BCM8155FAIFB - 10G Multirate Transceiver | Broadcom
MPN: BCM8155FAIFB ✗ जीवन की समाप्तिBCM8155FAIFB अवलोकन
A high-speed transceiver is an interface integrated circuit that converts parallel or internally generated data into a serial optical or electrical channel and receives data from the opposite direction. In the electronic hierarchy, BCM8155FAIFB is a multirate transceiver, then a high-speed interface IC, then an interface IC and integrated circuit. Its RZ, NRZ, and Duo-binary capabilities allow the same physical design to support different line-coding requirements used in high-speed backplanes, optical-module interfaces, and long-haul transmission equipment.
The principal functional features are support for 10G serial transmission, operation at multirate line rates of 8G and 11.352G, and a 10G clock interface. RZ encoding provides a transition in every unit interval, while NRZ represents data with one transition opportunity per bit. Duo-binary encoding transfers two binary bits using three voltage levels. Broadcom also identifies enhanced long-haul transmission capability through enableable RZ modulation on the transmitter.
The transceiver combines transmit and receive functions in one interface device, reducing the number of separate high-speed interface components required around a line-card or optical subsystem. Its low-power design is important in 10G equipment because the transceiver itself must coexist with processors, memory, switching silicon, and thermal-management hardware while operating at multi-gigabit data rates. Clock availability and transmit-mode control are central to maintaining a valid high-speed serial link.
Typical uses include 10G optical-module interfaces, XFI-compatible connectivity equipment, long-haul serial links, router and switch line cards, and test equipment for multirate high-speed interfaces. The RZ mode is particularly relevant to long-haul transmission, while NRZ and Duo-binary provide additional modulation choices for links whose system-level requirements favor those encodings.
Board design should treat the 10G clock, high-speed serial differential pairs, supply rails, and device configuration pins as critical. Keep high-speed traces short and impedance controlled, place termination and coupling networks according to the manufacturer pin description, and avoid routing the clock or serial lanes through unprotected areas of the PCB. Use the manufacturer pin-description table to assign every signal and confirm the exact package footprint before layout release.
This page consolidates the identified multirate capabilities, supported encoding modes, interface standards, application guidance, and ordering information for BCM8155FAIFB. It also distinguishes documented facts from package-specific and pin-level details that must be confirmed in the Broadcom datasheet before a new board is released to production.
के लिए ड्रॉप-इन विकल्प BCM8155FAIFB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंBCM8155FAIFB Maximum Ratings और Electrical Characteristics
| Product Type | Multirate low-power 10G transceiver |
| Manufacturer | Broadcom |
| Ordering Code | BCM8155FAIFB |
| Nominal Data Rate | 10 Gbps |
| Multirate Line Rate | 8G to 11.352G |
| Supported Encoding Modes | RZ, NRZ, and Duo-binary |
| Clock Support | 10G clock |
| Transmitter Long-Haul Feature | Enableable RZ modulation |
| Power Class | Low-power |
| Interface Category | Drivers, receivers, and transceivers |
| OIF Compliance | Compliant |
| Telcordia Compliance | Compliant |
| ITU-T Compliance | Compliant |
| XFI Compliance | Compliant |
| IEEE 802.3ae Compliance | Compliant |
BCM8155FAIFB standard पिन कॉन्फ़िगरेशन गाइड
BCM8155FAIFB (standard पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BCM8155FAIFB.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
BCM8155FAIFB के लिए उपयुक्त है 6 अनुप्रयोगs: 10G Optical Module Interface, Router and Switch Line Cards, Long-Haul Serial Links, High-Speed Backplane Interfaces, XFI Connectivity Equipment, High-Speed Interface Test Equipment.
10G Optical Module Interface
BCM8155FAIFB fits the high-speed electrical interface of a 10G optical subsystem where transmit encoding, receive performance, and clock support must coexist in one transceiver. Its nominal 10 Gbps rate and 10G clock interface suit module architectures built around XFI-class links, while RZ, NRZ, and Duo-binary modes allow the system to select a coding scheme appropriate to the channel. The enableable RZ modulation provides an additional option for links operating with long-haul channel requirements. Board implementation should preserve controlled-impedance differential routing, short clock paths, and clean return paths between the transceiver and module connector. The exact power rails, termination arrangement, and decoupling requirements must follow the manufacturer application information.
Router and Switch Line Cards
BCM8155FAIFB is applicable to router, switch, and network-interface line cards that require a flexible multirate serial transceiver alongside packet-processing and switching silicon. Supporting 8G and 11.352G operation in a device described as a 10G transceiver gives designers a path to products operating at related high-speed rates. RZ, NRZ, and Duo-binary encoding can support different line-card or optical-interface architectures without changing the basic transceiver position. The 10G clock connection must be integrated carefully because clock jitter and routing discontinuities can affect a high-speed link. Use short, impedance-controlled clock and data routes, provide the specified decoupling at the device, and keep analog and digital return currents separated according to the manufacturer layout guidance.
Long-Haul Serial Links
BCM8155FAIFB suits long-haul serial-interface designs that benefit from selectable transmission coding. The Broadcom product brief specifically identifies enhanced capability for long-haul transmission through enableable RZ modulation on the transmitter, while NRZ and Duo-binary remain available for system requirements that favor those encodings. At the nominal 10 Gbps rate, the part provides the core high-speed transceiver and 10G clock functions required by the link layer. Channel validation remains essential because line length, loss, connector transitions, and jitter determine whether the complete link meets its error budget. Engineers should evaluate the specified encoding and operating conditions with the actual channel model and use manufacturer reference circuitry for impedance, termination, and power delivery.
High-Speed Backplane Interfaces
BCM8155FAIFB can be used in backplane-facing equipment that needs multirate coding and high-speed clocking in a compact interface component. The combination of 10G operation, 8G and 11.352G multirate support, and three encoding modes provides flexibility during backplane link validation and product-family standardization. Low-power operation is valuable in dense line-card designs where several transceivers may share a limited thermal and power budget. High-speed signal integrity depends on the complete channel, so use controlled-impedance layers, appropriate via transitions, and the manufacturer’s recommended pin termination. Do not add unsupported filtering or long stub branches to the serial lanes. Validate receiver performance and clock recovery across the full operating temperature range and production tolerances of the assembled system.
XFI Connectivity Equipment
BCM8155FAIFB is suitable for XFI-oriented connectivity equipment because the Broadcom product brief identifies XFI compliance along with OIF, Telcordia, ITU-T, and IEEE 802.3ae compliance. Its 10G transceiver core, selectable RZ, NRZ, and Duo-binary modes, and 10G clock interface support high-speed serial communication designs where a dedicated line-card or equipment chassis links transmit and receive channels. Compliance at the device level does not guarantee system compliance, so the complete interconnect, clock source, power delivery, and channel loss must also meet applicable XFI requirements. Follow the manufacturer pin description and recommended layout to map configuration, clock, serial-data, and supply pins correctly.
High-Speed Interface Test Equipment
BCM8155FAIFB is appropriate for test equipment that exercises multirate 10G serial links across supported modulation modes. Its 8G and 11.352G multirate capability allows a test platform to cover related operating rates, while RZ, NRZ, and Duo-binary encoding provides multiple stimulus conditions. The integrated 10G clock interface can support systems that require a dedicated high-speed clock path. In a bench instrument, thermal design and repeatable fixture connections are as important as the bare transceiver performance. Keep test-fixture launches controlled, observe the manufacturer’s supply and bypass requirements, and account for insertion loss from cables and connectors during margin calculations. Confirm each supported data-rate and encoding combination against the device documentation before releasing production test sequences.
के लिए इंजीनियरिंग संदर्भ डेटा BCM8155FAIFB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Manufacturer | Broadcom |
| Product Type | Multirate low-power 10G transceiver |
| Nominal Data Rate | 10 Gbps |
| Multirate Operation | 8G to 11.352G |
| Encoding Modes | RZ, NRZ, and Duo-binary |
| Clock Interface | 10G clock |
| Long-Haul Feature | Enableable RZ modulation |
| Interface Standards | OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae compliant |
मुख्य विशेषताएँ
- Multiple high-speed encoding options in one transceiver (बनामSingle-mode 10G transceiver)
- Multirate operation around the nominal 10G class (बनामFixed-rate 10G-only design)
- Long-haul-oriented transmitter enhancement (बनामTransceiver without enableable RZ)
डिज़ाइन नोट्स
Treat the 10G clock and high-speed serial pairs as controlled-impedance interconnects. Keep traces short, avoid unnecessary stubs and layer transitions, use the manufacturer reference layout for length matching and termination, and maintain continuous ground references. Validate the complete channel from the transceiver pins through connectors or optical-module launch points, including return loss and insertion loss at every transition.
Assign supply, ground, configuration, clock, and serial pins directly from the complete BCM8155FAIFB pin-description table. Place required bypass capacitors at the specified power pins, provide a low-impedance ground connection, and separate noisy return paths from sensitive clock and receiver references. Do not release the layout until the FAIFB suffix has been checked against the mechanical drawing.
Do not assume that every BCM8155 family ordering code is electrically and mechanically interchangeable. Verify the package, pinout, supply limits, temperature grade, supported encodings, and 10G clock configuration for the exact suffix being released. When changing suppliers, require evidence of pin-to-pin compatibility and revalidate channel margin and timing instead of relying on the family name alone.
अनुपालन जानकारी
The Broadcom product brief identifies compliance with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the complete ordering code.