C8051F342-GM - 48MHz USB 2.0 8-Bit MCU | Silicon Labs
部品番号: C8051F342-GM ✓ 生産中C8051F342-GM 概要
An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, and peripherals on one integrated circuit. The C8051F342 belongs to the CISC 8051 microcontroller family and provides a combination of digital control, full-speed USB connectivity, and mixed-signal measurement in a surface-mount package suited to space-constrained USB products.
The C8051F34x family's key features include a 10-bit, 21-channel ADC operating at up to 200 ksps, two comparators, an internal voltage reference, a temperature sensor, and an internal oscillator with ±1.5% accuracy. USB 2.0 support includes an on-board full-speed function controller, integrated transceiver, and on-chip clock recovery, reducing the external circuitry needed for a USB peripheral design.
The device combines 64 KB of flash program memory with 4.25 KB of RAM. Its 8051-compatible core executes at up to 48 MHz and provides two C2 interface pins that can be shared with user functions. According to the Silicon Labs C8051F34x datasheet, the family operates from 2.7 V to 5.25 V over the industrial temperature range of -40°C to +85°C; the internal regulator should be used above 3.6 V.
Typical applications include USB-connected data acquisition, portable instrumentation, industrial control modules, USB-to-serial equipment, human-interface devices, and compact consumer peripherals. The integrated ADC and comparators are especially useful when a design must measure analog inputs and communicate through USB without adding a separate converter.
For PCB design, preserve the recommended USB trace geometry, provide the required USB impedance and decoupling, and route the differential data pair as a controlled-impedance pair. Firmware migration should be checked carefully because peripheral availability, pin multiplexing, clock requirements, and USB behavior must match the target board.
This product overview combines manufacturer specifications, package details, application guidance, and practical replacement analysis to support component selection, schematic review, firmware planning, and sourcing decisions.
ドロップイン代替品: C8051F342-GM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F342-GM (同一形状・フットプリント) — 相違点: ADC Resolution, Maximum Clock Frequency, Operating Temperature Range, Package, Product Type.
C8051F381-GM
✅ ドロップイン価格はお問い合わせください
データシートを見る →C8051F346-GM
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F342-GM 最大定格&電気的特性
| Product Type | 8-bit CISC microcontroller |
| Core | 8051-compatible C8051F34x core |
| 最大クロック周波数 | 48 MHz |
| Flash Memory | 64 KB |
| RAM | 4.25 KB |
| ADC Resolution | 10 bits |
| ADC Channel Count | 21 channels |
| ADC Sampling Rate | Up to 200 ksps |
| Comparator Count | 2 |
| Internal Oscillator Accuracy | ±1.5% |
| USB Version | USB 2.0 full-speed |
| USB Transceiver | Integrated |
| USB Clock Recovery | On-chip |
| Supply Voltage Range | 2.7 V to 5.25 V |
| 動作温度範囲 | -40°C to +85°C |
| パッケージ | 32-QFN, 5x5 mm |
| 実装タイプ | Surface mount |
| On-Chip Debug | Full-speed non-intrusive in-system debug |
| C2 Debug Interface Pins | 2 shared pins |
| Internal Voltage Reference | Integrated |
| Temperature Sensor | Integrated |
C8051F342-GM 32-qfn, 5x5 mm ピン配置ガイド
C8051F342-GM (32-qfn, 5x5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F342-GM.
詳細は データシート をご参照ください。
主な用途
C8051F342-GM の用途: 6 件s: USB Data Acquisition, USB-to-Serial Control Module, Portable Measurement Instrument, Human Interface Device, Industrial Monitoring Controller, USB Connected Embedded Controller.
USB Data Acquisition
The C8051F342-GM fits compact USB measurement systems because it combines a 10-bit, 21-channel ADC rated up to 200 ksps with a full-speed USB 2.0 function controller. The integrated transceiver and on-chip clock recovery simplify the interface between the analog acquisition section and a USB host. Designers can place sensor conditioning and input protection ahead of the ADC, then configure sampling through firmware. Engineering checks should include analog bandwidth, converter dynamic range, input-source impedance, USB endpoint timing, and controlled-impedance routing of the differential USB data pair.
おすすめ
USB-to-Serial Control Module
The C8051F342-GM can act as the central controller in a USB-to-serial adapter while also supervising an embedded peripheral. Its 8051-compatible core operates at up to 48 MHz, and the integrated USB controller removes the need for a separate USB interface IC. The 21-channel ADC and two comparators can support input monitoring without immediately expanding the board footprint. Firmware must implement the USB descriptors and command protocol, while the PCB layout should isolate analog and digital return paths and follow the datasheet's USB and decoupling requirements.
おすすめ
Portable Measurement Instrument
The C8051F342-GM is well suited to portable instruments where USB connectivity, measurement, and control must fit into a compact assembly. Its integrated voltage reference, temperature sensor, two comparators, and 10-bit ADC reduce the number of external components required for basic sensing. The 64 KB of flash supports embedded application code, while 4.25 KB of RAM requires disciplined allocation for buffers and stacks. Low-power behavior, calibration storage, analog settling, and USB-powered current limits should be evaluated together during prototype testing.
おすすめ
Human Interface Device
A keyboard, control panel, or configuration interface can use the C8051F342-GM to combine USB peripheral behavior with local analog and status functions. The integrated full-speed USB transceiver and clock recovery provide the physical-layer foundation, while the 8051 core manages HID reports and device logic. Two comparators can monitor thresholds and the ADC can inspect control inputs or sensors. Designers should budget endpoint bandwidth, debounce and scan timing, ESD protection, connector mechanics, and USB routing independently from the MCU firmware.
おすすめ
Industrial Monitoring Controller
The C8051F342-GM can support compact industrial monitoring equipment that must acquire several analog channels and expose status through USB. Its 21-channel, 10-bit ADC with up to 200 ksps throughput provides a practical sampling resource, and the operating range of -40°C to +85°C supports industrial-temperature requirements. Robust implementations still require input conditioning, surge and transient protection, watchdog strategy, error reporting, and calibrated measurement references. USB isolation may be necessary when the monitored equipment introduces ground offsets or high-energy faults.
おすすめ
USB Connected Embedded Controller
The C8051F342-GM can serve as a compact embedded controller for accessories that require local logic, analog sensing, and a standard USB connection. Its 64 KB flash, 4.25 KB RAM, two comparators, and 48 MHz maximum clock are sufficient for many control and configuration tasks when firmware remains within the memory budget. The two C2 interface pins support debugging without permanently occupying additional user functions. Production designs should preserve debug access, implement secure firmware updates, validate USB suspend and resume behavior, and verify brownout and power-sequencing conditions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F342-GM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F381-GM | C8051F346-GM |
|---|---|---|---|
| Package | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Architecture | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC |
主な差別化要因
- Combines USB connectivity with integrated analog acquisition (vs C8051F381-GM)
- Compact 32-QFN integration (vs C8051F346-GM)
- Single-chip USB peripheral implementation (vs C8051F346-GM)
設計ノート
Route the USB differential pair as a controlled-impedance pair with closely matched length and geometry, and place the associated USB support components in accordance with the manufacturer's reference layout. Keep switching nodes and high-current paths away from the USB pair, analog inputs, and reference circuitry. The integrated transceiver simplifies component count, but it does not remove the need for correct connector geometry, return-path continuity, decoupling, and ESD protection.
Plan the 2.7 V to 5.25 V supply path carefully because the C8051F34x family requires its internal regulator for operation above 3.6 V. Place the required bypass capacitors close to their designated power and ground pins, provide a low-impedance ground reference, and keep analog and digital return currents from sharing noisy paths. Verify startup, brownout, USB suspend, and peripheral activity in the final power-supply design rather than relying only on nominal voltage measurements.
Do not assume that a shared QFN32 footprint guarantees identical firmware behavior. Check the pin table, port multiplexing, clock requirements, USB controller implementation, ADC channels, interrupt mapping, startup code, and memory organization for every proposed substitute. Keep the two C2 interface pins available when possible and follow the documented debug connection so production programming and troubleshooting remain practical.
Treat analog inputs as precision signals: establish the required source impedance, acquisition time, and bandwidth before selecting the sampling rate, and keep high-current or fast-switching nodes away from sensitive channels. The integrated 10-bit ADC can sample at 200 ksps, but conversion speed alone does not guarantee usable accuracy. Validate the complete front end with the selected reference, protection network, grounding, firmware averaging strategy, and production load conditions.
コンプライアンス情報
No explicit compliance declarations for the exact C8051F342-GM were included in the manufacturer or distributor information. The industrial temperature specification describes environmental operation and is not itself an AEC-Q100 qualification statement.