Broadcom

BCM8705LBIFBG - 10GbE XAUI-to-XFI IC | Broadcom

MPN: BCM8705LBIFBG ✓ Aktif
256-ball BGA Package Supported Speed
MOQ: 1 |

BCM8705LBIFBG Genel Bakış

The Broadcom BCM8705LBIFBG is a 10GbE and 10GFC Ethernet transceiver IC for converting XAUI signals to XFI/LANPHY signals. It is packaged as a 256-ball BGA and includes clock and data recovery, a built-in phase-locked loop, adaptive receive equalization, and jitter cleaning. These functions place the device between a high-speed Ethernet PHY or network processor and the physical interconnect, helping recover timing and compensate for signal degradation before data reaches the next link.

An Ethernet transceiver is a semiconductor that integrates high-speed serial physical-layer functions into a communication system. Within the network hierarchy, the BCM8705LBIFBG belongs to the Ethernet interface IC category, connecting digital processing blocks to external 10-gigabit copper or optical links. Its role is not general-purpose data processing; it is specialized signal conditioning, clock recovery, and XAUI-to-XFI interface conversion for high-throughput telecommunications equipment.

The principal documented features are adaptive receive equalization, built-in phase-locked-loop functionality, clock and data recovery, and jitter cleaning. Adaptive receive equalization is particularly important when channel loss or skew varies across a high-speed connection. The clock-and-data-recovery and jitter-cleaning functions support stable transmission of high-rate serial data, while the phase-locked loop provides a timing reference for these operations.

The BCM8705LBIFBG operates in the demanding environment of 10GbE and 10GFC links, where signal integrity, reference-clock quality, and circuit-board implementation can materially affect link margin. A 256-ball BGA also requires a dense multilayer PCB with short high-speed routes, continuous reference planes, well-controlled impedance, and careful power-delivery networks. The device should be placed close to the connected PHY, network processor, or connector transition to minimize loss between the transceiver and high-speed channel.

Typical application areas include 10-gigabit Ethernet switching and routing equipment, 10GFC network interfaces, backplane and line-card signal conditioning, high-speed optical-module interfaces, and systems that use XAUI on one side and XFI/LANPHY on the other. In these designs, the BCM8705LBIFBG can centralize clock recovery and adaptive equalization while reducing the amount of external high-speed interface circuitry required.

A critical layout requirement is controlled transmission-line geometry for every XAUI and XFI connection. Use the manufacturer reference layout and impedance requirements, provide clean supply rails, minimize return-path discontinuities, and follow the ball-assignment and decoupling guidance in the manufacturer documentation. The BGA footprint also requires controlled soldermask and paste design to prevent bridging across the fine-pitch balls.

This page organizes the documented interface functions, package information, sourcing requirements, and practical PCB considerations into one engineering reference. It also distinguishes a confirmed BCM8705 family MPN from unverified substitutes, helping designers avoid assuming pin compatibility merely because another part is described as an Ethernet transceiver.

Drop-in alternatifler için BCM8705LBIFBG — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller BCM8705LBIFBG (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, Manufacturer, Package Type, Terminal Count.

Broadcom
Product Type: Serial 10GbE/Fibre Channel channel transceiver
Manufacturer: Broadcom
İle Karşılaştır BCM8705LBIFBG →
Broadcom
Product Type: Dual-channel serial 10-Gigabit Ethernet transceiver
Manufacturer: Broadcom Limited
Package Type: Square ball-grid package
İle Karşılaştır BCM8705LBIFBG →

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

BCM8705LBIFBG Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Ethernet transceiver IC
Veri Hızı 10 Gb/s
Ethernet Protocol 10GbE
Fibre Channel Protocol 10GFC
Input Interface XAUI
Output Interface XFI/LANPHY
Clock and Data Recovery Supported
Phase-Locked Loop Built-in
Receive Equalization Adaptive
Jitter Cleaning Supported
Package Type 256-ball BGA
Terminal Count 256 terminals
Terminal Form Ball
Package Shape Square
Terminal Position Bottom
Montaj Türü Surface mount

BCM8705LBIFBG square Pin Yapısı Kılavuzu

BCM8705LBIFBG (square paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

square paket pin çizelgesi için BCM8705LBIFBG

Ayrıntılı pin çıkış verisi mevcut değil: BCM8705LBIFBG.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

BCM8705LBIFBG için uygundur 6 uygulamas: 10GbE Switching Equipment, 10GbE Router Interfaces, 10GFC Network Interfaces, Optical Module Host Interfaces, Telecom Line Cards, High-Speed Backplane Interfaces.

🌐

10GbE Switching Equipment

The BCM8705LBIFBG fits switching platforms that require a dedicated XAUI-to-XFI/LANPHY conversion stage between a switching or packet-processing ASIC and external 10-gigabit physical links. Its documented clock and data recovery function helps reconstruct a usable serial data stream, while adaptive receive equalization compensates for channel degradation. The 256-ball BGA also permits a compact integration footprint, although it requires a fine-pitch multilayer layout. Engineers should place the device near the associated ASIC or connector transition, maintain controlled impedance on every XAUI and XFI route, and follow the manufacturer reference layout for ball assignments, reference clocks, decoupling, and return-path continuity.

🌐

10GbE Router Interfaces

The BCM8705LBIFBG can support high-speed router line-card interfaces where XAUI connects an internal forwarding engine and XFI/LANPHY connects a physical-layer or optical-interface subsystem. At 10GbE, clock quality and jitter directly affect reliable signal transfer, making the documented clock-recovery and jitter-cleaning functions central to the device's role. Adaptive receive equalization further helps the receiver tolerate loss and distortion within the implemented channel. Board planning must preserve short high-speed paths, continuous reference planes, and an uninterrupted return path, while the power network must supply the transceiver through the topology prescribed by the manufacturer documentation.

🖥️

10GFC Network Interfaces

The BCM8705LBIFBG is applicable to 10GFC network-interface designs because Broadcom identifies the device for both 10GbE and 10GFC operation. It can sit between an XAUI-producing controller and an XFI/LANPHY physical interface, combining conversion, timing recovery, adaptive equalization, and jitter cleaning in one package. This integration reduces the need to distribute high-speed adaptation functions across separate components. To realize the intended performance, engineers should use the manufacturer's specified reference-clock arrangement, controlled-impedance board stack-up, proper high-speed input and output terminations, and decoupling placed directly according to the 256-ball BGA layout guidance.

💡

Optical Module Host Interfaces

The BCM8705LBIFBG can be used on the host side of a 10-gigabit optical module when the module presents an XFI/LANPHY electrical interface and the surrounding system uses XAUI. Its XAUI-to-XFI/LANPHY conversion, clock and data recovery, adaptive receive equalization, and jitter cleaning support the electrical link between the network controller and optical subsystem. The IC does not perform optical-to-electrical or electrical-to-optical conversion itself; those functions remain in the module. Placement and routing should minimize the distance between the transceiver, clock source, and interface connector, with particular attention to impedance control, reference-plane continuity, and return-path design around every high-speed differential pair.

🏭

Telecom Line Cards

The BCM8705LBIFBG suits telecommunications line-card designs that transport 10GbE or 10GFC traffic through XAUI and XFI/LANPHY links. Its integrated clock recovery and jitter cleaning reduce the amount of discrete high-speed signal conditioning required, while adaptive receive equalization helps the receiver operate across variable channel losses. In a dense line card, the compact 256-ball BGA can simplify routing compared with several discrete interface devices, but it also imposes demanding assembly and layout requirements. Use the manufacturer ball map for all connections and allocate adequate via density beneath the BGA, maintain layer-transition return paths, and isolate noisy switching supplies from sensitive clock and receiver nodes.

🖥️

High-Speed Backplane Interfaces

The BCM8705LBIFBG can be evaluated for high-speed backplane links that require adaptive receive equalization and timing recovery between an XAUI source and an XFI/LANPHY destination. These features are relevant when insertion loss, skew, or jitter threaten reliable 10-gigabit communication. Successful deployment depends on the complete channel and cannot be inferred from the transceiver alone; trace geometry, connectors, dielectric material, reference planes, clocking, and the adjacent PHY all affect the achievable link margin. Start from the manufacturer's reference design, preserve the recommended impedance and via geometry, and verify the assembled board with appropriate 10GbE signal-integrity analysis before production release.

Önerilen Ürünler Özeti

BCM8705LBIFBG Broadcom Kullanıldığı Yer: 10GbE Switching Equipment, 10GbE Router Interfaces, 10GFC Network Interfaces, Optical Module Host Interfaces, Telecom Line Cards, High-Speed Backplane Interfaces BCM8705LBIFB Related Broadcom-family MPN requiring compatibility verification Kullanıldığı Yer: 10GbE Switching Equipment, 10GbE Router Interfaces, 10GFC Network Interfaces, Optical Module Host Interfaces, Telecom Line Cards, High-Speed Backplane Interfaces
What is the BCM8705LBIFBG?
The BCM8705LBIFBG is a Broadcom 10GbE and 10GFC Ethernet transceiver IC that converts between XAUI and XFI/LANPHY signals. According to the manufacturer product information, it integrates clock and data recovery, a built-in phase-locked loop, adaptive receive equalization, and jitter cleaning. It is offered in a 256-ball BGA package for high-speed network-interface, switching, routing, and telecommunications equipment.
What interfaces does the BCM8705LBIFBG support?
The BCM8705LBIFBG supports a 10GbE XAUI-to-XFI/LANPHY signal path. According to Broadcom product information, XAUI is the wide parallel-style high-speed interface presented by the device, while XFI/LANPHY provides the serial interface on the opposite side. Its 256-ball BGA package exposes the high-speed, clock, control, and power connections required for this 10-gigabit transceiver function.
What signal-conditioning features are built into the BCM8705LBIFBG?
The BCM8705LBIFBG includes adaptive receive equalization, a built-in phase-locked loop, clock and data recovery, and jitter cleaning. According to Broadcom product information, adaptive equalization compensates for receive-channel loss, while the phase-locked loop supports stable high-speed timing. Clock and data recovery and jitter cleaning help maintain signal integrity across 10GbE and 10GFC links.
Where can I download the BCM8705LBIFBG datasheet PDF?
The BCM8705LBIFBG documentation is accessible through the linked Broadcom-family datasheet page on Octopart. The manufacturer-family document covers the BCM8705LBIFB naming variant, while the exact BCM8705LBIFBG ordering information appears on the linked distributor listing. Use the manufacturer datasheet for the authoritative ball map, electrical limits, reference layout, and application guidance before beginning PCB implementation.
Where can I find the BCM8705LBIFBG pinout?
The BCM8705LBIFBG uses a 256-ball BGA package, and its complete ball assignment must be taken from the manufacturer pin-description table. The public part listings identify the package as a square 256-terminal BGA with bottom-side balls. Use the exact BCM8705LBIFBG ordering code when cross-checking ball numbers, power rails, grounds, high-speed pairs, reference clocks, and control signals.
What is the best drop-in replacement for the BCM8705LBIFBG?
No confirmed drop-in replacement for the BCM8705LBIFBG can be identified from the available cross-reference results. A valid replacement must match the 256-ball BGA footprint, XAUI and XFI/LANPHY interfaces, reference-clock architecture, electrical limits, and pin assignment rather than merely matching the Ethernet data rate. Submit the target MPN through the Request a Quote form for availability and engineering-review assistance.
Can BCM8705LBIFB replace BCM8705LBIFBG?
BCM8705LBIFB is a confirmed Broadcom family MPN, but the available information does not establish that it is pin-to-pin compatible with BCM8705LBIFBG. The suffix difference may identify a package, temperature, or ordering option, so interchangeability must be confirmed against the manufacturer ball map and ordering information. Treat it as a family reference rather than an approved drop-in substitute.
