C8051F044-GQ - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs
MPN: C8051F044-GQ ✓ Hoạt độngC8051F044-GQ Tóm tắt
An 8-bit microcontroller is a compact embedded processing device designed to execute control logic, acquire sensor data, manage communication interfaces, and supervise external hardware. The C8051F04x family combines the familiar 8051 instruction set with modern in-system programming, mixed-signal integration, and dedicated communication peripherals. Within the embedded-control hierarchy, the device sits between general-purpose processors and specialized fixed-function controllers.
Key specifications include a 25 MHz clock, 64 KB Flash program memory, 4,352 bytes of RAM, and a 3 V supply. The analog subsystem includes two high-speed ADC subsystems offering 10-bit or 12-bit operation up to 100 kSPS, as well as an 8-bit conversion mode up to 500 kSPS. Supported interfaces include CAN, SMBus, SPI, UART/USART, and EBI/EMI, while integrated features include brown-out detection, power-on reset, PWM, and a temperature sensor.
The mixed-signal architecture is important for compact control designs because sensor acquisition, communication, and control execution share one package and one clock domain. This reduces external circuitry when a design requires several analog channels alongside CAN or serial networking. The CIP-51 core provides 8051-compatible software compatibility while supporting high-speed, pipelined execution and in-system programming.
Typical applications include industrial monitoring equipment, CAN-connected sensors, process-control panels, environmental measurement systems, communications equipment, and compact embedded controllers. The 100-pin TQFP provides enough pins for mixed-signal interfaces, parallel I/O, external memory, and multiple communication functions while remaining compatible with conventional surface-mount assembly methods.
Designers should verify the exact analog-channel configuration, pin multiplexing, oscillator requirements, programming interface, and external component requirements against the manufacturer datasheet. The TQFP footprint also requires careful escape routing for its fine-pitch leads, while the mixed-signal section needs deliberate grounding and decoupling to preserve converter performance.
This page consolidates the principal C8051F044-GQ specifications, verified sourcing data, family drop-in options, and practical design considerations into an engineer-focused reference for MCU selection, PCB implementation, and replacement planning.
Bộ thay thế dễ dàng lắp đặt cho C8051F044-GQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với C8051F044-GQ (cùng hình factor và footprint) — khác nhau ở ADC Maximum Sampling Rate, ADC Subsystems, Package.
C8051F043-GQ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
C8051F046-GQ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
C8051F047-GQ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →C8051F048-GQ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
C8051F049-GQ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
C8051F044-GQ Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 8-bit mixed-signal MCU |
| Processor Core | 8051-compatible CIP-51 core |
| Tần số xung maksimum | 25 MHz |
| Program Memory | 64 KB in-system programmable Flash |
| Program Memory Organization | 64K x 8 bits |
| RAM | 4.25 KB |
| RAM Organization | 4352 bytes, 4096 + 256 bytes |
| Điện áp cung cấp | 3 V |
| ADC Resolution | 10-bit or 12-bit |
| ADC Maximum Sampling Rate | 100 kSPS at 10-bit or 12-bit; 500 kSPS at 8-bit |
| ADC Subsystems | 2 independent high-speed subsystems |
| CAN Interface | 1 CAN interface |
| Serial Interfaces | SPI, UART/USART, and SMBus |
| External Bus Interface | EBI/EMI |
| Hộp | 100-pin TQFP, 14 x 14 mm |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40 °C to +85 °C |
| Integrated Features | Brown-out detection/reset, power-on reset, PWM, and temperature sensor |
Hướng dẫn cấu hình chân C8051F044-GQ 100-pin tqfp, 14 x 14 mm
Cấu hình chân cho C8051F044-GQ (100-pin tqfp, 14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho C8051F044-GQ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
C8051F044-GQ phù hợp cho 6 Áp dụngs: CAN-Connected Industrial Control, Environmental Monitoring, Process-Control Panels, Communications Equipment, Automotive-Style Sensor Node, Precision Data-Acquisition Module.
CAN-Connected Industrial Control
The C8051F044-GQ fits compact CAN-connected industrial controllers because it combines a 25 MHz 8051-compatible CIP-51 core, 64 KB of programmable Flash, and an integrated CAN interface in one 100-pin TQFP package. Its 4.25 KB of RAM supports control state, protocol buffers, and supervisory tasks without requiring an external memory device. Two high-speed ADC subsystems can acquire process or sensor signals at up to 100 kSPS in 10-bit or 12-bit mode, while PWM supports actuator timing. The trade-off is that each analog and communication resource still requires careful pin assignment, grounding, and firmware validation before field deployment.
Được đề xuất
Environmental Monitoring
The C8051F044-GQ is suitable for environmental monitoring equipment that combines sensor acquisition, local control, and communications. Its dual ADC subsystems provide selectable 10-bit or 12-bit conversion at up to 100 kSPS, allowing one subsystem to handle higher-resolution measurements while another supports faster sampling. The 25 MHz core provides sufficient throughput for filtering, compensation, threshold management, and data formatting, and the 64 KB Flash holds application firmware and calibration tables. Designers should reserve clean analog routing for sensitive inputs, reference the manufacturer electrical characteristics, and validate sensor excitation and filtering schemes independently of the MCU firmware.
Được đề xuất
Process-Control Panels
The C8051F044-GQ can serve as the central controller in a process-control panel that acquires analog process variables, drives PWM outputs, communicates with operators, and supervises equipment state. Its 4,352 bytes of RAM and 25 MHz execution speed support real-time control logic, while the 100-pin TQFP exposes substantially more I/O than smaller MCU packages. SPI, UART/USART, SMBus, CAN, and EBI/EMI provide options for local displays, sensors, memory, and supervisory networks. A practical implementation should group analog and digital return paths, follow the manufacturer decoupling recommendations, and verify every peripheral multiplexing option against the final board schematic.
Được đề xuất
Communications Equipment
The C8051F044-GQ fits communication modules that need local protocol handling, analog monitoring, and deterministic embedded control. The CIP-51 core executes at 25 MHz, and the device combines CAN, SPI, UART/USART, SMBus, and EBI/EMI in the same package as 64 KB of programmable Flash. This allows a module to frame data, manage buffers, monitor supply or signal conditions, and support service interfaces without relying on a separate microcontroller. Selection should account for protocol timing, interrupt latency, peripheral availability on the selected pins, and whether an external transceiver or connector is required for the physical communications layer.
Được đề xuất
Automotive-Style Sensor Node
Although vehicle-grade qualification must be confirmed separately, the C8051F044-GQ can be evaluated for compact sensor-node architectures that need CAN communication, multiple analog inputs, PWM outputs, and local temperature measurement. Its two ADC subsystems support 10-bit or 12-bit conversion at up to 100 kSPS or 8-bit conversion at up to 500 kSPS, while the 64 KB Flash accommodates diagnostic and control routines. The 100-pin TQFP gives designers access to a broad peripheral set, but production automotive use requires explicit qualification, temperature-range, transient, EMC, and program-lifecycle verification rather than relying on general-purpose component suitability.
Được đề xuất
Precision Data-Acquisition Module
The C8051F044-GQ is appropriate for compact data-acquisition modules requiring more than basic digital logging. Its dual high-speed ADC subsystems can run in 10-bit or 12-bit modes at up to 100 kSPS, or in 8-bit mode at up to 500 kSPS, while the 25 MHz core handles sampling control, filtering, scaling, and data transfer. SPI, UART/USART, and SMBus allow collected information to be sent to a host or storage controller. Achieving useful precision depends on more than nominal ADC resolution: use the manufacturer reference configuration, maintain clean analog grounding, control reference noise, and account for acquisition time and source impedance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho C8051F044-GQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | C8051F043-GQ | C8051F046-GQ | C8051F047-GQ | C8051F048-GQ | C8051F049-GQ |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | 8051-compatible CIP-51, 8-bit | 8051-compatible CIP-51, 8-bit | 8051-compatible CIP-51, 8-bit | 8051-compatible CIP-51, 8-bit | 8051-compatible CIP-51, 8-bit | 8051-compatible CIP-51, 8-bit |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Program Memory | 64 KB Flash | 64 KB Flash | 64 KB Flash | 64 KB Flash | 64 KB Flash | 64 KB Flash |
| RAM | 4.25 KB | 4.25 KB | 4.25 KB | 4.25 KB | 4.25 KB | 4.25 KB |
| CAN Interface | CAN | CAN | CAN | CAN | CAN | CAN |
| Integrated Temperature Sensor | Yes | Yes | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Integrated dual high-speed ADC subsystems (vsC8051F043-GQ)
- CAN and mixed-signal integration in one MCU (vsC8051F046-GQ)
- Broad serial and external-bus integration (vsC8051F047-GQ)
- 100-pin integration without external memory (vsC8051F048-GQ)
Ghi chú thiết kế
Route the 100-pin TQFP with a fine-pitch assembly footprint and verify every pin against the manufacturer package drawing. Keep the oscillator, programming interface, and high-current supply pins on short paths, but preserve the manufacturer's recommended grounding topology. Because this is a mixed-signal device, separate analog inputs from switching or high-current digital nets where the pin arrangement permits it, and inspect the complete board for return-current paths beneath sensitive converter inputs.
Use the manufacturer's reference layout and decoupling values when placing bypass capacitors, analog-reference components, oscillator elements, and programming-interface components. The ADC can operate at up to 100 kSPS in 10-bit or 12-bit mode, so source impedance and acquisition timing should be evaluated rather than treating the conversion rate as a standalone guarantee. Validate the reference voltage and analog input network against temperature, noise, and settling requirements.
Do not infer pin compatibility solely from the shared C8051F04x family name. Before replacing the C8051F044-GQ, compare the complete pin-description table, ADC channels, multiplexing, CAN resources, oscillator options, interrupt vectors, memory map, programming pins, and supply requirements. Firmware may also depend on device-specific registers, so rebuild and test the application whenever the alternative changes the peripheral configuration even if the physical footprint matches.
Plan the 3 V supply rail for both logic load and analog-reference requirements, including startup current, regulator tolerance, and transient response. Follow the manufacturer guidance for decoupling-capacitor placement and the external reference network. Avoid routing converter returns through digital ground paths, and check brown-out and power-on-reset behavior across the complete supply ramp because those functions are explicitly integrated into the C8051F044-GQ.
Thông tin tuân thủ
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information. AEC-Q100 is marked not applicable because the device is presented as an industrial microcontroller rather than an explicitly automotive-qualified variant.