BD34700FV-E2 - 4-Channel Sound Processor | ROHM
部品番号: BD34700FV-E2 ✗ 生産終了BD34700FV-E2 概要
A sound processor such as the BD34700FV-E2 belongs to the audio signal-control hierarchy: analog audio processor -> volume-control IC -> audio special-purpose IC -> semiconductor. In a typical audio system, the processor sits between source-selection circuitry or preamplifier outputs and power-amplifier inputs. Its principal function is to provide independent attenuation and volume control for multiple audio channels while maintaining low-noise signal handling.
The four-channel architecture is useful when a system needs separate main-volume, sub-volume, surround, or zone controls. The ROHM product page identifies the BD34700FV as a four-channel independent-volume system specifically suited to subvolume control in multichannel AV receivers and main-volume control in simple two-channel systems. This makes it a practical choice when several analog audio paths require coordinated level adjustment without assigning a dedicated attenuator to each channel.
The built-in micro-step volume function is the central technical feature. Instead of changing the attenuation in large abrupt steps, the processor uses smaller volume increments, which can reduce audible switching pop noise during level transitions. In practice, the benefit depends on the surrounding signal path, control timing, and the selected attenuation step, but it can improve perceived audio quality during user-controlled volume changes.
The BD34700FV-E2 uses an SSOP-B40 package and is identified by ROHM as an audio-channel, audio-special-purpose device. The verified product information confirms its 6.5 V to 7.5 V operating supply range, four-channel volume architecture, and micro-step volume feature. Detailed electrical limits, pin assignments, recommended application circuits, control-interface timing, and package dimensions should be taken from the manufacturer datasheet when finalizing a PCB design.
Typical deployments include AV receivers, stereo amplifiers, compact audio systems, television audio paths, and other multichannel analog equipment. In an AV receiver, the device can provide independent level control for surround or subvolume channels; in a stereo product, it can provide the main volume function. The design should preserve adequate signal headroom between the processor and the downstream amplifier.
For PCB implementation, confirm the exact SSOP-B40 footprint, pin numbering, exposed thermal-pad arrangement, and decoupling requirements in the ROHM datasheet. Connect the supply pins to the specified 6.5 V to 7.5 V range, place bypass capacitors close to the supply pins, and keep analog input and output routing short to reduce added noise and crosstalk.
This product page combines the manufacturer’s product description with a practical view of channel architecture, micro-step volume behavior, package constraints, and design checks. It also distinguishes verified functions from electrical details that require direct review of the ROHM datasheet before a production release.
ドロップイン代替品: BD34700FV-E2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
BD34700FV
✅ ドロップイン📋 参考代替品(カタログ未掲載)
BD34700FV-E2 最大定格&電気的特性
| Product Type | 4-channel analog sound processor |
| Number of Audio Channels | 4 channels |
| Volume Architecture | Independent volume control for 4 channels |
| Micro-Step Volume | Built-in micro-step volume function |
| Supply Voltage Range | 6.5 V to 7.5 V |
| パッケージ | SSOP-B40 |
| 実装タイプ | Surface Mount |
| Primary Application | AV receiver and two-channel audio systems |
| Switching Pop Noise Reduction | Micro-step volume reduces audible transitions during volume changes |
BD34700FV-E2 ssop-b40 ピン配置ガイド
BD34700FV-E2 (ssop-b40 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: BD34700FV-E2.
詳細は データシート をご参照ください。
主な用途
BD34700FV-E2 の用途: 6 件s: AV Receiver Subvolume Control, Two-Channel Stereo Main Volume, Television Audio Attenuation, Multichannel Zone Audio Control, Compact Stereo Amplifier, Professional Audio Monitoring Path.
AV Receiver Subvolume Control
The BD34700FV-E2 fits multichannel AV receivers that need independent attenuation for surround or subvolume paths. Its four-channel volume system allows separate control of multiple analog audio branches, while the built-in micro-step function is intended to reduce switching pop noise when levels change. Place the device between the receiver’s analog signal-processing stage and the relevant power-amplifier inputs, provided each channel remains within the datasheet’s signal and attenuation limits. The 6.5 V to 7.5 V supply requirement should be derived from the receiver’s existing analog rail architecture or generated locally.
おすすめ
Two-Channel Stereo Main Volume
The BD34700FV-E2 can serve as the main-volume element in a simple stereo system because it provides four independent volume channels and is identified by ROHM for main-volume use in two-channel equipment. A design can use the appropriate channels for left and right attenuation while preserving the remaining channels for other controllable paths. Micro-step volume can make user-level changes less abrupt than a conventional coarse attenuator. Confirm the control method, attenuation range, signal reference, and recommended input/output network in the manufacturer datasheet before finalizing the stereo routing.
おすすめ
Television Audio Attenuation
A television or display product can use the BD34700FV-E2 where separate analog audio paths require controlled attenuation before reaching an amplifier or speaker driver. The four-channel architecture provides more flexibility than a single attenuator, and micro-step volume can reduce audible switching transitions during menu-driven level changes. The implementation should account for the television’s available 6.5 V to 7.5 V analog supply, maintain short signal paths, and observe the manufacturer’s grounding and bypass recommendations. Verify attenuation linearity and channel behavior against the production audio architecture.
おすすめ
Multichannel Zone Audio Control
The four independent BD34700FV-E2 volume channels suit compact home-audio and secondary-zone products that must control several analog outputs separately. Instead of duplicating discrete attenuator networks, the processor centralizes four level-control paths in one SSOP-B40 device. Micro-step adjustment can make changes between source, zone, and muted operating states less abrupt, although the resulting audible benefit depends on system timing and downstream amplification. Validate gain distribution and attenuation range for every zone, and ensure the supply remains within 6.5 V to 7.5 V under all operating states.
おすすめ
Compact Stereo Amplifier
The BD34700FV-E2 can serve as a centralized volume-control element in a compact stereo amplifier, particularly when user interface changes are expected to cause distracting clicks or pops. Its four-channel architecture supports a main stereo pair and additional controlled paths, while micro-step operation reduces the abruptness of attenuation changes. Position the processor upstream of the power amplifier and preserve adequate signal level for the selected gain structure. Confirm the attenuation law, control timing, supply decoupling, and analog path recommendations in the ROHM datasheet before releasing the PCB.
おすすめ
Professional Audio Monitoring Path
Professional monitoring and mixing equipment can use the BD34700FV-E2 where multiple analog monitoring paths require independent level adjustment. The four-channel architecture makes it possible to balance left, right, and additional monitoring outputs, while micro-step control can reduce abrupt switching artifacts during operator adjustments. The processor must operate within its specified attenuation, frequency-response, and signal-level limits, and the downstream headphone or power amplifier must still provide adequate drive. Validate channel isolation, gain distribution, and grounding in the completed system rather than relying on nominal volume resolution alone.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: BD34700FV-E2 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | BD34700FV |
|---|---|---|
| Package | SSOP-B40 | SSOP-B40 |
| Brand | ROHM Semiconductor | ROHM Semiconductor |
| Product Type | 4-channel analog sound processor | 4-channel analog sound processor |
| Number of Audio Channels | 4 channels | 4 channels |
| Micro-Step Volume | Built in | Built in |
| Independent Volume System | 4 independent channels | 4 independent channels |
| Target Applications | AV receiver subvolume and simple two-channel main volume | AV receiver subvolume and simple two-channel main volume |
| Pop-Noise Reduction | Micro-step volume reduces switching pop noise during level changes | Micro-step volume reduces switching pop noise during level changes |
| Ordering Suffix | E2 | Base ordering code; suffix difference requires confirmation |
主な差別化要因
- Four-channel independent volume architecture (vs BD34700FV)
- Built-in micro-step volume (vs BD34700FV)
- Single-package multichannel level control (vs BD34700FV)
設計ノート
Place the required bypass capacitor directly beside the BD34700FV-E2 supply and ground pins, using the shortest practical return path. Keep the four analog input and output routes short and separated to minimize added capacitance and crosstalk. The verified product information does not specify the pin table or recommended capacitor values, so use the ROHM datasheet and reference layout as the authority before component placement and copper routing are released.
Treat all four channels as precision analog paths: use a continuous ground plane, avoid routing beneath noisy switching nodes, and maintain symmetrical geometry where channel matching matters. If micro-step volume changes are controlled by a host processor or remote-control signal, keep control traces away from the audio nets and use an appropriate return path. Confirm source and load impedances from the datasheet because excessive loading can change attenuation accuracy and channel isolation.
Do not approve a replacement solely because it is categorized as an audio amplifier or volume IC. A true drop-in candidate must match the SSOP-B40 footprint, four-channel architecture, 6.5 V to 7.5 V supply range, control method, attenuation range, and pin functions. Also avoid operating outside the stated supply range during startup or shutdown. Confirm the exact E2 suffix, lifecycle status, and ordering quantity with ROHM before authorizing a production substitution.
コンプライアンス情報
The verified product information does not state the requested environmental or material-compliance statuses.