What is the difference between BCM8705LBIFBG and BCM8705LBIFB?
BCM8705LBIFBG is the exact 256-ball BGA ordering code listed for this product, while BCM8705LBIFB appears as a related Broadcom-family datasheet identifier. The public excerpts do not define every suffix-dependent characteristic, so the exact differences in package marking, temperature grade, or ordering configuration cannot be stated reliably. Compare the manufacturer ordering table before making a replacement decision.
When should I choose the BCM8705LBIFBG for a 10GbE design?
Choose the BCM8705LBIFBG when a 10GbE or 10GFC system needs integrated XAUI-to-XFI/LANPHY conversion, clock and data recovery, adaptive receive equalization, and jitter cleaning in one 256-ball BGA device. It is especially relevant to switches, routers, line cards, and optical-network interfaces where separate high-speed retiming circuitry would increase design complexity. Final suitability depends on the complete clocking and signal-integrity architecture.
Is the BCM8705LBIFBG suitable for optical network interfaces?
The BCM8705LBIFBG can suit the host-side high-speed interface of a 10-gigabit optical-network design because it provides XAUI-to-XFI/LANPHY conversion and integrated signal-recovery functions. The optical module itself must provide the required optical and electrical conversion. Confirm transceiver timing, reference-clock, lane, and power requirements against the manufacturer documentation before integrating the IC.
How should the BCM8705LBIFBG be placed on a high-speed PCB?
Place the BCM8705LBIFBG close to the associated PHY, network processor, or interface transition to minimize trace loss between the device and the high-speed channel. According to the manufacturer reference-design approach, controlled-impedance routing, continuous return planes, low-noise clock distribution, and local decoupling are central to reliable operation. Follow the specified ball stack-up and layout rules rather than treating the BGA as a generic component.
What key specifications of the BCM8705LBIFBG should engineers know?
The key documented specifications are a 10GbE/10GFC data class, XAUI-to-XFI/LANPHY conversion, adaptive receive equalization, built-in phase-locked-loop functionality, clock and data recovery, and jitter cleaning. The device is offered in a square 256-ball BGA with bottom-side terminals. Supply voltage, temperature range, and detailed timing limits should be confirmed in the manufacturer datasheet.
Where can I buy BCM8705LBIFBG online?
Use the Request a Quote form on this page to request BCM8705LBIFBG availability, current lead time, and an order quotation. The public listings identify the exact Broadcom 256-ball BGA MPN, but their stock status can change without notice. Providing the required quantity, target date, and shipment destination enables a more useful sourcing response.
What is the price of BCM8705LBIFBG?
Current BCM8705LBIFBG pricing is not published in a qualifying quantity-break table, so a static unit price is not presented on this page. Use the Request a Quote form on this page for the quantity, currency, delivery, and supply requirements relevant to your order. The request can be handled as a direct sourcing inquiry for the exact 256-ball BGA ordering code.
What is the lead time and stock status for BCM8705LBIFBG?
The current lead time and stock quantity for BCM8705LBIFBG should be obtained through the Request a Quote form on this page. Public listings identify the component and its 256-ball BGA package, but a distributor page or marketplace entry does not by itself confirm current availability. State your required quantity, delivery date, and approved manufacturer or manufacturer-approved sourcing requirements in the request.
What Broadcom equivalent should I evaluate for BCM8705LBIFBG?
No cross-brand equivalent is confirmed for the BCM8705LBIFBG because the available cross-reference results do not identify a competing part with the same 256-ball BGA pinout and interface architecture. A valid equivalent must match XAUI and XFI/LANPHY functionality, lane timing, clocking, supply rails, and package-ball assignments. Request a quote on this page and provide the system requirements so sourcing support can identify an appropriate candidate.

Mühendislik referans verileri: BCM8705LBIFBG — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the BCM8705LBIFBG when a 10GbE or 10GFC design uses XAUI on one side and XFI/LANPHY on the other and needs integrated clock recovery, adaptive receive equalization, and jitter cleaning. It is particularly suitable for switches, routers, line cards, optical-interface hosts, and backplane equipment that can support a 256-ball BGA and a carefully controlled multilayer layout. Do not select it merely because another IC is also labeled a 10GbE transceiver; the ball assignment, clock architecture, supply rails, and interface timing must match. No confirmed drop-in alternative is identified, so an engineering substitution should proceed only after the manufacturer package data and operating requirements for both devices have been compared line by line.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Broadcom
Package 256-ball BGA
Product Type Ethernet transceiver IC
Data Rate Class 10GbE / 10GFC
Input Interface XAUI
Output Interface XFI/LANPHY
Receive Equalization Adaptive
Timing Recovery Built-in phase-locked loop, clock and data recovery, and jitter cleaning
Terminal Count 256 terminals

Ana Farklılayıcılar

  • Integrated high-speed recovery functions (karşılaştırma:Generic 10GbE transceiver IC)
  • Coverage of 10GbE and 10GFC links (karşılaştırma:Ethernet-only interface without 10GFC support)
  • Native XAUI-to-XFI/LANPHY conversion (karşılaştırma:Transceiver requiring separate conversion or retiming stages)

Tasarım Notları

Implement the BCM8705LBIFBG in a multilayer PCB with continuous reference planes beneath the 256-ball BGA and uninterrupted return paths at every layer transition. Follow the manufacturer reference layout for ball escapes, via geometry, and high-speed differential routing. Keep XAUI and XFI traces short, use the prescribed controlled-impedance geometry, and avoid crossing plane splits beneath the device because a discontinuous return path can degrade even a correctly dimensioned trace.

Use the manufacturer-specified supply rails, decoupling values, and placement for the BCM8705LBIFBG. Place high-frequency decoupling capacitors close to the associated BGA power balls and provide adequate via connections into the relevant reference planes. Keep switching-converter loops and high-current paths away from sensitive receiver and reference-clock areas. Validate power sequencing, voltage tolerances, and ripple on the assembled board because inadequate supply return paths can appear as jitter or loss of clock-and-data-recovery margin.

Use the exact BCM8705LBIFBG ball map when assigning XAUI, XFI/LANPHY, clock, control, supply, and ground connections; do not infer a pinout from a generic 256-ball BGA library. The verified listing confirms the terminal count, ball form, square package, and bottom-side terminal arrangement, but it does not publish individual ball names. Confirm the manufacturer pin-description table before releasing schematics, PCB artwork, or a BGA assembly drawing.

Treat reference-clock quality as part of the signal-integrity design. Route clock connections according to the manufacturer topology, minimize stubs and unnecessary vias, and maintain a continuous return path. Because the BCM8705LBIFBG includes clock and data recovery plus jitter cleaning, an unstable reference or noisy clock distribution can undermine the apparent benefit of those functions. Use controlled-impedance XAUI and XFI routes and verify the complete assembly with eye-diagram, jitter, and compliance testing.

Do not substitute a generic 10GbE transceiver merely because its headline data rate matches. A drop-in device must also reproduce the 256-ball footprint, XAUI and XFI/LANPHY pin assignments, clock architecture, lane arrangement, electrical limits, and thermal requirements. Confirm the exact suffix against the Broadcom ordering table and review all manufacturer reference-design changes before approving an alternate component.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations were not identified in the product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with the manufacturer using the exact ordering code.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

BCM8705LBIFBG datasheet BCM8705LBIFBG pinout BCM8705LBIFBG datasheet pdf BCM8705LBIFBG schematic BCM8705LBIFBG equivalent BCM8705LBIFBG replacement BCM8705LBIFBG cross reference BCM8705LBIFBG price BCM8705LBIFBG stock Broadcom BCM8705LBIFBG BCM8705LBIFBG 256-ball BGA BCM8705LBIFBG XAUI XFI

İlgili Bileşenler ve Terimler

Broadcom BCM8705LBIFBG BCM8705LBIFB Ethernet transceiver IC 10GbE 10GFC XAUI XFI LANPHY clock and data recovery phase-locked loop adaptive receive equalization jitter cleaning 256-ball BGA surface-mount package high-speed serial interface Ethernet interface IC telecommunications equipment network switching optical module backplane signal integrity controlled impedance
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle