BCM8705LBIFBG - 10GbE XAUI-to-XFI IC | Broadcom
MPN: BCM8705LBIFBG ✓ सक्रियBCM8705LBIFBG अवलोकन
An Ethernet transceiver is a semiconductor that integrates high-speed serial physical-layer functions into a communication system. Within the network hierarchy, the BCM8705LBIFBG belongs to the Ethernet interface IC category, connecting digital processing blocks to external 10-gigabit copper or optical links. Its role is not general-purpose data processing; it is specialized signal conditioning, clock recovery, and XAUI-to-XFI interface conversion for high-throughput telecommunications equipment.
The principal documented features are adaptive receive equalization, built-in phase-locked-loop functionality, clock and data recovery, and jitter cleaning. Adaptive receive equalization is particularly important when channel loss or skew varies across a high-speed connection. The clock-and-data-recovery and jitter-cleaning functions support stable transmission of high-rate serial data, while the phase-locked loop provides a timing reference for these operations.
The BCM8705LBIFBG operates in the demanding environment of 10GbE and 10GFC links, where signal integrity, reference-clock quality, and circuit-board implementation can materially affect link margin. A 256-ball BGA also requires a dense multilayer PCB with short high-speed routes, continuous reference planes, well-controlled impedance, and careful power-delivery networks. The device should be placed close to the connected PHY, network processor, or connector transition to minimize loss between the transceiver and high-speed channel.
Typical application areas include 10-gigabit Ethernet switching and routing equipment, 10GFC network interfaces, backplane and line-card signal conditioning, high-speed optical-module interfaces, and systems that use XAUI on one side and XFI/LANPHY on the other. In these designs, the BCM8705LBIFBG can centralize clock recovery and adaptive equalization while reducing the amount of external high-speed interface circuitry required.
A critical layout requirement is controlled transmission-line geometry for every XAUI and XFI connection. Use the manufacturer reference layout and impedance requirements, provide clean supply rails, minimize return-path discontinuities, and follow the ball-assignment and decoupling guidance in the manufacturer documentation. The BGA footprint also requires controlled soldermask and paste design to prevent bridging across the fine-pitch balls.
This page organizes the documented interface functions, package information, sourcing requirements, and practical PCB considerations into one engineering reference. It also distinguishes a confirmed BCM8705 family MPN from unverified substitutes, helping designers avoid assuming pin compatibility merely because another part is described as an Ethernet transceiver.
के लिए ड्रॉप-इन विकल्प BCM8705LBIFBG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं BCM8705LBIFBG (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type, Manufacturer, Package Type, Terminal Count.
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंBCM8705LBIFBG Maximum Ratings और Electrical Characteristics
| Product Type | Ethernet transceiver IC |
| डेटा दर | 10 Gb/s |
| Ethernet Protocol | 10GbE |
| Fibre Channel Protocol | 10GFC |
| Input Interface | XAUI |
| Output Interface | XFI/LANPHY |
| Clock and Data Recovery | Supported |
| Phase-Locked Loop | Built-in |
| Receive Equalization | Adaptive |
| Jitter Cleaning | Supported |
| Package Type | 256-ball BGA |
| Terminal Count | 256 terminals |
| Terminal Form | Ball |
| Package Shape | Square |
| Terminal Position | Bottom |
| माउंटिंग प्रकार | Surface mount |
BCM8705LBIFBG square पिन कॉन्फ़िगरेशन गाइड
BCM8705LBIFBG (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BCM8705LBIFBG.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
BCM8705LBIFBG के लिए उपयुक्त है 6 अनुप्रयोगs: 10GbE Switching Equipment, 10GbE Router Interfaces, 10GFC Network Interfaces, Optical Module Host Interfaces, Telecom Line Cards, High-Speed Backplane Interfaces.
10GbE Switching Equipment
The BCM8705LBIFBG fits switching platforms that require a dedicated XAUI-to-XFI/LANPHY conversion stage between a switching or packet-processing ASIC and external 10-gigabit physical links. Its documented clock and data recovery function helps reconstruct a usable serial data stream, while adaptive receive equalization compensates for channel degradation. The 256-ball BGA also permits a compact integration footprint, although it requires a fine-pitch multilayer layout. Engineers should place the device near the associated ASIC or connector transition, maintain controlled impedance on every XAUI and XFI route, and follow the manufacturer reference layout for ball assignments, reference clocks, decoupling, and return-path continuity.
अनुशंसित
10GbE Router Interfaces
The BCM8705LBIFBG can support high-speed router line-card interfaces where XAUI connects an internal forwarding engine and XFI/LANPHY connects a physical-layer or optical-interface subsystem. At 10GbE, clock quality and jitter directly affect reliable signal transfer, making the documented clock-recovery and jitter-cleaning functions central to the device's role. Adaptive receive equalization further helps the receiver tolerate loss and distortion within the implemented channel. Board planning must preserve short high-speed paths, continuous reference planes, and an uninterrupted return path, while the power network must supply the transceiver through the topology prescribed by the manufacturer documentation.
अनुशंसित
10GFC Network Interfaces
The BCM8705LBIFBG is applicable to 10GFC network-interface designs because Broadcom identifies the device for both 10GbE and 10GFC operation. It can sit between an XAUI-producing controller and an XFI/LANPHY physical interface, combining conversion, timing recovery, adaptive equalization, and jitter cleaning in one package. This integration reduces the need to distribute high-speed adaptation functions across separate components. To realize the intended performance, engineers should use the manufacturer's specified reference-clock arrangement, controlled-impedance board stack-up, proper high-speed input and output terminations, and decoupling placed directly according to the 256-ball BGA layout guidance.
अनुशंसित
Optical Module Host Interfaces
The BCM8705LBIFBG can be used on the host side of a 10-gigabit optical module when the module presents an XFI/LANPHY electrical interface and the surrounding system uses XAUI. Its XAUI-to-XFI/LANPHY conversion, clock and data recovery, adaptive receive equalization, and jitter cleaning support the electrical link between the network controller and optical subsystem. The IC does not perform optical-to-electrical or electrical-to-optical conversion itself; those functions remain in the module. Placement and routing should minimize the distance between the transceiver, clock source, and interface connector, with particular attention to impedance control, reference-plane continuity, and return-path design around every high-speed differential pair.
अनुशंसित
Telecom Line Cards
The BCM8705LBIFBG suits telecommunications line-card designs that transport 10GbE or 10GFC traffic through XAUI and XFI/LANPHY links. Its integrated clock recovery and jitter cleaning reduce the amount of discrete high-speed signal conditioning required, while adaptive receive equalization helps the receiver operate across variable channel losses. In a dense line card, the compact 256-ball BGA can simplify routing compared with several discrete interface devices, but it also imposes demanding assembly and layout requirements. Use the manufacturer ball map for all connections and allocate adequate via density beneath the BGA, maintain layer-transition return paths, and isolate noisy switching supplies from sensitive clock and receiver nodes.
अनुशंसित
High-Speed Backplane Interfaces
The BCM8705LBIFBG can be evaluated for high-speed backplane links that require adaptive receive equalization and timing recovery between an XAUI source and an XFI/LANPHY destination. These features are relevant when insertion loss, skew, or jitter threaten reliable 10-gigabit communication. Successful deployment depends on the complete channel and cannot be inferred from the transceiver alone; trace geometry, connectors, dielectric material, reference planes, clocking, and the adjacent PHY all affect the achievable link margin. Start from the manufacturer's reference design, preserve the recommended impedance and via geometry, and verify the assembled board with appropriate 10GbE signal-integrity analysis before production release.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा BCM8705LBIFBG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | Broadcom |
| Package | 256-ball BGA |
| Product Type | Ethernet transceiver IC |
| Data Rate Class | 10GbE / 10GFC |
| Input Interface | XAUI |
| Output Interface | XFI/LANPHY |
| Receive Equalization | Adaptive |
| Timing Recovery | Built-in phase-locked loop, clock and data recovery, and jitter cleaning |
| Terminal Count | 256 terminals |
मुख्य विशेषताएँ
- Integrated high-speed recovery functions (बनामGeneric 10GbE transceiver IC)
- Coverage of 10GbE and 10GFC links (बनामEthernet-only interface without 10GFC support)
- Native XAUI-to-XFI/LANPHY conversion (बनामTransceiver requiring separate conversion or retiming stages)
डिज़ाइन नोट्स
Implement the BCM8705LBIFBG in a multilayer PCB with continuous reference planes beneath the 256-ball BGA and uninterrupted return paths at every layer transition. Follow the manufacturer reference layout for ball escapes, via geometry, and high-speed differential routing. Keep XAUI and XFI traces short, use the prescribed controlled-impedance geometry, and avoid crossing plane splits beneath the device because a discontinuous return path can degrade even a correctly dimensioned trace.
Use the manufacturer-specified supply rails, decoupling values, and placement for the BCM8705LBIFBG. Place high-frequency decoupling capacitors close to the associated BGA power balls and provide adequate via connections into the relevant reference planes. Keep switching-converter loops and high-current paths away from sensitive receiver and reference-clock areas. Validate power sequencing, voltage tolerances, and ripple on the assembled board because inadequate supply return paths can appear as jitter or loss of clock-and-data-recovery margin.
Use the exact BCM8705LBIFBG ball map when assigning XAUI, XFI/LANPHY, clock, control, supply, and ground connections; do not infer a pinout from a generic 256-ball BGA library. The verified listing confirms the terminal count, ball form, square package, and bottom-side terminal arrangement, but it does not publish individual ball names. Confirm the manufacturer pin-description table before releasing schematics, PCB artwork, or a BGA assembly drawing.
Treat reference-clock quality as part of the signal-integrity design. Route clock connections according to the manufacturer topology, minimize stubs and unnecessary vias, and maintain a continuous return path. Because the BCM8705LBIFBG includes clock and data recovery plus jitter cleaning, an unstable reference or noisy clock distribution can undermine the apparent benefit of those functions. Use controlled-impedance XAUI and XFI routes and verify the complete assembly with eye-diagram, jitter, and compliance testing.
Do not substitute a generic 10GbE transceiver merely because its headline data rate matches. A drop-in device must also reproduce the 256-ball footprint, XAUI and XFI/LANPHY pin assignments, clock architecture, lane arrangement, electrical limits, and thermal requirements. Confirm the exact suffix against the Broadcom ordering table and review all manufacturer reference-design changes before approving an alternate component.
अनुपालन जानकारी
Compliance declarations were not identified in the product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with the manufacturer using the exact ordering code.