Broadcom

BCM8155FAIFB - 10G Multirate Transceiver | Broadcom

MPN: BCM8155FAIFB ✗ پایان تولید
10G clock Speed
حداقل سفارش: 1 |

BCM8155FAIFB نمای کلی

Broadcom BCM8155FAIFB is a multirate, low-power 10G RZ, NRZ, and Duo-binary transceiver with a 10G clock, supplied under the Broadcom ordering code BCM8155FAIFB. It supports multirate operation identified at 8G and 11.352G, while the 10G transceiver architecture targets high-speed serial links requiring selectable line coding and recovered-clock support. The manufacturer documentation identifies compliance with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements.

A high-speed transceiver is an interface integrated circuit that converts parallel or internally generated data into a serial optical or electrical channel and receives data from the opposite direction. In the electronic hierarchy, BCM8155FAIFB is a multirate transceiver, then a high-speed interface IC, then an interface IC and integrated circuit. Its RZ, NRZ, and Duo-binary capabilities allow the same physical design to support different line-coding requirements used in high-speed backplanes, optical-module interfaces, and long-haul transmission equipment.

The principal functional features are support for 10G serial transmission, operation at multirate line rates of 8G and 11.352G, and a 10G clock interface. RZ encoding provides a transition in every unit interval, while NRZ represents data with one transition opportunity per bit. Duo-binary encoding transfers two binary bits using three voltage levels. Broadcom also identifies enhanced long-haul transmission capability through enableable RZ modulation on the transmitter.

The transceiver combines transmit and receive functions in one interface device, reducing the number of separate high-speed interface components required around a line-card or optical subsystem. Its low-power design is important in 10G equipment because the transceiver itself must coexist with processors, memory, switching silicon, and thermal-management hardware while operating at multi-gigabit data rates. Clock availability and transmit-mode control are central to maintaining a valid high-speed serial link.

Typical uses include 10G optical-module interfaces, XFI-compatible connectivity equipment, long-haul serial links, router and switch line cards, and test equipment for multirate high-speed interfaces. The RZ mode is particularly relevant to long-haul transmission, while NRZ and Duo-binary provide additional modulation choices for links whose system-level requirements favor those encodings.

Board design should treat the 10G clock, high-speed serial differential pairs, supply rails, and device configuration pins as critical. Keep high-speed traces short and impedance controlled, place termination and coupling networks according to the manufacturer pin description, and avoid routing the clock or serial lanes through unprotected areas of the PCB. Use the manufacturer pin-description table to assign every signal and confirm the exact package footprint before layout release.

This page consolidates the identified multirate capabilities, supported encoding modes, interface standards, application guidance, and ordering information for BCM8155FAIFB. It also distinguishes documented facts from package-specific and pin-level details that must be confirmed in the Broadcom datasheet before a new board is released to production.

جایگزین‌های drop-in برای BCM8155FAIFB — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

BCM8155FAIFB حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Multirate low-power 10G transceiver
Manufacturer Broadcom
Ordering Code BCM8155FAIFB
Nominal Data Rate 10 Gbps
Multirate Line Rate 8G to 11.352G
Supported Encoding Modes RZ, NRZ, and Duo-binary
Clock Support 10G clock
Transmitter Long-Haul Feature Enableable RZ modulation
Power Class Low-power
Interface Category Drivers, receivers, and transceivers
OIF Compliance Compliant
Telcordia Compliance Compliant
ITU-T Compliance Compliant
XFI Compliance Compliant
IEEE 802.3ae Compliance Compliant

راهنمای پیکربندی پین BCM8155FAIFB standard

پیکربندی پین برای BCM8155FAIFB (پکیج standard). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج standard برای BCM8155FAIFB

داده پین‌آوت تفصیلی موجود نیست برای BCM8155FAIFB.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

BCM8155FAIFB مناسب است برای 6 کاربردs: 10G Optical Module Interface, Router and Switch Line Cards, Long-Haul Serial Links, High-Speed Backplane Interfaces, XFI Connectivity Equipment, High-Speed Interface Test Equipment.

🌐

10G Optical Module Interface

BCM8155FAIFB fits the high-speed electrical interface of a 10G optical subsystem where transmit encoding, receive performance, and clock support must coexist in one transceiver. Its nominal 10 Gbps rate and 10G clock interface suit module architectures built around XFI-class links, while RZ, NRZ, and Duo-binary modes allow the system to select a coding scheme appropriate to the channel. The enableable RZ modulation provides an additional option for links operating with long-haul channel requirements. Board implementation should preserve controlled-impedance differential routing, short clock paths, and clean return paths between the transceiver and module connector. The exact power rails, termination arrangement, and decoupling requirements must follow the manufacturer application information.

🖥️

Router and Switch Line Cards

BCM8155FAIFB is applicable to router, switch, and network-interface line cards that require a flexible multirate serial transceiver alongside packet-processing and switching silicon. Supporting 8G and 11.352G operation in a device described as a 10G transceiver gives designers a path to products operating at related high-speed rates. RZ, NRZ, and Duo-binary encoding can support different line-card or optical-interface architectures without changing the basic transceiver position. The 10G clock connection must be integrated carefully because clock jitter and routing discontinuities can affect a high-speed link. Use short, impedance-controlled clock and data routes, provide the specified decoupling at the device, and keep analog and digital return currents separated according to the manufacturer layout guidance.

🌐

Long-Haul Serial Links

BCM8155FAIFB suits long-haul serial-interface designs that benefit from selectable transmission coding. The Broadcom product brief specifically identifies enhanced capability for long-haul transmission through enableable RZ modulation on the transmitter, while NRZ and Duo-binary remain available for system requirements that favor those encodings. At the nominal 10 Gbps rate, the part provides the core high-speed transceiver and 10G clock functions required by the link layer. Channel validation remains essential because line length, loss, connector transitions, and jitter determine whether the complete link meets its error budget. Engineers should evaluate the specified encoding and operating conditions with the actual channel model and use manufacturer reference circuitry for impedance, termination, and power delivery.

🖥️

High-Speed Backplane Interfaces

BCM8155FAIFB can be used in backplane-facing equipment that needs multirate coding and high-speed clocking in a compact interface component. The combination of 10G operation, 8G and 11.352G multirate support, and three encoding modes provides flexibility during backplane link validation and product-family standardization. Low-power operation is valuable in dense line-card designs where several transceivers may share a limited thermal and power budget. High-speed signal integrity depends on the complete channel, so use controlled-impedance layers, appropriate via transitions, and the manufacturer’s recommended pin termination. Do not add unsupported filtering or long stub branches to the serial lanes. Validate receiver performance and clock recovery across the full operating temperature range and production tolerances of the assembled system.

🌐

XFI Connectivity Equipment

BCM8155FAIFB is suitable for XFI-oriented connectivity equipment because the Broadcom product brief identifies XFI compliance along with OIF, Telcordia, ITU-T, and IEEE 802.3ae compliance. Its 10G transceiver core, selectable RZ, NRZ, and Duo-binary modes, and 10G clock interface support high-speed serial communication designs where a dedicated line-card or equipment chassis links transmit and receive channels. Compliance at the device level does not guarantee system compliance, so the complete interconnect, clock source, power delivery, and channel loss must also meet applicable XFI requirements. Follow the manufacturer pin description and recommended layout to map configuration, clock, serial-data, and supply pins correctly.

🔧

High-Speed Interface Test Equipment

BCM8155FAIFB is appropriate for test equipment that exercises multirate 10G serial links across supported modulation modes. Its 8G and 11.352G multirate capability allows a test platform to cover related operating rates, while RZ, NRZ, and Duo-binary encoding provides multiple stimulus conditions. The integrated 10G clock interface can support systems that require a dedicated high-speed clock path. In a bench instrument, thermal design and repeatable fixture connections are as important as the bare transceiver performance. Keep test-fixture launches controlled, observe the manufacturer’s supply and bypass requirements, and account for insertion loss from cables and connectors during margin calculations. Confirm each supported data-rate and encoding combination against the device documentation before releasing production test sequences.

What is the BCM8155FAIFB?
The BCM8155FAIFB is a Broadcom multirate, low-power 10G RZ, NRZ, and Duo-binary transceiver with a 10G clock interface. According to the Broadcom product brief, it supports multirate operation at 8G and 11.352G and provides enhanced long-haul transmission through enableable RZ modulation on the transmitter. It is intended for high-speed serial communications equipment.
What data rates does BCM8155FAIFB support?
The BCM8155FAIFB supports a nominal 10 Gbps transceiver rate and multirate operation identified at 8G and 11.352G. The Broadcom product brief describes the device as a 10G RZ, NRZ, and Duo-binary transceiver. Confirm the exact data-rate and encoding combinations against the manufacturer configuration and timing tables before finalizing a link interface.
Which encoding modes are supported by BCM8155FAIFB?
The BCM8155FAIFB supports RZ, NRZ, and Duo-binary encoding. RZ returns the line to a zero state during each bit interval, NRZ conveys one bit per symbol with one transition opportunity, and Duo-binary conveys two bits using three signal levels. According to the Broadcom product brief, RZ modulation can be enabled for enhanced long-haul transmission capability.
Where can I download the BCM8155FAIFB datasheet PDF?
The BCM8155FAIFB datasheet PDF is available through the Broadcom product-document link on this page. Use the manufacturer document for the definitive pin descriptions, package dimensions, electrical limits, configuration registers, and recommended application circuit. The visible product page also links to datasheet-search records that can help locate archived documentation for the BCM8155 family.
Where can I find the BCM8155FAIFB pinout?
Use the pin-description table in the Broadcom BCM8155 datasheet and the package drawing to locate every BCM8155FAIFB pin. The ordering suffix FAIFB must be checked against the package and temperature identifiers in the manufacturer document. Do not infer the footprint or pin numbering from the BCM8155 family name alone, because package details are defined by the complete ordering code.
What is the difference between BCM8155 and BCM8155FAIFB?
BCM8155 is the family name, while BCM8155FAIFB is the complete Broadcom ordering code. The family documentation identifies the BCM8155 as a multirate low-power 10G RZ, NRZ, and Duo-binary transceiver with a 10G clock. The suffix FAIFB identifies the exact ordered configuration, so use the full-code datasheet when confirming package, grade, and production details.
Is BCM8155FAIFB suitable for long-haul transmission?
Yes, BCM8155FAIFB supports enhanced long-haul transmission through enableable RZ modulation on the transmitter. The Broadcom product brief specifically identifies RZ modulation as the long-haul enhancement while also listing NRZ and Duo-binary operation. Channel loss, jitter, connector and optical-interface performance must still be validated for the intended link.
Is BCM8155FAIFB suitable for XFI equipment?
Yes, the Broadcom product brief identifies BCM8155FAIFB as compliant with the XFI specification. It also identifies compliance with OIF, Telcordia, ITU-T, and IEEE 802.3ae requirements. XFI use is appropriate when the complete transmitter, receiver, clock, connector, and channel implementation satisfies the applicable system-level requirements.
When should I choose BCM8155FAIFB over another 10G transceiver?
Choose BCM8155FAIFB when the design requires one device to support 10G operation, 8G and 11.352G multirate modes, RZ, NRZ, and Duo-binary coding, and a 10G clock interface. The long-haul RZ capability is also relevant when line-channel requirements favor that mode. Select another part only when its pinout, supply requirements, encoding support, and qualification fit the system better.
Is BCM8155FAIFB suitable for optical-module and network-interface designs?
Yes, BCM8155FAIFB is suitable for high-speed serial-interface stages in optical modules, routers, switches, and network line cards. Its 10G transceiver operation, 10G clock interface, and multiple line-coding modes support flexible high-speed link designs. Use the manufacturer pin and application information to implement the electrical interface around the transceiver.
What can replace BCM8155FAIFB?
BCM8155FAIFB should be replaced only by a part with the same package, pin-to-pin connections, compatible supply rails, supported encoding modes, clock interface, and applicable standards. The Broadcom BCM8155 family documents the 10G RZ, NRZ, Duo-binary, and 10G clock functions, but they do not establish that every family member is a drop-in replacement. Compare the complete ordering codes before approving a substitution.
Can BCM8155FAIFB replace BCM8155?
BCM8155FAIFB can represent the ordered BCM8155 configuration only when its package, electrical limits, temperature grade, and pin assignments match the BCM8155 being replaced. Because BCM8155 is a family designation and FAIFB is a suffix-specific ordering code, compare the complete manufacturer ordering information. Do not treat the family relationship alone as proof of drop-in compatibility.
Where can I request a quote for BCM8155FAIFB?
Use the Request a Quote form on this page to request current BCM8155FAIFB availability, lead time, and ordering information. A quotation request is the appropriate route because market pricing and stock can change independently of the product documentation. Provide the complete BCM8155FAIFB ordering code and required quantity so the request is matched to the intended configuration.
What is the price of BCM8155FAIFB?
Current BCM8155FAIFB commercial terms are best obtained through the Request a Quote form on this page. The form captures quantity and delivery requirements and returns an actionable quotation without embedding a potentially stale price in technical content. Include the full suffix FAIFB when requesting the quotation to avoid ambiguity with other BCM8155 configurations.
What is the lead time for BCM8155FAIFB?
The current BCM8155FAIFB lead time depends on order quantity, supplier inventory, and required delivery date. Submit those details through the Request a Quote form on this page for a time-specific response. The manufacturer documentation defines the device and its interfaces but does not establish a current order lead time.
Is BCM8155FAIFB in stock?
Stock status for BCM8155FAIFB should be confirmed through the Request a Quote form on this page. Provide the required quantity and target date so the response reflects current availability rather than a historical listing. The complete Broadcom ordering code BCM8155FAIFB should be included in the request.
What are the key specifications of BCM8155FAIFB that engineers should know?
The key BCM8155FAIFB specifications are its 10G transceiver rating, multirate operation at 8G and 11.352G, support for RZ, NRZ, and Duo-binary encoding, and integration of a 10G clock interface. According to the Broadcom product brief, the device is low power, supports enhanced long-haul transmission with RZ modulation, and complies with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements.

داده‌های مرجع مهندسی برای BCM8155FAIFB — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose BCM8155FAIFB when a high-speed serial design needs a nominal 10G transceiver with a 10G clock and support for RZ, NRZ, or Duo-binary encoding. It is particularly attractive when a system may use 8G or 11.352G operation, or when enableable RZ modulation is useful for a long-haul link. Confirm that the complete ordering code matches the intended package, grade, electrical limits, and pin layout before committing the PCB. Do not substitute another BCM8155 suffix solely because it has the same family name; require matching pin assignments, supplies, clock configuration, and supported modes. For a replacement, a candidate must also match the original device’s high-speed channel performance and environmental requirements. When these conditions are satisfied, BCM8155FAIFB provides a compact multifunction interface for optical modules, network line cards, connectivity equipment, and long-haul transmission equipment.

مقایسه با جایگزین‌ها

پارامتر این محصول
Manufacturer Broadcom
Product Type Multirate low-power 10G transceiver
Nominal Data Rate 10 Gbps
Multirate Operation 8G to 11.352G
Encoding Modes RZ, NRZ, and Duo-binary
Clock Interface 10G clock
Long-Haul Feature Enableable RZ modulation
Interface Standards OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae compliant

تفاوت‌های کلیدی

  • Multiple high-speed encoding options in one transceiver (در مقابلSingle-mode 10G transceiver)
  • Multirate operation around the nominal 10G class (در مقابلFixed-rate 10G-only design)
  • Long-haul-oriented transmitter enhancement (در مقابلTransceiver without enableable RZ)

یادداشت‌های طراحی

Treat the 10G clock and high-speed serial pairs as controlled-impedance interconnects. Keep traces short, avoid unnecessary stubs and layer transitions, use the manufacturer reference layout for length matching and termination, and maintain continuous ground references. Validate the complete channel from the transceiver pins through connectors or optical-module launch points, including return loss and insertion loss at every transition.

Assign supply, ground, configuration, clock, and serial pins directly from the complete BCM8155FAIFB pin-description table. Place required bypass capacitors at the specified power pins, provide a low-impedance ground connection, and separate noisy return paths from sensitive clock and receiver references. Do not release the layout until the FAIFB suffix has been checked against the mechanical drawing.

Do not assume that every BCM8155 family ordering code is electrically and mechanically interchangeable. Verify the package, pinout, supply limits, temperature grade, supported encodings, and 10G clock configuration for the exact suffix being released. When changing suppliers, require evidence of pin-to-pin compatibility and revalidate channel margin and timing instead of relying on the family name alone.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The Broadcom product brief identifies compliance with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the complete ordering code.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

BCM8155FAIFB datasheet BCM8155FAIFB pinout BCM8155FAIFB datasheet pdf BCM8155FAIFB schematic BCM8155FAIFB equivalent BCM8155FAIFB replacement BCM8155FAIFB cross reference BCM8155FAIFB footprint BCM8155FAIFB price Broadcom BCM8155FAIFB BCM8155FAIFB RZ NRZ Duo-binary BCM8155FAIFB long haul RZ

قطعات و اصطلاحات مرتبط

Broadcom BCM8155FAIFB BCM8155 multirate transceiver 10G transceiver high-speed interface IC interface integrated circuit RZ encoding NRZ encoding Duo-binary encoding 10G clock 8G line rate 11.352G line rate 10 Gbps OIF Telcordia ITU-T XFI IEEE 802.3ae long-haul transmission optical module router line card switch line card controlled-impedance routing
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