the ATXMEGA64A1U-AU when the design requires the XMEGA feature set, including its event system, four-channel DMA controller, 12-bit ADC, and integrated DAC channels. The ATMEGA640V-8AU is an ATmega device with 64 KB Flash and a 100-pin TQFP package, but its core, peripheral arrangement, and software ecosystem differ. Package similarity alone does not make it a pin-to-pin replacement.
Is ATXMEGA64A1U-AU suitable for industrial control and data acquisition?
The ATXMEGA64A1U-AU is well suited to compact industrial-control and data-acquisition systems because it combines a 32 MHz AVR core with 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, a 16-channel 12-bit ADC, and four 12-bit DAC channels. The four-channel DMA controller and eight-channel event system can reduce CPU intervention for periodic transfers and time-sensitive peripheral events. The 1.6 V to 3.6 V supply range also supports low-voltage embedded designs.
How does ATXMEGA64A1U-AU compare with ATXMEGA64A1U-ANR?
The ATXMEGA64A1U-AU and ATXMEGA64A1U-ANR belong to the same ATxmega64A1U family and retain the same principal 32 MHz, 64 KB Flash, 4 KB SRAM, and 2 KB EEPROM organization. Their ordering codes specify different qualification, temperature, and packaging arrangements. Confirm the exact suffix, reel orientation, and temperature requirements against the manufacturer ordering information before treating them as interchangeable.
Where can I buy ATXMEGA64A1U-AU and what is the current price?
Use the Request a Quote form on this page to request the current ATXMEGA64A1U-AU price, stock position, minimum order quantity, and lead time. Commercial terms can change with quantity, package configuration, and supply status, so a quote is the reliable way to confirm an exact ordering code. The product is presented as active by Microchip Technology.
What is the lead time and stock status of ATXMEGA64A1U-AU?
Request the current stock status and lead time through the Request a Quote form on this page. The manufacturer lists the ATxmega64A1U family as active, but device-level availability can vary by exact package and reel suffix. Supply confirmation should cover the full ATXMEGA64A1U-AU ordering code and the production quantity being planned.
How does ATXMEGA64A1U-AU support power-efficient firmware operation?
The ATXMEGA64A1U-AU combines low-power operation with event-driven hardware resources. Its four-channel DMA controller can move data without continuous CPU intervention, while the eight-channel event system can connect timer, comparator, and other peripheral events. These features can reduce active processing time in sensor, communications, and control designs when firmware is structured to exploit the hardware event routing.
What development tools and programming considerations apply to ATXMEGA64A1U-AU?
The ATXMEGA64A1U-AU is supported by the Microchip AVR toolchain and the XMEGA family programming workflow described in the manufacturer documentation. Its 64 KB self-programming Flash can support bootloader-based updates, while the separate 4 KB boot-code section should be allocated deliberately. Production firmware must also account for the XMEGA AU manual, device errata, boot-lock behavior, and the selected programming mode.

के लिए इंजीनियरिंग संदर्भ डेटा ATXMEGA64A1U-AU — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ATXMEGA64A1U-AU when a design needs the XMEGA family’s event system, four-channel DMA controller, 12-bit ADC, four DAC channels, and 64 KB self-programming Flash in a 100-pin TQFP. The listed ATxmega64A1U ordering-code variants can be considered for the same PCB when their temperature, qualification, and reel requirements match. Use the ATxmega64A1 only after reviewing the manufacturer migration material because it is not the same device variant. Do not select ATMEGA640V-8AU as a drop-in replacement solely because it also uses a 100-pin TQFP and has 64 KB Flash; its core, peripheral organization, and pin functions differ. For designs needing less Flash or a smaller package, ATXMEGA32D4-AUR or ATXMEGA16E5-MUR may be more efficient, but they require a different footprint and a deliberate firmware and pinout review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATXMEGA64A1U ATXMEGA64A1U-ANR ATXMEGA64A1U-AUR ATXMEGA64A1U-CU ATXMEGA64A1U-CUR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm)
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Operating Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
Flash Memory 64 KB (32K x 16) 64 KB 64 KB 64 KB 64 KB 64 KB
Boot Code Section 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
SRAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
EEPROM 2 KB 2 KB 2 KB 2 KB 2 KB 2 KB
DMA Controller 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Event System 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels

मुख्य विशेषताएँ

  • Integrated analog conversion reduces external converter count (बनामATMEGA640V-8AU)
  • Hardware event routing supports deterministic peripheral operation (बनामATMEGA640V-8AU)
  • 64 KB self-programming Flash includes an explicit boot-code area (बनामATXMEGA64A1-AU)

डिज़ाइन नोट्स

Separate analog and digital supply paths as far as practical, place the manufacturer-recommended decoupling capacitors at the associated power pins, and route analog inputs away from high-current outputs and clock edges. The 12-bit ADC and four DAC channels make analog-reference stability important. Use the pin-description and layout guidance in the manufacturer datasheet for the exact 100-pin TQFP rather than inferring connections from another XMEGA package.

Plan the 1.6 V to 3.6 V supply range across temperature, load, and transient conditions. Confirm regulator headroom for every operating mode because the available input voltage can affect clock behavior and peripheral operation. Use a local ground reference for analog conversion and keep high-current return paths away from sensitive signal returns. Verify absolute maximum and recommended operating limits in the manufacturer datasheet before finalizing the power tree.

Do not treat the 64 KB application Flash as entirely interchangeable with a normal application partition because the device includes a separate 4 KB boot-code section. Define boot-loader protection, update mechanisms, and application boundaries early. Also account for the distinction between ATxmega64A1 and ATxmega64A1U when moving an existing design; common memory size and package shape do not guarantee identical pin functions or firmware behavior.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer material identifies the ATxmega64A1U as an active low-power AVR XMEGA microcontroller but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

atxmega64a1u cur ATXMEGA64A1U-AU datasheet ATXMEGA64A1U-AU pinout ATXMEGA64A1U-AU equivalent ATXMEGA64A1U-AU replacement ATXMEGA64A1U-AU TQFP-100 ATXMEGA64A1U 32MHz 64KB ATXMEGA64A1U-AU price ATXMEGA64A1U-AU stock Microchip ATXMEGA64A1U-AU ATXMEGA64A1U vs ATMEGA640V-8AU ATXMEGA64A1U-AU datasheet pdf

संबंधित कंपोनेंट्स और शब्द

Microchip Technology ATXMEGA64A1U-AU ATXMEGA64A1U ATXMEGA64A1U-ANR ATXMEGA64A1U-AUR ATXMEGA64A1U-CU ATXMEGA64A1U-CUR AVR XMEGA AVR RISC core 8/16-bit microcontroller embedded microcontroller self-programming Flash boot code section SRAM EEPROM direct memory access DMA controller event system 12-bit ADC 12-bit DAC external bus interface TQFP-100 surface mount industrial control data acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें