Silicon Labs

C8051F044-GQ - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs

MPN: C8051F044-GQ ✓ सक्रिय
3 V Vdss 100-pin TQFP, 14 x 14 mm Package 25 MHz Speed 64 KB in-system programmable Flash Memory
न्यूनतम ऑर्डर मात्रा: 1 |

C8051F044-GQ अवलोकन

The Silicon Labs C8051F044-GQ is a 25 MHz, 8-bit mixed-signal microcontroller with 64 KB of in-system programmable Flash, 4.25 KB of RAM, and a 100-pin TQFP package. It combines an 8051-compatible CIP-51 core with CAN connectivity, two analog-to-digital converter subsystems, and extensive mixed-signal peripherals for industrial control, communications, and embedded measurement systems.

An 8-bit microcontroller is a compact embedded processing device designed to execute control logic, acquire sensor data, manage communication interfaces, and supervise external hardware. The C8051F04x family combines the familiar 8051 instruction set with modern in-system programming, mixed-signal integration, and dedicated communication peripherals. Within the embedded-control hierarchy, the device sits between general-purpose processors and specialized fixed-function controllers.

Key specifications include a 25 MHz clock, 64 KB Flash program memory, 4,352 bytes of RAM, and a 3 V supply. The analog subsystem includes two high-speed ADC subsystems offering 10-bit or 12-bit operation up to 100 kSPS, as well as an 8-bit conversion mode up to 500 kSPS. Supported interfaces include CAN, SMBus, SPI, UART/USART, and EBI/EMI, while integrated features include brown-out detection, power-on reset, PWM, and a temperature sensor.

The mixed-signal architecture is important for compact control designs because sensor acquisition, communication, and control execution share one package and one clock domain. This reduces external circuitry when a design requires several analog channels alongside CAN or serial networking. The CIP-51 core provides 8051-compatible software compatibility while supporting high-speed, pipelined execution and in-system programming.

Typical applications include industrial monitoring equipment, CAN-connected sensors, process-control panels, environmental measurement systems, communications equipment, and compact embedded controllers. The 100-pin TQFP provides enough pins for mixed-signal interfaces, parallel I/O, external memory, and multiple communication functions while remaining compatible with conventional surface-mount assembly methods.

Designers should verify the exact analog-channel configuration, pin multiplexing, oscillator requirements, programming interface, and external component requirements against the manufacturer datasheet. The TQFP footprint also requires careful escape routing for its fine-pitch leads, while the mixed-signal section needs deliberate grounding and decoupling to preserve converter performance.

This page consolidates the principal C8051F044-GQ specifications, verified sourcing data, family drop-in options, and practical design considerations into an engineer-focused reference for MCU selection, PCB implementation, and replacement planning.

के लिए ड्रॉप-इन विकल्प C8051F044-GQ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं C8051F044-GQ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न ADC Maximum Sampling Rate, ADC Subsystems, Package.

Silicon Labs
ADC Maximum Sampling Rate: 500 kSPS at 8-bit resolution
ADC Subsystems: 2 separate high-speed ADC subsystems
Package: 64-pin TQFP, 10 mm x 10 mm
इसके साथ तुलना करें C8051F044-GQ →

C8051F043-GQ

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-pin TQFP (14 x 14 mm)
Same 25 MHz core and 64 KB Flash class; ADC and mixed-signal peripheral configuration differs, requiring pin and register verification

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

C8051F046-GQ

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-pin TQFP (14 x 14 mm)
Same 25 MHz, 64 KB Flash, and 100-pin TQFP class; peripheral and analog-channel differences remain

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

C8051F047-GQ

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Silicon Labs
📦 100-pin TQFP (14 x 14 mm)
8-bit mixed-signal microcontroller · 25 MHz · 8051-compatible CIP-51 pipelined core · 32 KB (32K x 8), in-system programmable · 4352 bytes (4096 + 256 bytes) · 10-bit or 12-bit at 100 kSPS; 8-bit at 500 kSPS · 2 separate high-speed ADC subsystems · 10 channels

कीमत के लिए संपर्क करें

डेटाशीट देखें →

C8051F048-GQ

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-pin TQFP (14 x 14 mm)
Same 25 MHz, 64 KB Flash, and 100-pin TQFP class; analog and communication resources require comparison

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

C8051F049-GQ

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-pin TQFP (14 x 14 mm)
Same 25 MHz core, 64 KB Flash, and 100-pin package class; exact peripheral allocation differs

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

C8051F044-GQ Maximum Ratings और Electrical Characteristics

Microcontroller Type 8-bit mixed-signal MCU
Processor Core 8051-compatible CIP-51 core
अधिकतम क्लॉक फ़्रीक्वेंसी 25 MHz
Program Memory 64 KB in-system programmable Flash
Program Memory Organization 64K x 8 bits
RAM 4.25 KB
RAM Organization 4352 bytes, 4096 + 256 bytes
सप्लाई वोल्टेज 3 V
ADC Resolution 10-bit or 12-bit
ADC Maximum Sampling Rate 100 kSPS at 10-bit or 12-bit; 500 kSPS at 8-bit
ADC Subsystems 2 independent high-speed subsystems
CAN Interface 1 CAN interface
Serial Interfaces SPI, UART/USART, and SMBus
External Bus Interface EBI/EMI
पैकेज 100-pin TQFP, 14 x 14 mm
माउंटिंग प्रकार Surface Mount
ऑपरेटिंग तापमान -40 °C to +85 °C
Integrated Features Brown-out detection/reset, power-on reset, PWM, and temperature sensor

C8051F044-GQ 100-pin tqfp, 14 x 14 mm पिन कॉन्फ़िगरेशन गाइड

C8051F044-GQ (100-pin tqfp, 14 x 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

C8051F044-GQ के लिए 100-pin tqfp, 14 x 14 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: C8051F044-GQ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

C8051F044-GQ के लिए उपयुक्त है 6 अनुप्रयोगs: CAN-Connected Industrial Control, Environmental Monitoring, Process-Control Panels, Communications Equipment, Automotive-Style Sensor Node, Precision Data-Acquisition Module.

🏭

CAN-Connected Industrial Control

The C8051F044-GQ fits compact CAN-connected industrial controllers because it combines a 25 MHz 8051-compatible CIP-51 core, 64 KB of programmable Flash, and an integrated CAN interface in one 100-pin TQFP package. Its 4.25 KB of RAM supports control state, protocol buffers, and supervisory tasks without requiring an external memory device. Two high-speed ADC subsystems can acquire process or sensor signals at up to 100 kSPS in 10-bit or 12-bit mode, while PWM supports actuator timing. The trade-off is that each analog and communication resource still requires careful pin assignment, grounding, and firmware validation before field deployment.

🧩

Environmental Monitoring

The C8051F044-GQ is suitable for environmental monitoring equipment that combines sensor acquisition, local control, and communications. Its dual ADC subsystems provide selectable 10-bit or 12-bit conversion at up to 100 kSPS, allowing one subsystem to handle higher-resolution measurements while another supports faster sampling. The 25 MHz core provides sufficient throughput for filtering, compensation, threshold management, and data formatting, and the 64 KB Flash holds application firmware and calibration tables. Designers should reserve clean analog routing for sensitive inputs, reference the manufacturer electrical characteristics, and validate sensor excitation and filtering schemes independently of the MCU firmware.

📺

Process-Control Panels

The C8051F044-GQ can serve as the central controller in a process-control panel that acquires analog process variables, drives PWM outputs, communicates with operators, and supervises equipment state. Its 4,352 bytes of RAM and 25 MHz execution speed support real-time control logic, while the 100-pin TQFP exposes substantially more I/O than smaller MCU packages. SPI, UART/USART, SMBus, CAN, and EBI/EMI provide options for local displays, sensors, memory, and supervisory networks. A practical implementation should group analog and digital return paths, follow the manufacturer decoupling recommendations, and verify every peripheral multiplexing option against the final board schematic.

🌐

Communications Equipment

The C8051F044-GQ fits communication modules that need local protocol handling, analog monitoring, and deterministic embedded control. The CIP-51 core executes at 25 MHz, and the device combines CAN, SPI, UART/USART, SMBus, and EBI/EMI in the same package as 64 KB of programmable Flash. This allows a module to frame data, manage buffers, monitor supply or signal conditions, and support service interfaces without relying on a separate microcontroller. Selection should account for protocol timing, interrupt latency, peripheral availability on the selected pins, and whether an external transceiver or connector is required for the physical communications layer.

🚗

Automotive-Style Sensor Node

Although vehicle-grade qualification must be confirmed separately, the C8051F044-GQ can be evaluated for compact sensor-node architectures that need CAN communication, multiple analog inputs, PWM outputs, and local temperature measurement. Its two ADC subsystems support 10-bit or 12-bit conversion at up to 100 kSPS or 8-bit conversion at up to 500 kSPS, while the 64 KB Flash accommodates diagnostic and control routines. The 100-pin TQFP gives designers access to a broad peripheral set, but production automotive use requires explicit qualification, temperature-range, transient, EMC, and program-lifecycle verification rather than relying on general-purpose component suitability.

📡

Precision Data-Acquisition Module

The C8051F044-GQ is appropriate for compact data-acquisition modules requiring more than basic digital logging. Its dual high-speed ADC subsystems can run in 10-bit or 12-bit modes at up to 100 kSPS, or in 8-bit mode at up to 500 kSPS, while the 25 MHz core handles sampling control, filtering, scaling, and data transfer. SPI, UART/USART, and SMBus allow collected information to be sent to a host or storage controller. Achieving useful precision depends on more than nominal ADC resolution: use the manufacturer reference configuration, maintain clean analog grounding, control reference noise, and account for acquisition time and source impedance.

What is the C8051F044-GQ?
The C8051F044-GQ is a 25 MHz, 8-bit mixed-signal microcontroller from Silicon Labs with an 8051-compatible CIP-51 core, 64 KB of programmable Flash, 4.25 KB of RAM, and CAN connectivity. According to the manufacturer datasheet, it also includes two high-speed ADC subsystems, SPI, UART/USART, SMBus, EBI/EMI, PWM, brown-out reset, and a temperature sensor in a 100-pin TQFP package.
What are the key specifications of C8051F044-GQ that engineers should know?
The C8051F044-GQ combines a 25 MHz CIP-51 core with 64 KB of Flash, 4,352 bytes of RAM, a 3 V supply, and two independent ADC subsystems. According to the manufacturer datasheet, the converters support 10-bit or 12-bit operation up to 100 kSPS and an 8-bit mode up to 500 kSPS. Its principal communications interfaces are CAN, SPI, UART/USART, SMBus, and EBI/EMI.
Where can I download the C8051F044-GQ datasheet PDF?
The C8051F044-GQ datasheet can be reached through the datasheet result for this exact MPN at https://octopart.com/datasheet/silicon-labs/C8051F044-GQ. Use the manufacturer document for authoritative pin assignments, memory maps, electrical characteristics, ADC configurations, oscillator requirements, and package drawings. Confirm that the document revision corresponds to the production configuration intended for the design.
Where can I find the C8051F044-GQ pinout?
The authoritative C8051F044-GQ pinout is in the manufacturer pin-assignment table for the 100-pin TQFP package. The device uses the 14 x 14 mm TQFP outline, and its 100 fine-pitch leads require careful PCB escape routing. Use the manufacturer datasheet when assigning power, ground, analog inputs, oscillator, programming signals, and port functions; alternate package outlines must not be used for the -GQ ordering code.
Is the C8051F044-GQ suitable for CAN-based industrial control?
Yes, the C8051F044-GQ is suitable for CAN-based industrial control because it combines a 25 MHz 8051-compatible core with 64 KB of Flash and an integrated CAN controller. The manufacturer datasheet also identifies SPI, UART/USART, SMBus, EBI/EMI, PWM, dual high-speed ADC subsystems, and a temperature sensor. This integration supports compact equipment that must acquire analog measurements and exchange data over several communications interfaces.
What ADC performance does the C8051F044-GQ provide?
The C8051F044-GQ provides two separate high-speed ADC subsystems with selectable conversion architectures. According to the manufacturer datasheet, they can perform 10-bit or 12-bit conversions at up to 100 kSPS, or 8-bit conversions at up to 500 kSPS. The dual-subsystem architecture can help separate analog acquisition tasks, although channel counts, trigger sources, and input ranges must be checked for the selected package and device variant.
Where to buy C8051F044-GQ online?
The C8051F044-GQ can be requested through the “Request a Quote” form on this page. Provide the exact MPN C8051F044-GQ, required quantity, and preferred delivery location so current sourcing and assembly options can be confirmed. Avoid substituting C8051F044-GQR without checking packaging requirements, because its ordering suffix indicates a different reel or shipping format even though it represents the same underlying device family.
What is the price of C8051F044-GQ?
Current C8051F044-GQ pricing is handled through the “Request a Quote” form on this page because market availability and volume requirements affect the final quotation. Submit the exact MPN C8051F044-GQ, target quantity, and delivery terms. The form is the appropriate route for obtaining a current unit-price response rather than relying on an archived listing that may not reflect present inventory or order status.
What is the lead time for C8051F044-GQ?
The current lead time for C8051F044-GQ should be confirmed through the “Request a Quote” form on this page. Include the required quantity and any production schedule so the supply team can return current availability and delivery information. For production planning, preserve the complete ordering code and verify whether the shipment should use the -GQ tray presentation or another authorized packaging designation.
Is C8051F044-GQ in stock?
C8051F044-GQ availability changes with procurement volume and current inventory. Use the “Request a Quote” form on this page to request the latest stock position for the exact MPN and quantity. A live listing can indicate that the part is orderable, but it does not guarantee a specific allocation for every order size or delivery date, so production commitments should rely on the current quotation response.
When should I choose C8051F044-GQ over another C8051F04x device?
Choose C8051F044-GQ when a design specifically needs its combination of a 25 MHz CIP-51 core, 64 KB of Flash, 4.25 KB of RAM, dual high-speed ADC subsystems, CAN, and a 100-pin TQFP. Choose a lower-memory family member when the application does not justify the larger Flash and RAM footprint. Choose a different package variant only after verifying mechanical fit, pin availability, exposed-pad requirements, and assembly capability.
What can replace C8051F044-GQ?
The closest drop-in candidates are other 100-pin C8051F04x devices that retain the same core speed, Flash capacity, package footprint, and principal mixed-signal interfaces. Candidate family parts include C8051F043-GQ, C8051F046-GQ, C8051F047-GQ, C8051F048-GQ, and C8051F049-GQ. Before replacement, verify the complete pin table, ADC channel count and architecture, CAN resources, clock configuration, and interrupt mapping.
Is the C8051F044-GQ the same as C8051F044-GQR?
The C8051F044-GQ and C8051F044-GQR identify the same Silicon Labs device family but use different ordering suffixes for packaging and shipment presentation. They may share the 100-pin TQFP electrical device, yet the -GQ and -GR suffixes must be interpreted according to the manufacturer ordering information. Use the exact suffix required by the PCB assembler, pick-and-place process, moisture-packaging procedure, and incoming-inspection plan.
What is the best cross-brand equivalent for C8051F044-GQ?
A cross-brand equivalent cannot be selected responsibly from the available information because an 8-bit MCU replacement must match not only the 100-pin TQFP footprint but also the CIP-51 instruction set, memory map, peripheral resources, startup behavior, and programming ecosystem. No cross-brand drop-in match is established in the available cross-reference results. Treat a device from another manufacturer as a redesign unless its documentation explicitly confirms electrical, pin, and software compatibility.
C8051F044-GQ vs C8051F042-GQ: which is better for an embedded controller?
The C8051F044-GQ is the better choice when the design needs its documented 64 KB Flash capacity, 4.25 KB RAM, dual 10-bit or 12-bit ADC subsystems, CAN interface, and complete 100-pin TQFP implementation. The C8051F042-GQ is a related 100-pin family member that must be checked for ADC topology, memory, and peripheral differences. Use the manufacturer comparison tables and the exact pin descriptions to determine whether a specific board can be reused without firmware changes.

के लिए इंजीनियरिंग संदर्भ डेटा C8051F044-GQ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the C8051F044-GQ when the application requires the established combination of a 25 MHz 8051-compatible core, 64 KB of Flash, 4.25 KB of RAM, dual high-speed ADC subsystems, CAN, and a 100-pin TQFP. It is especially appropriate for industrial controllers, environmental monitors, process panels, and communication nodes that combine analog measurement with several digital interfaces. The C8051F043-GQ is a sensible family comparison when its ADC topology and peripheral mix satisfy the design; C8051F046-GQ, C8051F047-GQ, C8051F048-GQ, and C8051F049-GQ should be selected when their specific resources improve channel count, interface coverage, or application fit. Treat every proposed replacement as a device-level review rather than an automatic substitution: compare the complete pin table, analog specifications, CAN resources, oscillator options, interrupt mapping, register compatibility, and programming workflow. If any peripheral, package, or firmware dependency differs, budget for schematic, PCB, and software validation before approving the change.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद C8051F043-GQ C8051F046-GQ C8051F047-GQ C8051F048-GQ C8051F049-GQ
Package 100-pin TQFP (14 x 14 mm) 100-pin TQFP (14 x 14 mm) 100-pin TQFP (14 x 14 mm) 100-pin TQFP (14 x 14 mm) 100-pin TQFP (14 x 14 mm) 100-pin TQFP (14 x 14 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Core 8051-compatible CIP-51, 8-bit 8051-compatible CIP-51, 8-bit 8051-compatible CIP-51, 8-bit 8051-compatible CIP-51, 8-bit 8051-compatible CIP-51, 8-bit 8051-compatible CIP-51, 8-bit
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz
Program Memory 64 KB Flash 64 KB Flash 64 KB Flash 64 KB Flash 64 KB Flash 64 KB Flash
RAM 4.25 KB 4.25 KB 4.25 KB 4.25 KB 4.25 KB 4.25 KB
CAN Interface CAN CAN CAN CAN CAN CAN
Integrated Temperature Sensor Yes Yes Yes Yes Yes Yes

मुख्य विशेषताएँ

  • Integrated dual high-speed ADC subsystems (बनामC8051F043-GQ)
  • CAN and mixed-signal integration in one MCU (बनामC8051F046-GQ)
  • Broad serial and external-bus integration (बनामC8051F047-GQ)
  • 100-pin integration without external memory (बनामC8051F048-GQ)

डिज़ाइन नोट्स

Route the 100-pin TQFP with a fine-pitch assembly footprint and verify every pin against the manufacturer package drawing. Keep the oscillator, programming interface, and high-current supply pins on short paths, but preserve the manufacturer's recommended grounding topology. Because this is a mixed-signal device, separate analog inputs from switching or high-current digital nets where the pin arrangement permits it, and inspect the complete board for return-current paths beneath sensitive converter inputs.

Use the manufacturer's reference layout and decoupling values when placing bypass capacitors, analog-reference components, oscillator elements, and programming-interface components. The ADC can operate at up to 100 kSPS in 10-bit or 12-bit mode, so source impedance and acquisition timing should be evaluated rather than treating the conversion rate as a standalone guarantee. Validate the reference voltage and analog input network against temperature, noise, and settling requirements.

Do not infer pin compatibility solely from the shared C8051F04x family name. Before replacing the C8051F044-GQ, compare the complete pin-description table, ADC channels, multiplexing, CAN resources, oscillator options, interrupt vectors, memory map, programming pins, and supply requirements. Firmware may also depend on device-specific registers, so rebuild and test the application whenever the alternative changes the peripheral configuration even if the physical footprint matches.

Plan the 3 V supply rail for both logic load and analog-reference requirements, including startup current, regulator tolerance, and transient response. Follow the manufacturer guidance for decoupling-capacitor placement and the external reference network. Avoid routing converter returns through digital ground paths, and check brown-out and power-on-reset behavior across the complete supply ramp because those functions are explicitly integrated into the C8051F044-GQ.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information. AEC-Q100 is marked not applicable because the device is presented as an industrial microcontroller rather than an explicitly automotive-qualified variant.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

C8051F044-GQ datasheet C8051F044-GQ specifications C8051F044-GQ pinout C8051F044-GQ datasheet pdf C8051F044-GQ equivalent C8051F044-GQ replacement C8051F044-GQ cross reference Silicon Labs C8051F044-GQ C8051F044-GQ 100-TQFP pinout C8051F044-GQ CAN microcontroller C8051F044-GQ ADC application circuit C8051F044-GQ price C8051F044-GQ stock C8051F044-GQ vs C8051F043-GQ

संबंधित कंपोनेंट्स और शब्द

Silicon Labs C8051F044-GQ C8051F043-GQ C8051F046-GQ C8051F047-GQ C8051F048-GQ C8051F049-GQ 8-bit microcontroller mixed-signal MCU 8051-compatible core CIP-51 core embedded microcontroller semiconductor in-system programming CAN controller ADC SPI UART/USART SMBus EBI/EMI PWM temperature sensor 100-pin TQFP TQFP package family surface-mount device
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें