ROHM Semiconductor

BD34700FV-E2 - 4-Channel Sound Processor | ROHM

MPN: BD34700FV-E2 ✗ जीवन की समाप्ति
6.5 V to 7.5 V Vdss SSOP-B40 Package
न्यूनतम ऑर्डर मात्रा: 1 |

BD34700FV-E2 अवलोकन

The ROHM BD34700FV-E2 is a four-channel independent volume system, or analog sound processor, with built-in micro-step volume and a 6.5 V to 7.5 V supply range. It is supplied in the SSOP-B40 package and is designed for AV receivers and simple two-channel audio systems. The device uses micro-step volume to reduce switching pop noise during volume changes, helping preserve clean sound transitions.

A sound processor such as the BD34700FV-E2 belongs to the audio signal-control hierarchy: analog audio processor -> volume-control IC -> audio special-purpose IC -> semiconductor. In a typical audio system, the processor sits between source-selection circuitry or preamplifier outputs and power-amplifier inputs. Its principal function is to provide independent attenuation and volume control for multiple audio channels while maintaining low-noise signal handling.

The four-channel architecture is useful when a system needs separate main-volume, sub-volume, surround, or zone controls. The ROHM product page identifies the BD34700FV as a four-channel independent-volume system specifically suited to subvolume control in multichannel AV receivers and main-volume control in simple two-channel systems. This makes it a practical choice when several analog audio paths require coordinated level adjustment without assigning a dedicated attenuator to each channel.

The built-in micro-step volume function is the central technical feature. Instead of changing the attenuation in large abrupt steps, the processor uses smaller volume increments, which can reduce audible switching pop noise during level transitions. In practice, the benefit depends on the surrounding signal path, control timing, and the selected attenuation step, but it can improve perceived audio quality during user-controlled volume changes.

The BD34700FV-E2 uses an SSOP-B40 package and is identified by ROHM as an audio-channel, audio-special-purpose device. The verified product information confirms its 6.5 V to 7.5 V operating supply range, four-channel volume architecture, and micro-step volume feature. Detailed electrical limits, pin assignments, recommended application circuits, control-interface timing, and package dimensions should be taken from the manufacturer datasheet when finalizing a PCB design.

Typical deployments include AV receivers, stereo amplifiers, compact audio systems, television audio paths, and other multichannel analog equipment. In an AV receiver, the device can provide independent level control for surround or subvolume channels; in a stereo product, it can provide the main volume function. The design should preserve adequate signal headroom between the processor and the downstream amplifier.

For PCB implementation, confirm the exact SSOP-B40 footprint, pin numbering, exposed thermal-pad arrangement, and decoupling requirements in the ROHM datasheet. Connect the supply pins to the specified 6.5 V to 7.5 V range, place bypass capacitors close to the supply pins, and keep analog input and output routing short to reduce added noise and crosstalk.

This product page combines the manufacturer’s product description with a practical view of channel architecture, micro-step volume behavior, package constraints, and design checks. It also distinguishes verified functions from electrical details that require direct review of the ROHM datasheet before a production release.

के लिए ड्रॉप-इन विकल्प BD34700FV-E2 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

BD34700FV

✅ ड्रॉप-इन
📦 SSOP-B40
Base ordering code versus E2 ordering code; the verified manufacturer text does not quantify the suffix difference.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

BD34700FV-E2 Maximum Ratings और Electrical Characteristics

Product Type 4-channel analog sound processor
Number of Audio Channels 4 channels
Volume Architecture Independent volume control for 4 channels
Micro-Step Volume Built-in micro-step volume function
Supply Voltage Range 6.5 V to 7.5 V
पैकेज SSOP-B40
माउंटिंग प्रकार Surface Mount
Primary Application AV receiver and two-channel audio systems
Switching Pop Noise Reduction Micro-step volume reduces audible transitions during volume changes

BD34700FV-E2 ssop-b40 पिन कॉन्फ़िगरेशन गाइड

BD34700FV-E2 (ssop-b40 पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

BD34700FV-E2 के लिए ssop-b40 पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BD34700FV-E2.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

BD34700FV-E2 के लिए उपयुक्त है 6 अनुप्रयोगs: AV Receiver Subvolume Control, Two-Channel Stereo Main Volume, Television Audio Attenuation, Multichannel Zone Audio Control, Compact Stereo Amplifier, Professional Audio Monitoring Path.

🎧

AV Receiver Subvolume Control

The BD34700FV-E2 fits multichannel AV receivers that need independent attenuation for surround or subvolume paths. Its four-channel volume system allows separate control of multiple analog audio branches, while the built-in micro-step function is intended to reduce switching pop noise when levels change. Place the device between the receiver’s analog signal-processing stage and the relevant power-amplifier inputs, provided each channel remains within the datasheet’s signal and attenuation limits. The 6.5 V to 7.5 V supply requirement should be derived from the receiver’s existing analog rail architecture or generated locally.

🎧

Two-Channel Stereo Main Volume

The BD34700FV-E2 can serve as the main-volume element in a simple stereo system because it provides four independent volume channels and is identified by ROHM for main-volume use in two-channel equipment. A design can use the appropriate channels for left and right attenuation while preserving the remaining channels for other controllable paths. Micro-step volume can make user-level changes less abrupt than a conventional coarse attenuator. Confirm the control method, attenuation range, signal reference, and recommended input/output network in the manufacturer datasheet before finalizing the stereo routing.

📺

Television Audio Attenuation

A television or display product can use the BD34700FV-E2 where separate analog audio paths require controlled attenuation before reaching an amplifier or speaker driver. The four-channel architecture provides more flexibility than a single attenuator, and micro-step volume can reduce audible switching transitions during menu-driven level changes. The implementation should account for the television’s available 6.5 V to 7.5 V analog supply, maintain short signal paths, and observe the manufacturer’s grounding and bypass recommendations. Verify attenuation linearity and channel behavior against the production audio architecture.

🏠

Multichannel Zone Audio Control

The four independent BD34700FV-E2 volume channels suit compact home-audio and secondary-zone products that must control several analog outputs separately. Instead of duplicating discrete attenuator networks, the processor centralizes four level-control paths in one SSOP-B40 device. Micro-step adjustment can make changes between source, zone, and muted operating states less abrupt, although the resulting audible benefit depends on system timing and downstream amplification. Validate gain distribution and attenuation range for every zone, and ensure the supply remains within 6.5 V to 7.5 V under all operating states.

🔊

Compact Stereo Amplifier

The BD34700FV-E2 can serve as a centralized volume-control element in a compact stereo amplifier, particularly when user interface changes are expected to cause distracting clicks or pops. Its four-channel architecture supports a main stereo pair and additional controlled paths, while micro-step operation reduces the abruptness of attenuation changes. Position the processor upstream of the power amplifier and preserve adequate signal level for the selected gain structure. Confirm the attenuation law, control timing, supply decoupling, and analog path recommendations in the ROHM datasheet before releasing the PCB.

🎚️

Professional Audio Monitoring Path

Professional monitoring and mixing equipment can use the BD34700FV-E2 where multiple analog monitoring paths require independent level adjustment. The four-channel architecture makes it possible to balance left, right, and additional monitoring outputs, while micro-step control can reduce abrupt switching artifacts during operator adjustments. The processor must operate within its specified attenuation, frequency-response, and signal-level limits, and the downstream headphone or power amplifier must still provide adequate drive. Validate channel isolation, gain distribution, and grounding in the completed system rather than relying on nominal volume resolution alone.

What is the BD34700FV-E2 used for?
The BD34700FV-E2 is a four-channel analog sound processor with independent volume control and built-in micro-step volume. According to the ROHM product page, it is intended for subvolume control in multichannel AV receivers and main-volume control in simple two-channel systems. Its micro-step approach reduces switching pop noise when the user changes volume, while the four-channel architecture supports separate attenuation paths in the surrounding analog audio system.
What are the key specifications of BD34700FV-E2?
The key BD34700FV-E2 specifications are four independent audio channels, a 6.5 V to 7.5 V supply range, a built-in micro-step volume function, and an SSOP-B40 package. The manufacturer describes the device as a four-channel sound processor intended for AV receivers and simple stereo systems. Exact attenuation range, control timing, frequency response, distortion, and pin assignments must be confirmed in the ROHM BD34700FV datasheet before layout and firmware decisions are finalized.
How does micro-step volume reduce pop noise in BD34700FV-E2?
The BD34700FV-E2 uses micro-step volume to change attenuation through smaller increments than a conventional stepped volume control. The ROHM product page states that this can reduce switching pop noise during volume changes. The benefit is most relevant when a system changes level during playback, because gradual attenuation changes can prevent the abrupt signal transition associated with audible clicks. The final sound improvement also depends on the source impedance, downstream amplifier, and board layout.
What is the supply voltage of BD34700FV-E2?
The BD34700FV-E2 operates from 6.5 V to 7.5 V, according to the Mouser listing for the exact ROHM MPN. Designers should use this range as the primary supply design constraint and confirm operating limits, absolute maximum ratings, and decoupling recommendations in the manufacturer datasheet. The supply rails should be kept within the specified range during startup, shutdown, fault conditions, and normal audio-channel operation.
Is BD34700FV-E2 suitable for AV receiver subvolume control?
Yes, the BD34700FV-E2 is specifically described by ROHM as suitable for multichannel AV receiver subvolume control. Its four independent volume channels can support separate attenuation of analog audio paths, while micro-step operation helps reduce switching pop noise during adjustments. In a practical receiver, the processor can be placed between source or preamplifier outputs and the corresponding amplifier or mixing stage, subject to signal-level and timing checks in the datasheet.
Can BD34700FV-E2 be used as the main volume control in a stereo amplifier?
Yes. The ROHM product page identifies simple two-channel systems and main-volume control as suitable use cases for the BD34700FV. In a stereo design, two of the four channels can serve the left and right volume paths when the control method and pin configuration support that arrangement. Confirm channel allocation, attenuation behavior, and control electrical requirements in the BD34700FV datasheet before finalizing the board connection.
Where can I download the BD34700FV-E2 datasheet PDF?
The BD34700FV-E2 datasheet can be downloaded from the ROHM product page or the linked manufacturer PDF hosted by Mouser. The document is titled BD34700FV and covers the four-channel sound processor used by the E2 ordering code. Use the ROHM datasheet for authoritative pin names, package dimensions, electrical characteristics, control timing, and typical application information. The linked PDF is: https://www.mouser.com/datasheet/2/348/bd34700fv_e-1873627.pdf
Where can I find the BD34700FV-E2 pinout?
The BD34700FV-E2 pinout is in the manufacturer BD34700FV datasheet and product documentation. The exact ordering code uses the SSOP-B40 package, but the verified listing does not expose individual pin names in its text. Use the pin-description table and package drawing in the ROHM datasheet when assigning PCB nets, especially for control signals, analog inputs and outputs, supply connections, and ground. Do not infer pin functions from the distributor category label.
What is the best drop-in replacement for BD34700FV-E2?
No independently verified drop-in replacement for the BD34700FV-E2 is identified in the available cross-reference results. A valid replacement must use the same SSOP-B40 footprint, preserve the four-channel volume architecture, support the 6.5 V to 7.5 V supply range, and provide compatible control and signal pin functions. The unsuffixed BD34700FV is the closest same-family ordering variant, but its exact suffix, lead-free status, and production ordering relationship should be confirmed with ROHM before substitution.
What can replace BD34700FV-E2?
The BD34700FV base device is the only closely identified same-family candidate, but a substitute should not be approved from the part name alone. The candidate must match the SSOP-B40 footprint, four independent channels, 6.5 V to 7.5 V supply, micro-step behavior, control interface, and analog signal levels. No cross-brand equivalent with verified pin-to-pin compatibility was identified, so the safest engineering path is to use the base ROHM device after confirming its ordering-code and footprint details.
BD34700FV-E2 versus BD34700FV: can the base part replace the E2 version?
The BD34700FV and BD34700FV-E2 appear closely related because the manufacturer lists the product family under BD34700FV while distributors identify BD34700FV-E2 as the orderable variant. The exact meaning of the E2 suffix is not stated in the verified product-page text, so unconditional replacement is not justified. Confirm the suffix definition, pin compatibility, package suffix, temperature range, lifecycle status, and ordering details in ROHM documentation before treating the base part as a drop-in replacement.
When should I choose BD34700FV-E2 over a conventional analog volume control?
Choose the BD34700FV-E2 when the design requires four independent analog volume channels and wants to reduce audible level-change artifacts. The manufacturer identifies micro-step operation as a way to reduce switching pop noise, making the device most relevant in AV receivers, stereo systems, and similar audio paths. A conventional attenuator network may be simpler for a single channel, but it does not provide the same integrated four-channel control or micro-step volume behavior.
Is BD34700FV-E2 suitable for audio amplifier and television equipment?
The BD34700FV-E2 is suitable for analog audio equipment that needs independent channel attenuation, including AV receivers and simple stereo systems, as identified by ROHM. Television and amplifier designs may also use it where a separate main-volume or zone-level stage is required. Suitability depends on signal amplitude, source impedance, required attenuation range, control method, and the available 6.5 V to 7.5 V supply; verify these details in the manufacturer datasheet.
How should the BD34700FV-E2 be decoupled and laid out?
Place the required supply bypass capacitors as close as practical to the device’s supply and ground pins, and keep analog input and output traces short to minimize added noise and coupling. The exact capacitance, permitted ESR, exposed-pad connection, and ground-plane arrangement should follow the ROHM application guidance and package drawing. Because the BD34700FV-E2 handles four audio channels, preserve symmetrical routing where possible and keep switching or digital control traces away from sensitive audio nets.
What is the lifecycle status of BD34700FV-E2?
The current lifecycle status of BD34700FV-E2 has not been explicitly stated in the verified product information. The manufacturer product page, the exact-MPN distributor listings, and the cross-reference results do not identify the device as active, obsolete, NRND, or last-time-buy. Confirm current production status, lead time, minimum order quantity, and supported ordering suffixes directly with ROHM or through the Request a Quote form before committing a production quantity.

के लिए इंजीनियरिंग संदर्भ डेटा BD34700FV-E2 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the BD34700FV-E2 when an analog audio product needs four independently controlled channels, a 6.5 V to 7.5 V supply rail, and micro-step volume intended to reduce audible switching pop noise. It is especially relevant to AV receiver subvolume paths and simple stereo main-volume control. The identified BD34700FV base part is a same-family candidate, but the E2 suffix requires confirmation before it is treated as an unqualified drop-in replacement. No verified cross-brand substitute has been identified, so engineers should not select an alternative based only on package count or audio-category similarity. For new designs, verify attenuation range, control timing, signal levels, frequency response, distortion, package drawing, and lifecycle status in the ROHM datasheet. For existing boards, compare every pin function and confirm that the candidate supports the same SSOP-B40 footprint and analog operating range.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद BD34700FV
Package SSOP-B40 SSOP-B40
Brand ROHM Semiconductor ROHM Semiconductor
Product Type 4-channel analog sound processor 4-channel analog sound processor
Number of Audio Channels 4 channels 4 channels
Micro-Step Volume Built in Built in
Independent Volume System 4 independent channels 4 independent channels
Target Applications AV receiver subvolume and simple two-channel main volume AV receiver subvolume and simple two-channel main volume
Pop-Noise Reduction Micro-step volume reduces switching pop noise during level changes Micro-step volume reduces switching pop noise during level changes
Ordering Suffix E2 Base ordering code; suffix difference requires confirmation

मुख्य विशेषताएँ

  • Four-channel independent volume architecture (बनामBD34700FV)
  • Built-in micro-step volume (बनामBD34700FV)
  • Single-package multichannel level control (बनामBD34700FV)

डिज़ाइन नोट्स

Place the required bypass capacitor directly beside the BD34700FV-E2 supply and ground pins, using the shortest practical return path. Keep the four analog input and output routes short and separated to minimize added capacitance and crosstalk. The verified product information does not specify the pin table or recommended capacitor values, so use the ROHM datasheet and reference layout as the authority before component placement and copper routing are released.

Treat all four channels as precision analog paths: use a continuous ground plane, avoid routing beneath noisy switching nodes, and maintain symmetrical geometry where channel matching matters. If micro-step volume changes are controlled by a host processor or remote-control signal, keep control traces away from the audio nets and use an appropriate return path. Confirm source and load impedances from the datasheet because excessive loading can change attenuation accuracy and channel isolation.

Do not approve a replacement solely because it is categorized as an audio amplifier or volume IC. A true drop-in candidate must match the SSOP-B40 footprint, four-channel architecture, 6.5 V to 7.5 V supply range, control method, attenuation range, and pin functions. Also avoid operating outside the stated supply range during startup or shutdown. Confirm the exact E2 suffix, lifecycle status, and ordering quantity with ROHM before authorizing a production substitution.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified product information does not state the requested environmental or material-compliance statuses.

डेटा सत्यापन तिथि: 2026-11-11 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

BD34700FV-E2 datasheet BD34700FV-E2 pinout BD34700FV-E2 SSOP-B40 BD34700FV-E2 micro-step volume BD34700FV-E2 4 channel volume ROHM BD34700FV-E2 BD34700FV-E2 datasheet pdf BD34700FV-E2 AV receiver BD34700FV-E2 equivalent BD34700FV-E2 replacement BD34700FV-E2 vs BD34700FV BD34700FV-E2 price BD34700FV-E2 stock BD34700FV-E2 application circuit

संबंधित कंपोनेंट्स और शब्द

ROHM Semiconductor BD34700FV-E2 BD34700FV four-channel sound processor analog sound processor audio special-purpose IC audio processor independent volume control micro-step volume switching pop noise attenuator AV receiver two-channel audio system 6.5 V to 7.5 V supply SSOP-B40 surface-mount package analog audio signal ROHM Semiconductor
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें