Silicon Labs

C8051F342-GM - 48MHz USB 2.0 8-Bit MCU | Silicon Labs

MPN: C8051F342-GM ✓ सक्रिय
2.7 V to 5.25 V Vdss 32-QFN, 5x5 mm Package 48 MHz Speed 64 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

C8051F342-GM अवलोकन

Silicon Labs C8051F342-GM is an 8-bit C8051F34x microcontroller with a 48 MHz clock, 64 KB of flash memory, an integrated USB 2.0 function controller, and a 32-QFN 5x5 mm package. It targets compact embedded USB designs that also require analog signal acquisition, on-chip USB clock recovery, and integrated debug support.

An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, and peripherals on one integrated circuit. The C8051F342 belongs to the CISC 8051 microcontroller family and provides a combination of digital control, full-speed USB connectivity, and mixed-signal measurement in a surface-mount package suited to space-constrained USB products.

The C8051F34x family's key features include a 10-bit, 21-channel ADC operating at up to 200 ksps, two comparators, an internal voltage reference, a temperature sensor, and an internal oscillator with ±1.5% accuracy. USB 2.0 support includes an on-board full-speed function controller, integrated transceiver, and on-chip clock recovery, reducing the external circuitry needed for a USB peripheral design.

The device combines 64 KB of flash program memory with 4.25 KB of RAM. Its 8051-compatible core executes at up to 48 MHz and provides two C2 interface pins that can be shared with user functions. According to the Silicon Labs C8051F34x datasheet, the family operates from 2.7 V to 5.25 V over the industrial temperature range of -40°C to +85°C; the internal regulator should be used above 3.6 V.

Typical applications include USB-connected data acquisition, portable instrumentation, industrial control modules, USB-to-serial equipment, human-interface devices, and compact consumer peripherals. The integrated ADC and comparators are especially useful when a design must measure analog inputs and communicate through USB without adding a separate converter.

For PCB design, preserve the recommended USB trace geometry, provide the required USB impedance and decoupling, and route the differential data pair as a controlled-impedance pair. Firmware migration should be checked carefully because peripheral availability, pin multiplexing, clock requirements, and USB behavior must match the target board.

This product overview combines manufacturer specifications, package details, application guidance, and practical replacement analysis to support component selection, schematic review, firmware planning, and sourcing decisions.

के लिए ड्रॉप-इन विकल्प C8051F342-GM — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं C8051F342-GM (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न ADC Resolution, Maximum Clock Frequency, Operating Temperature Range, Package, Product Type.

Silicon Labs
ADC Resolution: 10 bit
Maximum Clock Frequency: 50 MHz
Operating Temperature Range: -40 °C to +85 °C
इसके साथ तुलना करें C8051F342-GM →

C8051F381-GM

✅ ड्रॉप-इन
Silicon Labs
📦 32-QFN (5x5 mm)
8-bit Flash Microcontroller (MCU) · 8051 CISC core · 50 MHz · 48 MIPS · 64 kB · 4.25 kB · 2.7 V to 5.25 V · 10 bit

कीमत के लिए संपर्क करें

डेटाशीट देखें →

C8051F346-GM

✅ ड्रॉप-इन
📦 32-QFN (5x5 mm)
Same QFN32 GM package family; ADC, USB, memory, and peripheral assignments require device-level comparison.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

C8051F342-GM Maximum Ratings और Electrical Characteristics

Product Type 8-bit CISC microcontroller
Core 8051-compatible C8051F34x core
अधिकतम क्लॉक फ़्रीक्वेंसी 48 MHz
Flash Memory 64 KB
RAM 4.25 KB
ADC Resolution 10 bits
ADC Channel Count 21 channels
ADC Sampling Rate Up to 200 ksps
Comparator Count 2
Internal Oscillator Accuracy ±1.5%
USB Version USB 2.0 full-speed
USB Transceiver Integrated
USB Clock Recovery On-chip
Supply Voltage Range 2.7 V to 5.25 V
ऑपरेटिंग तापमान रेंज -40°C to +85°C
पैकेज 32-QFN, 5x5 mm
माउंटिंग प्रकार Surface mount
On-Chip Debug Full-speed non-intrusive in-system debug
C2 Debug Interface Pins 2 shared pins
Internal Voltage Reference Integrated
Temperature Sensor Integrated

C8051F342-GM 32-qfn, 5x5 mm पिन कॉन्फ़िगरेशन गाइड

C8051F342-GM (32-qfn, 5x5 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

C8051F342-GM के लिए 32-qfn, 5x5 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: C8051F342-GM.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

C8051F342-GM के लिए उपयुक्त है 6 अनुप्रयोगs: USB Data Acquisition, USB-to-Serial Control Module, Portable Measurement Instrument, Human Interface Device, Industrial Monitoring Controller, USB Connected Embedded Controller.

📡

USB Data Acquisition

The C8051F342-GM fits compact USB measurement systems because it combines a 10-bit, 21-channel ADC rated up to 200 ksps with a full-speed USB 2.0 function controller. The integrated transceiver and on-chip clock recovery simplify the interface between the analog acquisition section and a USB host. Designers can place sensor conditioning and input protection ahead of the ADC, then configure sampling through firmware. Engineering checks should include analog bandwidth, converter dynamic range, input-source impedance, USB endpoint timing, and controlled-impedance routing of the differential USB data pair.

🌐

USB-to-Serial Control Module

The C8051F342-GM can act as the central controller in a USB-to-serial adapter while also supervising an embedded peripheral. Its 8051-compatible core operates at up to 48 MHz, and the integrated USB controller removes the need for a separate USB interface IC. The 21-channel ADC and two comparators can support input monitoring without immediately expanding the board footprint. Firmware must implement the USB descriptors and command protocol, while the PCB layout should isolate analog and digital return paths and follow the datasheet's USB and decoupling requirements.

🧰

Portable Measurement Instrument

The C8051F342-GM is well suited to portable instruments where USB connectivity, measurement, and control must fit into a compact assembly. Its integrated voltage reference, temperature sensor, two comparators, and 10-bit ADC reduce the number of external components required for basic sensing. The 64 KB of flash supports embedded application code, while 4.25 KB of RAM requires disciplined allocation for buffers and stacks. Low-power behavior, calibration storage, analog settling, and USB-powered current limits should be evaluated together during prototype testing.

🎛️

Human Interface Device

A keyboard, control panel, or configuration interface can use the C8051F342-GM to combine USB peripheral behavior with local analog and status functions. The integrated full-speed USB transceiver and clock recovery provide the physical-layer foundation, while the 8051 core manages HID reports and device logic. Two comparators can monitor thresholds and the ADC can inspect control inputs or sensors. Designers should budget endpoint bandwidth, debounce and scan timing, ESD protection, connector mechanics, and USB routing independently from the MCU firmware.

🏭

Industrial Monitoring Controller

The C8051F342-GM can support compact industrial monitoring equipment that must acquire several analog channels and expose status through USB. Its 21-channel, 10-bit ADC with up to 200 ksps throughput provides a practical sampling resource, and the operating range of -40°C to +85°C supports industrial-temperature requirements. Robust implementations still require input conditioning, surge and transient protection, watchdog strategy, error reporting, and calibrated measurement references. USB isolation may be necessary when the monitored equipment introduces ground offsets or high-energy faults.

🔌

USB Connected Embedded Controller

The C8051F342-GM can serve as a compact embedded controller for accessories that require local logic, analog sensing, and a standard USB connection. Its 64 KB flash, 4.25 KB RAM, two comparators, and 48 MHz maximum clock are sufficient for many control and configuration tasks when firmware remains within the memory budget. The two C2 interface pins support debugging without permanently occupying additional user functions. Production designs should preserve debug access, implement secure firmware updates, validate USB suspend and resume behavior, and verify brownout and power-sequencing conditions.

What are the key specifications of C8051F342-GM that engineers should know?
The C8051F342-GM is an 8-bit 8051-family microcontroller operating up to 48 MHz with 64 KB of flash and 4.25 KB of RAM. According to the Silicon Labs C8051F34x datasheet, it includes a 10-bit, 21-channel ADC sampling at up to 200 ksps, two comparators, an integrated USB 2.0 full-speed controller and transceiver, and a 32-QFN 5x5 mm package. It also provides two C2 debug interface pins, an integrated voltage reference, a temperature sensor, and an internal oscillator specified at ±1.5% accuracy.
What is C8051F342-GM and what does an 8-bit MCU do?
The C8051F342-GM is an 8-bit CISC microcontroller that combines a 8051-compatible core, 64 KB of flash, 4.25 KB of RAM, USB connectivity, and analog peripherals. According to the Silicon Labs C8051F34x datasheet, it runs at up to 48 MHz and includes a 10-bit ADC, two comparators, and an integrated USB transceiver. This combination allows a compact product to execute embedded control software, acquire analog measurements, and communicate with a USB host without requiring separate USB interface hardware.
What is the operating voltage of C8051F342-GM?
The C8051F342-GM operates from 2.7 V to 5.25 V and is specified over -40°C to +85°C. According to the Silicon Labs C8051F34x datasheet, the on-chip voltage regulator must be used for operating voltages above 3.6 V. This range supports both direct low-voltage designs and USB-powered equipment operating from a 5 V bus, subject to the regulator and decoupling requirements described in the datasheet.
Where can I download the C8051F342-GM datasheet PDF?
The official C8051F34x family datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F34x.pdf. It contains the C8051F342-GM electrical characteristics, pin assignments, clock and power requirements, USB interface information, ADC specifications, and package drawings. Use the pin-description table and ordering information when assigning PCB signals, and verify all register and peripheral details against the specific device variant.
Where can I find the C8051F342-GM pinout?
The C8051F342-GM pinout is published in the Silicon Labs C8051F34x datasheet under the package and pin-assignment information. The device uses a 32-QFN package with an exposed pad, so the exposed-pad connection and numbered ball locations must be taken directly from that table. Assign board nets by the datasheet function names, including power, ground, USB differential data, analog inputs, clock, reset, programming, and the two shared C2 interface functions.
How does the USB 2.0 interface in C8051F342-GM work?
The C8051F342-GM includes a full-speed USB 2.0 function controller, integrated transceiver, and on-chip clock recovery. According to the Silicon Labs product page and C8051F34x datasheet, this integration reduces the external USB circuitry needed for a peripheral design. Firmware must configure the USB clock, endpoint, transfer, and interrupt behavior, while the PCB must provide controlled-impedance differential routing, correct supply decoupling, and the connection details specified by the device documentation.
What analog peripherals are built into C8051F342-GM?
The C8051F342-GM integrates a 10-bit, 21-channel ADC capable of 200 ksps sampling, two comparators, a voltage reference, and a temperature sensor. According to the Silicon Labs manufacturer specifications, these resources support mixed-signal USB products in which analog measurement, threshold detection, and digital control are handled by the same microcontroller. The internal oscillator is specified at ±1.5% accuracy, providing another timing reference for designs where an external crystal is unnecessary.
Can C8051F342-GM replace C8051F381-GM?
The C8051F342-GM and C8051F381-GM can share the same QFN32 footprint and have been used as a hardware replacement in reported designs, but firmware migration still requires verification. According to Silicon Labs community information, the F381 has been used as a drop-in replacement for the F342, while USB recognition and software behavior can differ. Validate the pin mux, clock configuration, USB descriptors, peripheral assignments, and application code before treating the substitution as production-approved.
What can replace C8051F342-GM on the same PCB?
The strongest same-package replacement identified for the C8051F342-GM is the C8051F381-GM because both use the QFN32 footprint and have documented hardware-replacement experience. The C8051F342-GMR also retains the same electrical device and QFN32 package but differs only in its orderable packing code, so it does not add engineering differentiation. Verify USB behavior, memory organization, peripheral mapping, startup code, and pin multiplexing before replacing the original part.
Is C8051F342-GM suitable for USB data-acquisition devices?
The C8051F342-GM is suitable for compact USB data-acquisition devices because it combines full-speed USB with a 10-bit, 21-channel ADC rated up to 200 ksps. According to the Silicon Labs manufacturer specifications, the ADC, USB transceiver, clock recovery, and controller are integrated on one microcontroller. The system design must still account for analog front-end bandwidth, input protection, reference accuracy, USB signal integrity, sampling synchronization, and the usable dynamic range of the 10-bit converter.
When should I choose C8051F342-GM instead of C8051F381-GM?
Choose C8051F342-GM when its documented USB and analog peripheral configuration directly matches the existing firmware and board requirements. The C8051F381-GM can be attractive when its additional processing or peripheral capability is validated as beneficial, but substituting it requires checking startup behavior, USB compatibility, memory use, and pin multiplexing. According to Silicon Labs community information, a drop-in hardware swap may work, yet successful USB enumeration and application behavior are not guaranteed without firmware verification.
Is C8051F342-GM the same as C8051F346-GM?
The C8051F342-GM and C8051F346-GM belong to the same Silicon Labs C8051F34x family, but they should not be treated as identical without a device-level pin and peripheral comparison. Both are listed in QFN32 GM package variants, while the C8051F346 is identified as a family member in comparison records. Check the official pin tables, USB implementation, ADC channels, memory organization, and peripheral assignments before using one as a direct substitute.
How many flash, RAM, and ADC resources does C8051F342-GM provide?
The C8051F342-GM provides 64 KB of flash memory, 4.25 KB of RAM, and a 10-bit ADC with 21 input channels. According to the Silicon Labs C8051F34x datasheet, the ADC can sample at up to 200 ksps. These resources support embedded USB firmware and moderate analog acquisition workloads. The available RAM, stack requirement, boot code, USB buffers, and application data must be checked during firmware sizing rather than inferred solely from the nominal flash capacity.
Where can I buy C8051F342-GM and what is its lead time?
The C8051F342-GM can be requested through the Request a Quote form on this page, where package quantity, delivery, and current lead-time requirements should be stated. Manufacturer product information identifies the part as a C8051F34x USB microcontroller, while distributor listings provide sourcing references for this exact MPN. Current production allocation and lead time can change, so request a written quotation for the required quantity and date before committing the design to a schedule.
What is the price of C8051F342-GM?
The current unit price for C8051F342-GM depends on quantity, package quantity, sourcing status, and delivery date. Use the Request a Quote form on this page to request current pricing for the exact C8051F342-GM orderable MPN. The structured pricing information on the page should be treated as the commercial reference because market prices and inventory can change without notice.
Is C8051F342-GM in stock?
Current stock for C8051F342-GM should be confirmed through the Request a Quote form on this page. The form allows you to specify the required quantity, delivery date, and acceptable procurement terms for this exact 32-QFN device. Do not infer availability from general family listings or from the presence of a QFN32 package variant, because stock status can vary by exact suffix, package quantity, and regional distribution center.

के लिए इंजीनियरिंग संदर्भ डेटा C8051F342-GM — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the C8051F342-GM when a compact embedded USB device needs an 8051-compatible controller, a 10-bit 21-channel ADC, two comparators, and USB full-speed support in a 5x5 mm QFN32 footprint. It is especially suitable for USB data-acquisition modules, portable instruments, and monitoring products whose firmware and analog requirements already align with the C8051F34x family. Consider the C8051F381-GM when its additional resources offer a clear advantage and Silicon Labs community guidance confirms that its pin mapping and USB behavior have been validated for the target design; otherwise, retaining the original device reduces migration risk. The C8051F346-GM may suit designs needing a different member of the same family, but its ADC, USB, memory, and peripheral configuration require direct verification. The C8051F342-GMR is the same device in a different orderable packing code and should not be selected merely to create a second alternative. For every substitution, confirm pin multiplexing, startup, memory map, USB enumeration, interrupt priorities, and PCB footprint before production release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद C8051F381-GM C8051F346-GM
Package 32-QFN (5x5 mm) 32-QFN (5x5 mm) 32-QFN (5x5 mm)
Brand Silicon Labs Silicon Labs Silicon Labs
Architecture 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC

मुख्य विशेषताएँ

  • Combines USB connectivity with integrated analog acquisition (बनामC8051F381-GM)
  • Compact 32-QFN integration (बनामC8051F346-GM)
  • Single-chip USB peripheral implementation (बनामC8051F346-GM)

डिज़ाइन नोट्स

Route the USB differential pair as a controlled-impedance pair with closely matched length and geometry, and place the associated USB support components in accordance with the manufacturer's reference layout. Keep switching nodes and high-current paths away from the USB pair, analog inputs, and reference circuitry. The integrated transceiver simplifies component count, but it does not remove the need for correct connector geometry, return-path continuity, decoupling, and ESD protection.

Plan the 2.7 V to 5.25 V supply path carefully because the C8051F34x family requires its internal regulator for operation above 3.6 V. Place the required bypass capacitors close to their designated power and ground pins, provide a low-impedance ground reference, and keep analog and digital return currents from sharing noisy paths. Verify startup, brownout, USB suspend, and peripheral activity in the final power-supply design rather than relying only on nominal voltage measurements.

Do not assume that a shared QFN32 footprint guarantees identical firmware behavior. Check the pin table, port multiplexing, clock requirements, USB controller implementation, ADC channels, interrupt mapping, startup code, and memory organization for every proposed substitute. Keep the two C2 interface pins available when possible and follow the documented debug connection so production programming and troubleshooting remain practical.

Treat analog inputs as precision signals: establish the required source impedance, acquisition time, and bandwidth before selecting the sampling rate, and keep high-current or fast-switching nodes away from sensitive channels. The integrated 10-bit ADC can sample at 200 ksps, but conversion speed alone does not guarantee usable accuracy. Validate the complete front end with the selected reference, protection network, grounding, firmware averaging strategy, and production load conditions.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit compliance declarations for the exact C8051F342-GM were included in the manufacturer or distributor information. The industrial temperature specification describes environmental operation and is not itself an AEC-Q100 qualification statement.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

c8051f342 datasheet C8051F342-GM datasheet PDF C8051F342-GM specifications C8051F342-GM pinout C8051F342-GM QFN32 C8051F342-GM USB controller C8051F342-GM ADC C8051F342-GM replacement C8051F342-GM vs C8051F381-GM Silicon Labs C8051F342-GM C8051F342-GM price C8051F342-GM stock C8051F342-GM USB data acquisition C8051F342-GM cross reference

संबंधित कंपोनेंट्स और शब्द

Silicon Labs C8051F342-GM C8051F381-GM C8051F346-GM C8051F34x 8051-compatible core 8-bit microcontroller CISC microcontroller embedded system USB 2.0 full-speed USB transceiver on-chip clock recovery 10-bit ADC 21-channel ADC 200 ksps comparator voltage reference temperature sensor internal oscillator C2 interface on-chip debug 32-QFN QFN package family surface-mount technology 64 KB flash memory 4.25 KB RAM industrial control USB data acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें