ATXMEGA64A1U-AU - 32MHz 64KB AVR MCU | Microchip
部品番号: ATXMEGA64A1U-AU ✓ 生産中ATXMEGA64A1U-AU 概要
An 8/16-bit AVR XMEGA microcontroller is an embedded-processing device that combines an AVR RISC core, programmable memories, real-time control peripherals, and serial interfaces in one integrated circuit. The XMEGA family extends the familiar AVR architecture with an event system, direct memory access, flexible timing channels, and enhanced interrupt handling, making it suitable for control-intensive systems requiring deterministic peripheral coordination.
The ATXMEGA64A1U-AU includes 64 KB of self-programming Flash, organized as 32K by 16 words, together with a 4 KB boot-code section. Its 4 KB SRAM supports working data, while 2 KB of EEPROM provides nonvolatile storage. Integrated resources include a four-channel DMA controller, an eight-channel event system, an external bus interface, and communication peripherals supporting I2C, SPI, UART, and IrDA-oriented applications.
The ATXMEGA64A1U-AU also integrates a 12-bit analog subsystem. Available descriptions identify a 16-channel, 12-bit ADC and four 12-bit DAC channels. These converters allow the controller to acquire sensor data and generate controlled analog voltage levels without requiring separate converters in every design. Its 32 MHz maximum operating frequency supports responsive protocol handling and multi-peripheral operation within a compact embedded platform.
Typical applications include industrial control modules, data-acquisition equipment, communications controllers, building automation, instrumentation, and low-power embedded products. The combination of 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, DMA, event-system hardware, and analog conversion is particularly useful when firmware must coordinate multiple sensors and communications interfaces without excessive CPU intervention.
PCB design should preserve clean analog and digital power distribution, route sensitive analog signals away from switching nodes, and follow the manufacturer’s pin and decoupling recommendations. Firmware planning should account for boot code, self-programming behavior, memory organization, and the interactions among DMA, timers, and the event system. The AU ordering code identifies the specified temperature, package, and reel configuration.
This product page consolidates the manufacturer specifications, ordering details, technical comparisons, and practical design guidance needed to evaluate the ATXMEGA64A1U-AU for a new embedded-control design.
ドロップイン代替品: ATXMEGA64A1U-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATXMEGA64A1U-AU (同一形状・フットプリント) — 相違点: Package, External Bus Interface, General-Purpose I/O, RoHS Status, Timer/Counter Count.
ATXMEGA64A1U
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA64A1U-ANR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA64A1U-AUR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA64A1U-CU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATXMEGA64A1U-CUR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA64A1U-AU 最大定格&電気的特性
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| 最大クロック周波数 | 32 MHz |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Flash Memory | 64 KB (32K x 16) |
| Self-Programming Flash | Supported |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| ADC Resolution and Channels | 12-bit, 16 channels |
| DAC Resolution and Channels | 12-bit, 4 channels |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| External Bus Interface | 1 interface |
| General-Purpose I/O | Up to 78 lines |
| Timer/Counter Count | 8 timers/counters |
| Real-Time Counter | 16-bit |
| パッケージ | 100-pin TQFP (14 mm x 14 mm) |
| 実装タイプ | Surface mount |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
ATXMEGA64A1U-AU 100-pin tqfp (14 mm x 14 mm) ピン配置ガイド
ATXMEGA64A1U-AU (100-pin tqfp (14 mm x 14 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATXMEGA64A1U-AU.
詳細は データシート をご参照ください。
主な用途
ATXMEGA64A1U-AU の用途: 6 件s: Industrial Sensor and Control Hub, Communications Controller, Data-Acquisition Instrument, Building Automation Controller, Precision Analog Test Equipment, Low-Power Embedded Gateway.
Industrial Sensor and Control Hub
The ATXMEGA64A1U-AU fits an industrial sensor hub that must acquire multiple analog inputs and respond through several digital outputs without relying on a separate converter subsystem. Its 16-channel, 12-bit ADC supports sensor conditioning, while four 12-bit DAC channels can generate control or reference voltages. The 32 MHz core provides scheduling headroom, and the four-channel DMA controller can transfer sampled data with reduced CPU involvement. The 1.6 V to 3.6 V operating range supports compact low-voltage equipment, provided that the manufacturer’s power, grounding, and analog-reference requirements are followed.
おすすめ
Communications Controller
The ATXMEGA64A1U-AU is suitable for a communications controller that must maintain multiple peripheral data paths while responding to precise timing events. Its external bus interface, four-channel DMA controller, eight-channel event system, and eight timer/counters allow data transfer and protocol timing to be divided between dedicated hardware and firmware. The 64 KB self-programming Flash supports application code and update-oriented bootloader designs, while 4 KB SRAM accommodates active protocol buffers. This architecture is particularly useful in gateways, protocol translators, and compact interface modules operating from a 1.6 V to 3.6 V supply.
おすすめ
Data-Acquisition Instrument
The ATXMEGA64A1U-AU supports a compact data-acquisition instrument requiring digital control and analog measurement in one package. The 16-channel, 12-bit ADC can collect sensor signals, while the four 12-bit DAC channels support excitation, calibration, or analog-output tests. At up to 32 MHz, the AVR core can manage acquisition sequencing and communications concurrently. The 64 KB Flash provides room for calibration tables and control firmware, and the separate 4 KB boot-code section can reserve memory for field upgrades.
おすすめ
Building Automation Controller
The ATXMEGA64A1U-AU is well matched to building-automation controllers that combine analog sensing, scheduled outputs, and serial communications. Its 32 MHz processing capability supports multiple control loops, while the event system and timers can automate deterministic switching tasks. The 16-channel ADC can monitor environmental or occupancy sensors, and the four DAC channels can support controlled analog functions where required. A low operating-voltage range of 1.6 V to 3.6 V is useful for centralized power systems, but the final supply architecture should preserve clean analog and digital rails.
おすすめ
Precision Analog Test Equipment
The ATXMEGA64A1U-AU can serve as the control engine in precision analog test equipment where measurement and output generation share one microcontroller. The integrated 12-bit ADC provides 16 acquisition channels, while four 12-bit DAC channels allow programmable test levels without an external converter package. Its 32 MHz clock and hardware event system can coordinate acquisition, timing, and communications. Designers should use the manufacturer’s reference and analog-layout guidance to minimize offset, noise, and supply coupling in the analog signal chain.
おすすめ
Low-Power Embedded Gateway
The ATXMEGA64A1U-AU fits a low-power embedded gateway that must supervise sensors and forward information over local interfaces. Four DMA channels can move data among memory and peripherals, while the eight-channel event system can react to timers and peripheral events with less continuous processor activity. The 64 KB Flash stores application firmware, 4 KB SRAM handles active traffic, and 2 KB EEPROM preserves configuration data. The 1.6 V to 3.6 V range provides design flexibility for compact industrial, building-control, or instrumentation gateways.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATXMEGA64A1U-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATXMEGA64A1U | ATXMEGA64A1U-ANR | ATXMEGA64A1U-AUR | ATXMEGA64A1U-CU | ATXMEGA64A1U-CUR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Flash Memory | 64 KB (32K x 16) | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Boot Code Section | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
主な差別化要因
- Integrated analog conversion reduces external converter count (vs ATMEGA640V-8AU)
- Hardware event routing supports deterministic peripheral operation (vs ATMEGA640V-8AU)
- 64 KB self-programming Flash includes an explicit boot-code area (vs ATXMEGA64A1-AU)
設計ノート
Separate analog and digital supply paths as far as practical, place the manufacturer-recommended decoupling capacitors at the associated power pins, and route analog inputs away from high-current outputs and clock edges. The 12-bit ADC and four DAC channels make analog-reference stability important. Use the pin-description and layout guidance in the manufacturer datasheet for the exact 100-pin TQFP rather than inferring connections from another XMEGA package.
Plan the 1.6 V to 3.6 V supply range across temperature, load, and transient conditions. Confirm regulator headroom for every operating mode because the available input voltage can affect clock behavior and peripheral operation. Use a local ground reference for analog conversion and keep high-current return paths away from sensitive signal returns. Verify absolute maximum and recommended operating limits in the manufacturer datasheet before finalizing the power tree.
Do not treat the 64 KB application Flash as entirely interchangeable with a normal application partition because the device includes a separate 4 KB boot-code section. Define boot-loader protection, update mechanisms, and application boundaries early. Also account for the distinction between ATxmega64A1 and ATxmega64A1U when moving an existing design; common memory size and package shape do not guarantee identical pin functions or firmware behavior.
コンプライアンス情報
The manufacturer material identifies the ATxmega64A1U as an active low-power AVR XMEGA microcontroller but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.